similar to: Help in setting up MGCP from asterisk@home

Hi folks I seted up the asterisk with an active ISDN B1 AVM Card (german vendor) and it works fine, various SIP clients (IP fon snom, xlite under MacOSX) and also incoming and outgoing connectins. Ok. No problem. After that I configured a CP7940G with a MGCP IOS. It's connected to the asterisk too via switch. No NAT deivce between. And of course, I can call out to PSTN and also to one of the

Hey guys, can you shead some light on this? I will copy my mgcp.conf and post below, but here is the problem. I can't get call waiting to work with my MGCP device. I already have one call going, and I can hear the second call come in, I flash over to it, but all I get is a dial tone, * puts the 1st call on mute/hold, but I never get the second, and it terminates. I flash back over and pick

Good Morning, I'm having an issue with callerid display when calles are placed _from_ an mgcp device (8x8 ata w/mgcp firmware). Internally, there are several different sip devices and one mgcp device. Calls from any of the sip devices to any other device (sip or mgcp) have name/number displayed properly by the called party's phone. Calls from the mgcp device to any other device display

I am running AGI script written in C. My script gets triggered but there is no action. I have taken the samplec file from http://home.cogeco.ca/~camstuff/agi.html. it says launched AGI script /var/lib/asterisk/agi-bin/sample.c exec format error . Did I miss anything? I am running asterisk1.0.7 can anyone please help me on these. thanks, Somesh -------------- next part -------------- An HTML

I have read over the archives and am still a little confused about mgcp support in asterisk. I realize the mgcp channel is server side only (but jump in and correct me if I got this wrong.) I have seen a few references to sip<>mgcp interteroperability in patches, so now I am wondering what the case is with support in the code. What I actually want to do is have asterisk act as the client

Hello, I've got strange problems trying to run asterisk with MGCP ip phones (Thomson ST2030). Situation: "user A" <----- pstn -------> ASTERISK <----- mgcp ------> "user B" "User A", connected behind a PSTN, tries to call "User B". After dialing "User B"'s number, call comes to ASTERISK, ASTERISK contacts

Hi * users, I want to know if STUN suport is available with Asterisk. Kindly let me know. I have posted this also in DEV list but none replied to me. thanks, Somesh -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050808/e26855c9/attachment.htm

Hi, in following of a recent discussion I got to work on MGCP with the Cisco ATA186 again, and got it to work very nicely. However, there is a little thing with transfers I would like to get comments on: Call comes in from PSTN and goes to an ATA186 (MGCP) Call is answered and then, using flash, transferred to another extension If the extension is available, there can be an announcement and

Hello all, I'm looking for some help to try to understand why my CPE doesn't work good with Asterisk in MGCP. Here is what I want to do : - Register a TECOM AH4021 on Asterisk in MGCP with the following profile in mgcp.Conf : [general] port = 2727 bindaddr = 10.95.20.1 disallow=all allow=g729 allow=alaw 020202020202] context=mgcp host=dynamic canreinvite=no dtmfmode=rfc2833 nat=yes

Hello, My company is doing some * testing with our Class 5 softswitch and had some questions regarding ringback being provided to our PSTN users (off --> on net calling) Currently with MGCP subscribers, we know the PSTN ringing is provided by a digital PBX for example, However, it looks like with SIP, our softswitch is relying on MGCP signaling on our PSTN gateways to provide ringback

Okay, so I'm a noob. Asterisk looks very promising, so I say "thanks" and "good job" to all who contribute. My * test box is up and running with soft phones using IAX and SIP, so now I'm on to testing hard phones. I borrowed a couple ShoreTel 210 phones from somebody who had them on hand but they only support MGCP. I see that there's an mgcp.conf in

Hello I have a problem with my MGCP voice gateway. I use D-Link DG104S Boot PROM Version 3.0B38-D Firmware Version 3.0T86-D I tried asterisk v 0.7.2 and I am using latest CVS version now. When I dial a number very fast, or when I use a redial function, my asterisk receives coupled digits. My co-worker called number 245005111, these are a few lines of my debug. The identifier of first digit

Hello everyone - first time poster, long time lurker. (sounds like a radio morning program, I know). I'm attempting to get my InterTel Axxess (w/v9.0 software) to play nice with my Asterisk implementation. Asterisk 1.2.6 is running on a Fedora Core 4 x86 box. I've tried getting the Axxess to talk SIP to Asterisk, but InterTel's SIP implementation is, well-let's say, incomplete.

> Hello all, > Can someone help me on the problem which I have on MGCP phone test . I test mgcp - asterisk- zap. But I got several NOTICE message from rtp.c. > NOTICE[20501]: File rtp.c, Line 221 (process_rfc3389): RFC3389 support > incomplete. Turn off on client if possible > > -- Endpoint 'aaln/1@VG101-1-1' observed '9' > NOTICE[20501]: File rtp.c,

Hello folks, I'm trying to get an 8x8 DTA-310 running mgcp to work. I get no dialtone & can't get it to ring. My mgcp.conf says: ; ; MGCP Configuration for Asterisk ; [general] port = 2427 bindaddr = 0.0.0.0 [172.16.2.25] host = 172.16.2.25 context = default line => aaln/1 And here's the interesting bits of extensions.conf: [globals] ... TRUNK=H323/BYEXTENSION@pstn_gw ...

I repost a message I put a week ago: I have a Cisco IAD 2431 which has MGCP protocol; I cannot make it to work againts Asterisk; at least there is some MGCP conversation between them but when I offhook a phone attached to IAD I get no tone at all. As anybody managed to get working Asterisk against an MGCP Cisco gateway ? Which MGCP version should I use ? Also I recently

FYI, Follow the Quick Start Guide from Carrier Access to setup the CMG (Customer Media Gateway) Router card. Follow the Asterisk mgcp.conf wiki page setup. The only issue I had was with the CAC CMG card, it defaults to strict policy message exchange and dial-tone will not come across when you go off-hook on a FXS port. To resolve this, get back into the CAC CMG configuration, goto: -profile

Hi! I have strange problem, I hope it's just a configuration problem, but maybe not. I'm trying to make a call between a MGCP gateway and Cisco 5300 talking SIP. Everything is fine except that audio is one way (from 5300 to MGCP gateway only). It seems that during reinvite Cisco gets confused by session ID and version and excpects RTP stream on different port. The call flow on SDP

Hi List I have one question about MGCP in asterisk. I have a media gateway, and I want to have asterisk to work with the media gateway. As I was told that the media gateway can communicate with the switch via standard interface MGCP/ICGP. Question is if the asterisk MGCP supports such MGCP message ??? Thanks. George Lin

It looks like Asterisk's mgcp, defaults as "connect to" endpoints or gateways. Is there a means to have it act as the endpoint or gateway? I have another system that needs to "connect to" a mgcp endpoint and I would like that to be asterisk. Thanks! Philip Kubat