similar to: two extensions for same phone

I happen to have a WIP-5000 phone. I can send text messages to the phone no problem. The phone also has a feature "Write Msg". I use it and enter a valid extension for a WIP-5000 phone (so It will receive the text message) and enter some small message and hit send... I get a "405 Method not allowed error". Is there something I dont have setup to be able to send text from a

I am sending an email from my machine devcentos5x64. the transcript below (hangs for 60 seconds) at the line: MAIL From:<root at devcentos5x64.msgnet.com> SIZE=56 AUTH=root at devcentos5x64.msgnet.com The email succeeds - but I am trying to figure out the 60 second delay. Neither email server is busy. Nothing is waiting. the DNS on both machines point to the same nameserver. The DNS

To continue here with problems on this compaq v2000 laptop, I put kernel source on a USB disk and plugged it into the v2000. NOTHING IS recognized. I tried to manually mount the disk and nothing either... I thought USB was well established.... I thought trying to recompile the kernel for realtek support might get my networking going... I am stuck??? Jerry -------------- next part

hi all, running centos 4.7 i686. I seem to have an o pen r elay sendmail server. How do I close it? I have the STRAIGHT centos install sendmail.mc file. Only thing I changed was: dnl DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl so as to allow incoming email and not just localhost. however this seems to relay everyone. I looked at http://www.sendmail.org/tips/relaying but it

Hi, I understand SendText() sends text on the current channel. Is there a way to manipulate this feature to SendText toward another SIP device? I use Polycom IP600's. Local sendtext works fine. Would be nice to drop an instant message on another user's phone. thanks! Mark

I am trying to hwclock to set the time. (hwclock -w) this is what I get on standard 5.2 x86_64. hwclock --debug hwclock from util-linux-2.13-pre7 hwclock: Open of /dev/rtc failed, errno=19: No such device. No usable clock interface found. Cannot access the Hardware Clock via any known method. [root at devcentos5x64 src]# ls -l /dev/rtc crw------- 1 root root 10, 135 Feb 6 13:32 /dev/rtc Any

Hello, I'm using Asterisk 1.6.2.0 and I like to use escape characters with SendText, because I can just delete the message from my phone (Thomson Speedtouch ST2030) display by sending a return-char (\n). But \n is not escaped: I tried already: exten => 222, n, SendText(\n) exten => 222, n, SendText("\n") exten => 222, n, SendText('\n') exten => 222, n,

What is needed to get DAHDI to start up correctly on CentOS 7 and systemd... I am using DAHDI-linux-complete 2.11.1 I saw mention in my search that it has been fixed after 2.11.1 but cannot find what the fix is. Thanks, Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

I am trying to plug a USB 2 device in a USB 3 slot. Nothing is being detected in "lsusb". Is there something special I need to do? I am running centos 5.5 x86_64. I thought 3.0 was backward compatible. Nothing special about my device its an RS232 to USB device. It works in 2.0 slot. Thanks, Jerry

I have a handful of 7912's connected to my asterisk 1.2.14 server. (6 to be exact). I get the X on the display sometimes for loosing registration. I have the config file for the 7912's SipRegInterval: 60 and asterisk is the default. ; maxexpirey=3600 ;defaultexpirey=120 I've not changed them. How can I keep these phones online and stop loosing registration? Thanks, Jerry

I was just wondering if there are special tricks people do that compile A LOT on centos? Do RAM disks help or something else I dont about that minimizes your compile time? I presently have and AMD x2 4800+ with 2GIG ram. Just curious if I can reduce any more time out of my compiles. Jerry

Hi all, I have setup my Cisco 79XX phone. Did the tftp, put the config files in the right location with the right names. Booted my phone, it does the tftp things, the screen shows my extensions everything seems fine. However, when I come offhook and try to dial 11 which is just a playback of demo-congrats in the dialplan the phone says Calling Out (INV) below is my sip.conf file - I presume it

I have 3 phones P1 is a non video phone - grandstream P2 is a Grandstream GXV3000 P3 is a Grandstream GXV3000 Using P1 to place a call to P2 I get audio only (as expected). Then on P1 I transfer the call to P3 and I still only get audio. At this point shouldn't the two video phones P2 and P3 say to each other we are video and so startup the video stream??? This is not working at this time?

I am trying to do an rsync or scp from machine1 to machine2. I am getting arg list to long. I am using centos 5 machine 1 and centos 4.5 on machine2. I am using the default shell which is bash. How can I get past this? THanks, Jerry

I am wanting to use the mkfs.hfsplus as mentioned here http://www.oli.id.au/createosxdmgdiskimagesinlinux but I dont have the command. yum provides "*/mkfs.hfsplus" returns no packages found. Where do I find this command? Thanks. Jerry

I have added the three lines to the sip.conf file based on the latest changes from broadvoice. I can receive incoming calls but cannot place any outgoing calls. The error I get is: *CLI> -- Registered to '69.73.19.178', who sees us as IPADDRESS:4569 -- Attempting call on SIP/Broadvoice/5068012 for application Playback(demo-congrats) (Retry 1) Mar 8 08:35:21 NOTICE[29290]:

Apparently Verizon is blocking or changing packets on port 5060 so my softphone from my hotspot will not work. How do I set asterisk (11.23.0) to run default 5060 for all other devices I have - BUT for my software run on a different port like 5070? I'm using linphone and is easy to change the ports from 5060 to 5070 ( I think). Thanks, Jerry -------------- next part -------------- An HTML

hi all, I have gone through the process of self signing certificates. Aside from the pop-ups about not trusted etc... everything appears to work. For "internal" applications what do people/places do? It would be nice to be seamless and have the "your not trusted" window pop-up. Yet this is not a public web site either. Just internal use. The server might be on the internet

I was installing centos 5.3 x86_64 on a sempron 2.7G machine with 512M ram. The install started off fine then REALLY SLOWED down about 70% into install. I did have a swap space. after that it just crawled. I tried restart the install a couple times at 512M. Same thing around 70% the slow down. I then put in 1G of RAM and everything zipped on past and finished fine. Does 5.3 have minimum

New to asterisk so please be gentle. I'm guessing I'm among a number of recent additions to the list after the article in Linux Mag. I gotta say I'm *very* intersted in the project and will be doing lots of reading shortly. A couble quick questions first... How suitable is Asterisk for use as an IVR providing callers with textual data out of a database? Can it be combined easily