similar to: Mahler's Book - New Project

To All; My current issues is a 5 second delay for call that is being transferred from the Norstar units to the Asterisk servers VIA a PRI. Is their anything that can be done to speed up the transfer on the Norstar. Below is my current phone config. < Norstar1 >----PRI----< Asterisk-1 >----IP-WAN----< Asterisk-2 >---PRI---< Norstar2> The Norstars are MICS 0x32 4.1

I am looking at setting up the following configuration and any help/input/comments before signing the PRI contracts will be greatly appreciated. PRI Tampa PRI Sarasota PRI <--> Nortel BCM-->Asterisk<------------------>Asterisk<---> I would like to link the Nortel BCM to * using the a digital trunk card. The BCM will

What models? Jeff Noxon (jeff-asterisk at planetfall.com) wrote*: > >I just purchased a bunch of Nortel Meridian POTS phones that support >intercom on the 3rd pair. I intend to get it working with Asterisk. >The phones support MWI, have a 3-line display, callerID, call waiting >callerID, 2 lines...very nice. > >On Thu, Feb 27, 2003 at 01:07:19AM -1000, James H. Thompson

Out of the blue i started receiving the following error on my PRI line which connects my asterisk server to a Norstar 0x32 key system. The asterisk zaptel.conf file was configure as follows and this config worked for 6 months until friday. Nothing was changed on either system prior to friday. here is teh zaptel.conf span=1,0,0,esf,b8zs bchan=1-23 dchan=24 span=2,0,0,esf,b8zs bchan=25-47 dchan=48

I am currently working on an Asterisk test system, and will be presenting a demo to the Board of Directors tomorrow night. I want to make sure I have all of my ducks in a row. The Asterisk system will be used to replace a Norstar MICS. The location has two PRI's coming in, with a few hundred DIDs. I know how to make * use the DIDs incoming, and I know how Nortel uses the DIDs. Now for the

Hi, Looking through the source code, I see two functions in the 'libpri' code for message-waiting: pri_mwi_activate, and pri_mwi_deactivate, but they are not used by anything anywhere. Is there a sample application somewhere which makes use of these functions? I believe that the ISDN MWI is used when a Norstar MICS has an external voicemail provider. I don't know exactly how this

I have been investigating more tight integration between * and the Nortel MICS... it appears that it is at least theoretically possible to have * store voicemail and log which stations call where. Both require a T1 card. The T1 card requires either a clocking module or the 6-port fiber module to provide T1 timing. Naturally a T100P or TE405P is required on the * side. To log which

The last post I saw regarding this was June 2003 (before my time with *, I started in September): http://lists.digium.com/pipermail/asterisk-users/2003-June/013324.html Is there any support for Q.SIG in * at all? The Norstar MICS uses a MCDN (Meridian Customer Defined Network) key to enable the "SL1" protocol which from everything I've been reading is just Q.SIG. This protocol

I have a PRI link up and running between Asterisk and a Nortel Norstar MICS v4.1 . I'm having a problem getting the textual Caller Name across the link from Ast to Ns, however numeric Caller ID arrives and displays fine. From Ns to Ast both elements come through fine. I'm forcing dummy values for testing using: exten => s,1,SetCIDName(Test) exten => s,2,SetCallerID(1234561234)

Unfortunatly no on both counts. The arrangement right now has: PSTN Trunks & Stations <-> Nortel Norstar#1 <-CT1-> Asterisk#1 <-IAX2-> Asterisk#2 <-CT1-> Nortel Nortstar#2 <-> Stations The Asterisk boxes provide Voicemail to their sites Norstars and intersite calls over IAX. Local Voicemail works flawlessly at each site but there have been reports of PSTN calls

I have gone through some archive about Nortel MICS (Meridian ?)+ Asterisk Integration but I'm not sure whether same as my case . 70 telephone sets | | Nortel MICS 4.1 --------- Asterisk | PSTN I have read the David Gomillion's Guide and got the idea . However, my plan is slightly different from what he did , I need to use Nortel MICS to connect to PSTN (I

Hi there! We have an old legacy norstar phone system m8x24-ds ( dr5 ) and a couple of m0x16. It has 5 external analog lines. It has no auto attendant, and no voicemail. So every incoming call is forwarded to a operator, she pick up the phone, talks to the caller and transfer the call to the right extension. We are in Argentina, so buying a star talk is out of the question, there is no selling of

Hello, I''m farily new to RoR and am having a problem trying to retrieve data from my database. Here is the code from my controller: def index zip = params["zip"] @zip1 = Zipcode.find(:first, :conditions => ["zip = ?", zip]) lat = @zip1.latitude.to_f long = @zip1.longitude.to_f radius = 50 @bookstores = Bookstore.find_by_sql ["SELECT * FROM

I'm looking for a way to give VoIP capabilities to an existing PBX: it's made by Mitel and it's used in a small/medium environment (a few dozen phones, but the PBX has capabilities for up to 200, if i remember correctly). Any high-level guidelines on how to integrate Asterisk with a PBX that's already in use? Probably that particular PBX is not supported directly, but are there

Does anyone know which signalling protocol works when connecting the output of a NT8B90AL Norstar ATA2 analog terminal adapter to an FXO card? (fxsks, fxsgs, fxsls?) I'm trying to add an Asterisk branch to my Norstar PBX as outlined at http://www.voip-info.org/wiki-Asterisk+Nortel. - Mike

Hi, I have a legacy Norstar system that I'm looking into integrating with my Asterisk setup. My first attempts have worked, which involves a Wildcard X100P FXO card in the * box connected to the Internal ATA (FXS port) on the Norstar system. Calling from SIP -> Norstar works fine, since the SIP caller initiated the call and generally will be sane enough to hangup the phone when

> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Gary Reuter > Sent: Thursday, August 11, 2005 12:59 PM > To: asterisk-users@lists.digium.com > Subject: Re: [Asterisk-Users] PRI dropped calls w/ asterisk dropped > betweenpstn & norstar > > > I poured over my logs most of

Hi all, I've seen a couple of posts recently from people who are doing something with Asterisk and a T100P and a Nortel PBX. However it's not clear exactly what they are doing. Does anyone know if it's possible to use a T100P or T400P as a DSX-1 interface to connect to a T1/PRI CO module in a Nortel PBX? We have a Nortel Norstar Modular ICS PBX and I'd like to plug its CO

Sorry, I know it's OT, but does anyone know of a relatively inexpensive headset that is compatible with the Cisco 7960? I've tried the headset off Norstar phones, doesn't seem to work with or without the amp. ------------------------------------------------------------------------ | nate carlson | natecars@natecarlson.com | http://www.natecarlson.com | | depriving some poor

Hi, We have a central Samba server which works fine. It also supplies WINS services which work fine. It also builds a browse list which seems to work fine. However, when I open 'Entire Network' on my W95 desktop machine on another subnet, I only see the workgroups / hosts on my subnet. The 95 machine is pointing to the Samba server as a WINS server. If I change the workgroup of