similar to: IAXY with DNS name, not IP

There is no DNS functionality built into the IAXY, I am assuming you want to be able to home onto a SOHO site with a dynamic IPaddress. I have not been able to figure out a clean way to do theis (make it easy for the roaming sales-folk etc,) who will not have a high tolerance for running something like an IAXYPROV. You would need to somehow have an external fixed address which would

Tie line is type em_w (old school stuff) to TE110P. Phone rings on the asterisk side, but the calling party does not hear the ring through sound. If I pick it up within the first two rings it goes through and I can talk otherwise our old switch drops the call. Anyhow...here is my config if anyone can shed some light on it. It used to work with HEAD a few weeks ago. -Matt

Hi * users, I want to know if STUN suport is available with Asterisk. Kindly let me know. I have posted this also in DEV list but none replied to me. thanks, Somesh -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050808/e26855c9/attachment.htm

The cheap ones on EBay won't work with the SC420 server. I have one and can't make any of the clones work. I do have one TDM40B card for analog stations that works well. The problem with the SC420 is that it won't let you set the interrupts yourself and you end up with interrupts being shared. =============================================================== Message: 26 Date:

Hello, I am trying to let someone know that is being called from a specified location. For that, the command: exten => _107.,1,Dial(SIP/SIPGW/${EXTEN:3},30,A(Anounce.gsm)) should let the called person hear Anounce.gsm as soon as he/she answers. (Only calls with prefix 107 are given this notice). The call proceeds fine, but no one hears AnounceSPF.gsm. I tried putting this file in every

I just bough a Sipura SPA-2100 to use with Asterisk. When I use the analog handset plugged into the SPA-2100, the person on the other end can hardly hear me. I check the SPA-2100 setup and their is no mic/spk gain control. Is this a problem with the SPA-2100 or with Asterisk? Any way for asterisk to compensate for the poor audio level (if the problem is the SPA-2100)? Thanks, Mike

I've just gotten off a skype conference call and it pisses me off that the quality of skype is higher than my asterisk calls. Is there such a thing as a super high bandwidth codec? In a situation that you have the bandwidth to share is there something that I can use for important calls when the situation warrants it? TIA, Dean -------------- next part -------------- An

is it possible to register asterisk in a sip proxy as if it were a terminal (like a cisco ATA)? how? Thanx Jenna ;) ___________________________________________________________ 1GB gratis, Antivirus y Antispam Correo Yahoo!, el mejor correo web del mundo http://correo.yahoo.com.ar

I have a brand new IAXy I'm playing with. I do not get a dialtone on the phone, or any response at ll on the phone. No sound, no dialing, no ringing. The phone and wire are tested and known to be good. I think I have it setup correctly. When I give the iaxprov command I get this: #iaxyprov 192.168.1.90 iaxy.conf 02: c0 a8 01 5a 05: 11 d9 03: ff ff ff 00 04:

Hi, I've got an IAXy, and provided it with connection data - unfortunately didn't provide a fixed ip address, but left with dhcp. Everthing went fine, and I could work a while with it. After a restart of IAXy, it didn't negotiate a new IP address, nor used the old one. I even restarted the DHCP server and cleared its cache. No success. I went to another office with a different

I need a cheap simple adaptor for analog phones to use with Asterisk. It should be some kind of "configure and forget" type of device, to use at the office, or just throw it in a road warrior's bag and use it while travelling, to call back to the "mothership". I can't decide between iaxy and sipura. Can you guys help? Which one would you use? (and why?) I feel that iaxy

For anyone playing around with IAXy(S100i) devices, I am making the following available: Windows IAXy Provision v1.00 This is a from-the-ground-up development of a means of provisioning IAXy devices using a Windows environment. For some users, being bound to Linux for IAXy provisioning is not viable or convenient in some cases. This application provides a GUI data entry for the various IAXy

I'm having a problem with my IAXy not always connecting to my Asterisk box. When I pick-up the phone plugged in to the IAXy I get a busy signal. I have to hang-up the phone and wait a few seconds after the orange LED goes out and then try again. When this happens I don't see any connection attempts in the Asterisk -r output. When I do get the IAXy to connect to Asterisk I get a

Hi.. I have to setup an extension in a remote location that will use a cordless analog telephone.. I am looking at the IAXY to do this for me..Basically the data path will be as follows... [Asterisk] == (NAT) == {Internet} == (NAT) == ATA -- Handset Since there are two NAT boxes in the path I know SIP won't work.. I also don't want to move the Asterisk box to the internet side of the

Hi all, I have a Soekris net4801-50 board with OpenBSD 3.9 where I've configured a dhcp server and tested it with a regular PC connected directly via a crossover cable with success. The problem comes when I try to connect my IAXy device instead of the PC. I can see with 'tcpdump -nettti sis1' that the IAXy isn't sending any packets to the dhcp server. I thought my IAXy was bad

Ok, I searched the lists and found no definitive answer. I'm assuming the IAXy has some primitive form of echo cancel, is there anyway to adjust this? Or any ideas on what to do instead. Here's the setup, this will not be a typical setup for our company however, well whatever. Anyway it looks like this: IAXy --> Netgear router --> Charter --> Level3 --> Asterisk --> VOIP or

Hey Everyone, I recently purchased a few IAXy units for some testing, and have come across a some problems. One of them can be provisioned but will not ring the connected telephone. It also does not provide a dial tone when you pick up the phone. When a call is made to the IAXy one of the green lights on the board goes from a solid on state, to a flashing state that coincides with the

Yesterday I was using one of the cheap Radio Shack phone polarity on various phone outlets in my house and ended up plugging it into my IAXY. While the regular phone jacks tested OK, the IAXY tested as being reverse polarity. The tester was plugged directly into the IAXY so there is no chance of this being caused by crossed wires. Is this something that is misconfigured on the IAXY, a hardware

Hi, I have three Iaxy devices (s101i) parts. Two of them seem to work fine. The third plays a loud repeating click sound when an analog phone is plugged in. I can provision all of them, and make calls to all of them. The clicking one will blink when a call is incoming, but no audio from the call can be heard on the handset, and the caller only hears silence. The same handset works on the

In the mailing list archives, I found a message that indicates that the IAXy has the ulaw, alaw, and g726 codecs, but I cannot find anything official on Digium's site about it. The Installation Manual has an example iax.conf file that indicates the ulaw codec, so I know that one is good. But we are thinking about using the IAXy over a VPN, to replace our MultiVoip. alaw and ulaw are