similar to: Asterisk/Hylafax <=> Receive/Send faxes

Hi! from 2 days I'm trying to run hylafax server and iaxmodem with Asterisk 1.8.5. I have 2 computers in the lan, one is the Asterisk PBX and the other is the server with hylafax and iaxmodem installed. In Asterisk I set up an IAX trunk in this way: ___________________________ iax.conf [iaxmodem] type=friend context=outgoing-fax disallow=all allow=ulaw username=iaxmodem secret=password

We run the distro HylaFax on a CentOS-5.4 host. On infrequent occasions we notice that the server will not pick up an incoming call. It reports listening to modem rings. Now, it seems to me that picking up the call should be under the control of the modem but I notice that there exists a setting in Hylafax for the number of rings before picking up. The default value for this is 0 (zero) but we

I'm running into a strange issue with Asterisk + Iaxmodem + hylafax on the same machine. After rebooting the iaxmodems don't register to asterisk. Stoping and starting the relevant services gets it working, but what is the point of using init scripts if it does not work right? I already tried to adjust the init scripts in /etc/rc3.d so I have: S50asterisk s90iaxmodem S95hylafax So it

Hi, Can you give me some councils of remotely rebooting sip phones in asterisk server? How to configure sip_notify.conf and sip.conf? Kind regards, Guan ; Reboot Polycom Phone Event=>check-sync Content-Length=>0 ; Untested (Reboot Sipura Phone) Event=>resync Content-Length=>0 ; Untested (Reboot GrandStream Phone) Event=>sys-control ; Untested (Reboot Cisco Phone)

Hi all, again I try configure Hylafax with asterisk. I would like configure Asterisk in the next way: 1)An incoming fax go into through X100P 2)Asterisk detects Fax and redirect fax to Hylafax Is it possible? Any idea woluld be great idea? regards, srsergio -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.296 / Virus Database:

Hi, I have a question: In my company a have a 100% IP Telephony implemented (Cisco Phones, Routers, Switches, etc). We are connected to our operator by two E1 lines. The PBX is on operator side (a H.323 Gateway is configured on call manager). I study the possibility to implement a Hylafax server. In some sites I read that with the IAXmodem is possible to have virtual modems, with don't so

Can anybody point me in the right direction please? I'm having some issues getting iaxmodem and hylafax to talk to each other. I have no doubt that someone has had this type of issue before but I can't find anything useful in the archives or on Google. Under RH9, with chan_capi 7.1, Asterisk 1.2.24, with an AVI Fritz ISDN2e BRI card all working perfectly... I've downloaded and

I just installed Hylafax with Iaxmodem and I am not getting good results when receiving faxes. I can see that the modem is reporting the following: Mar 31 16:19:08 pbxoficina FaxGetty[5377]: MODEM Supports 2400 bit/s Mar 31 16:19:08 pbxoficina FaxGetty[5377]: MODEM Supports 4800 bit/s Mar 31 16:19:08 pbxoficina FaxGetty[5377]: MODEM Supports 7200 bit/s Mar 31 16:19:08 pbxoficina FaxGetty[5377]:

I think I'm very close to getting IAXModem and Hylafax going, but my current inbound hylafax logs show this: Feb 23 10:09:37.98: [ 3638]: MODEM <Empty line> Feb 23 10:09:37.98: [ 3638]: MODEM TIMEOUT: waiting for v.21 carrier Two questions - 1) Does anyone know what step I missed here? (I.e. please help!) 2) Is there a document I should be working off of? Google doesn't seem to

Hi, I would like to set up a high density FAX/PBX server, am looking at using Eicon Diva E1 card with Asterisk and Hylafax sharing channels, is this possible. I know Extensions can be reserved for voice OR fax with the combination of chan_capi used for * voice, capi4hylafax on fax but then channels must be dedicated rather than shared ie. would like to be able to answer voice/fax on same DID.

hi list , is having problems when sending a fax with hylafax and a card sangoma A200D, when he sends it arrives to the destination but it paginates appears in white this is my log Aug 20 16:11:08 voz FaxSend[6715]: MODEM Supports 40 ms, 20 ms/scanline Aug 20 16:11:08 voz FaxSend[6715]: MODEM Supports 40 ms/scanline Aug 20 16:11:08 voz FaxSend[6715]: MODEM WWW.SOFT-SWITCH.ORG spandsp/ Aug 20

We run a CentOS-5 based hylafax server with external serial modems. We are transitioning to an Asterisk system using IAXmodem running on CentOS-6. On the CentOS-5 system to start the fax modems we added these lines to inittab: # Add fax lines and always ALWAYS run "telinit q" after making a change. fax1:2345:respawn:/usr/sbin/faxgetty ttyS0 fax2:2345:respawn:/usr/sbin/faxgetty ttyS1

faxguy, maybe you can tell me why As I've noted in previous posts I'm evaluating HylaFax with IAXModem. When I run iaxmodem and faxgetty through a console the modem works 100% I have yet to find a fax that it won't tie up with. When I run IAXmodem and faxgetty in initttab, the modem is extremely slow to respond and only actually does anything about half the time, the rest of the time

I have all three running on the same box. I say OT because it appears asterisk is doing it's job just fine. It must be an IAXmodem or faxgetty (hylafax) problem When faxes work, they look great. I have ten IAXmodems setup with different ports and they register fine. I have ten faxgettys that startup fine. I start the IAXmodems and then faxgettys in inittab. They are setup as a roll

I'm trying to find a voip-suitable USB headset (I.E. headphones + microphone) which I can use with my laptop while I'm traveling and using Firefly or another softphone. I'm currently using a Logitech headset which works well (except the echo it generates toward the other caller when I turn up the gains too high), but it just doesn't carry well - in fact, I can't carry it in my

Hello, I can?t compile "iaxclient", because one needs to compile the new version "wiax.dll". I tried to compile it under MinGW/Cygwin, but I had the messages like: cc -I. -Igsm/inc -Iportaudio/pa_common -Iportaudio/pablio -Iportmixer/px_common -Ilibspeex/include -g -O2 -DSPEEX_PREPROCESS=1 -DNEWJB -Ilibiax2/src -IAXC_IAX -DLIBIAX -DSPEEX_EC=1 -DWIN32 -DBUILDING_DLL -c

Hi, I'm trying to receive faxes using hylafax / iaxmodem but I just can't get it to work. We're using Sangoma E1 cards and have calls coming in over PSTN. I've tried turning hardware echo cancellation off but it makes no difference. This is what I get in /var/spool/hylafax/log: [root at faxhost log]# cat c000000003 Jan 14 12:44:43.39: [ 3403]: SESSION BEGIN 000000003 18005551212

Hi all!, i search for some information about to setup my asterisk box with e-mail notification when a I call the voicemail application. Voicemail application works fine in the Dial Plan but nothing happens with email notification ...so what i need to know about this?...wiki pages did not help me ....thanks! G. ----- Original Message ----- From: <asterisk-users-request@lists.digium.com>

Hello. We are running Asterisk 1.2.23 iaxmodem-0.2.1 and hylafax-4.3.3 When we send faxes the people who receive the faxes complain that they look wrinkled or smashed up. Sometimes they are missing random lines. Has anyone seen this happen, or know how to fix it?

Hey everybody, I wanted to know what other may be doing to stem the flood of inbound junk faxes? We currently using Asterisk/iaxmodem/Hylafax for fax services and get a number of junk faxes daily. Most (If not all) of them have caller-id blocked and have a TSI of "". I was hoping that, since we are using a PRI, there would be other information coming across that I could use to