similar to: one-way IAX trunking

Hello, I've problems with following - ----- --- --- PSTN | --- isdn --- | A | ----- iax2 ------ | B | ----- --- --- On [B], there is unconditional call forwarding set back via [A] (dialparties.agi is used) to PSTN. So, call from PSTN is routed via [A] to [B] and than back again into PSTN.

Hello, After checking out CVS HEAD from yesterday (for those new PLC/Jitterbuffer patches), I was affected by bug 3795 with my Polycom IP600's. After seing it resolved as of this morning (thanks Mark), I decided to try again... I can answer incoming calls. No problem there. Putting calls on hold, however, results in my Polycom IP600 indicating the call on hold, but the caller does

I've been having 'gappy' audio problems with nufone for about a week now but I think I've nailed it down. Setup: office* - iax2 - colo* - iax2 - nufone office* and colo* are identical physical hardware (Xeon 2.8, dual ethernet, solely used for Asterisk) -- they are joined together through their second ethernet ports over a dedicated 2meg SDSL link. One hop between office* and

Hi, this is the scenario: One * is placed in a central location with more than enough up/down bandwidth. One * is placed behind a DSL 3000/384. Both * are linked via IAX trunking. Everything is fine until the upload channel of the remote site is filled with a download, then heavy voice distortion starts. Well of course this is expected. So I fooled around with HFSC QoS scheduling on the remote

Hello List, I am currently having a bit of a strange issue with a pair of asterisk servers that we recently set up. For a bit of background, this particular business has two sites in two different towns, about 10 minutes apart. They have 3 analogue PSTN lines connected to the asterisk servers at each location, via a Sangoma A200 (with HEC). They are trying to have just the one receptionist for

Ok sorry for not being specific. I am having a problem when people outside call in to my number which terminates at VoicePluse then The send IAX to me and I do not get any tones. People press buttons but it just goes to the next dialplan fall through. It happens 60-70% of the time. extentions.conf [general] static=yes writeprotect=no autofallthrough=yes clearglobalvars=no priorityjumping=no

Hi, I have a customer who experiences, once in a while, one-way audio... That is... they can hear the person they called, but the person can not hear them. The customer is connected via IAX2 to our softswitch. On the customer's end I have the following config in iax.conf: [general] bindport = 4569 ; Port to bind to (IAX is 4569) bindaddr = 0.0.0.0 ; Address to bind to (all

We have a machine with a TE410P in it acting as a client to route calls via iax2 to our central server, caller --> ( zap -> iax ) ---> ( iax -> whatever ) --> called client server often the called can't hear the caller (both machines on public ip) 'iax2 show netstats" on client machine shows more and more dropped packets on the

Two asterisk boxes 150 miles apart, both cvs-head as of this morning (and since Sept 27th), connected via iax2 with low-utilized ds3 internet, C7960 calls exten on remote system (also C7960), and call goes to VM. No other calls in either system (eg, no load). Both boxes have iax config'ed as: trunk=yes allow=ilbc jitterbuffer=yes Recorded VM messages are very distorted. Changing only

I'm having a problem with intersite calls over IAX2 being abruptly terminated. Nothing odd shows in any of the logs for Asterisk or the host. The only think I can think it might be is a lag-spike on the site to site connection. How sensitive is IAX2 to lost frames, lag spikes or large variations in jitter with the GSM codec and: bandwidth=low jitterbuffer=no trunkfreq=100 ; Raised from

Hi, I have just discovered (a year after it was implemented) a possibly undocumented incompatability between IAX in Asterisk 1.4 and any version of Asterisk pre-March 2008. It seems an AST_CONTROL_SRCUPDATE frame type was added (in March '08), but no mechanism to negotiate whether it can be sent to the remote end, so if a "new" IAX endpoint sends it, and the remote end ignores it,

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> </head> <body bgcolor="#ffffff" text="#000000"> <div class="moz-text-flowed" style="font-family: -moz-fixed; font-size: 13px;" lang="x-western">Hi, <br> <br> I try to find a solution for this problem : <br>

Asterisk 1.2.7 Redhat 9 I have DiDs from two different ITSP both set up as IAX2. Each one works when it's the only one in my iax.conf, but when I have them both defined in iax.conf at the same time, only one will work. My iax.conf is provided below. Any ideas how to fix? I'd like to use both DiDs! Thanks, H My iax.conf is below. When I dial the DiD provided by ITSP_B, the other

Hello all, What my app does is accepts a call in on a Dial-In Number (DID) via IAX, and then prompts the caller for the top secret password (123) and then authenticates the user and prompts them to dial in the number they'd like to call. Once they press pound after dialing in the number it will read it back to them, if they press pound it will attempt to connect via the second IAX provider,

When I try to call iaxtel it goes to codec ADPCM even though I have define in iax.conf gsm Call accepted by 69.73.19.178 (format ADPCM) -- Format for call is ADPCM My settings: [general] port=4569 register => xxxx:xxxx@iaxtel.com bandwidth=high jitterbuffer=no tos=lowdelay [voipjet] type=peer host= xxx.xxx.xxx.xx secret= xxx auth=md5 notransfer=yes context=incoming disallow=all ;

In my IAX config file I have: [general] bindport = 4569 ; Port to bind to (IAX is 4569) bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) delayreject=yes disallow=all allow=ulaw allow=gsm jitterbuffer=yes forcejitterbuffer=yes mailboxdetail=yes dropcount=3 minexcessbuffer=80 jittershrinkrate=1 notransfer=yes allanrobertson- 209.23.224.97 (D) 255.255.255.255

Hi, I have a question about jitterbuffer and PLC. I use Asterisk 1.6.2.0 and 1.6.0.20 or older. I use uLaw. My system map: ============================================================================= [ asterisk 2 ] -- # LOSS # -- # A # -- [ asterisk 1 ] -- # B # -- [ X-lite ] ============================================================================= I use two asterisk server.

Hello List, I've spent the last day trying to find information on how to call multiple sip phones and have them all answer so I page everbody. When I use Dial( ext&ext&ext... ) the first phone that answers gets the page, but none of the others do. Is there a way to get around this? TIA, Steve

I'm trying to get two * boxes to talk.... no matter what variation I try I get No Authority Found and connection refused from 192.168.1.5 I've googled, I've site searched.... to no avail. Here is the server a configs (192.168.1.5): iax.conf [general] port=5036 bandwidth=low disallow=all allow=gsm jitterbuffer=yes tos=lowdelay register => pbx:test@192.168.2.2 [pbx] type=peer

Hello! I have a number of IAX clients behind a NAT (on the same LAN) and asterisk server on the Internet. And that clients doesn't speak directly to each other, traffic goes through the asterisk server. What should I configure to make IAX clients on the same LAN to speak directly, please? notraster=no is set in iax.conf The asterisk server is on real IP behind a NAT (at DMZ with full 1-to-1