similar to: [Aserisk-Users]no audio inside the net

hi do u have the sip phones extensions in the extension.conf and are they in the right context (sip-incoming)??? are the sip phone registering to asterisk?? try stop asterisk and reconnect as asterisk -vvvvvvvc to check see them registering... ________________________________ From: asterisk-users-bounces@lists.digium.com on behalf of Sistemista WebSolvingJaa Sent: Fri 7/1/2005 6:43 PM

Hi everyone! I'm quite a newbie at this Asterisk stuff so please bear with me. We've recently decided to start training in Asterisk via AsteriskNow! Asterisk version is 1.4.18.1 through AsteriskNow! 1.02 The box we have is paired with a Digium TE110P and we've managed to get it to the point where incoming calls via a single DID (from NTT Japan) can be received and answered

My phone still says Not-Registered. I have a Polycom SoundPoint 600 SIP phone. Here is my sip.conf file: ; ; SIP Configuration ; [general] context=default ; Default context for incoming calls port=5060 ;added bindport=5060 ; UDP Port to bind to (SIP standard port is 5060) bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) srvlookup=yes ;

Thanks to help on this list and Sangoma's support we have incoming and outgoing calls passing through asterisk. However both incoming and outgoing calls are greeted by silence. I've noted our existing config below with our test extensions.conf. Help much appreciated Rory Zaptel ----------------------------------------------------------------------- loadzone=uk defaultzone=uk #Sangoma

Now that I actually try and google for it, I can't find any dual mode GSM/DECT handsets, only pages telling me that they exist without any actual information!!! Does anyone know of any such handsets? (and even better, ones that are available in Australia) I've searched a few of the major gsm manufacturers (nokia, Panasonic, sonyericsson) but their web sites are absolutely pathetic to the

Dear Users ! I have recently installed asterisk 1.4 i got a warning message whenever i use reload or extensions reload. [Jun 29 19:22:11] WARNING[4539]: pbx.c:6236 ast_context_verify_includes: Context 'ael-local' tries includes nonexistent context 'ael-parkedcalls' [Jun 29 19:22:11] WARNING[4539]: pbx.c:6236 ast_context_verify_includes: Context 'ael-dundi-e164-local'

Here's a possible bug, or more likely, I'm just missing something. We have a pots card in one of our asterisk boxes. Its a simple asterisk setup with one FXO/FXS card and basic static extensions file, etc. When we dial out over the pots line, 4 out of 5 times, it will work. However, every 4 or 5 times, we get an error back from the provider that says "The number you have dialed.....

You are reading the instructions for the STABLE 1.0 version of asterisk and are using the CVS version. Goto the wiki and read the instructions for RealTime. -Matthew ----- Original Message ----- From: "Muhammad Rizwan Khan" <rizwan@advcomm.net> To: <Asterisk-Dev@lists.digium.com> Sent: Wednesday, January 05, 2005 12:42 PM Subject: [Asterisk-Dev] Asterisk with MySQL >

Hello, i'm using asterisk 1.4.9 in fedora 7, i was compiled its with this package: libpri-1.4.2 asterisk-1.4.9 spandsp-0.0.4 unicall-0.0.5pre1 libmfcr2-0.0.3 libsupertone-0.0.2 libunicall-0.0.3 zaptel-1.4.4 i'm using a E1 pci card with R2 but they not work, when I start the asterisk its generate this log: [May 12 08:53:24] WARNING[30814] channel.c: No channel type

Hi peeps, I've been struggling with DUNDi for a few days now and I can't seem to make call from Asterisk A to Asterisk B. If I do a "dundi show peers", it finds the other peer but I can't seem to make any calls. Can anybody help me out here. Here's the situation: Machine 1: Debian with Asterisk 1.4.4 --> 192.168.1.103 Machine 2: AsteriskNOW --> 192.168.1.69 The

> Questions: > > 1. Is the wiki DUNDi example and the dundi.conf file too difficult to > follow for new users? > I wouldn't exactly say that it is too difficult but that the target audience for the default examples is not the average person/entity that could make use of the power inherent with DUNDi. When an average * user/admin wants to use DUNDi they will want to start out

Apologies if this is a repeat: I trawled through the archives and couldn't find a reasonable answer, so I'm asking here. I have an Asterisk install connecting from behind a NAT device (DSL modem) to a SIP proxy (in my case, Broadvoice). I have an sjphone softphone on a Windows PC also behind the NAT device that connects to the Asterisk install, and using this setup I've been pretty

Hi All, I have a really strange issue occuring where if I run "show dialplan" or "dialplan show" or "dialplan show parkedcalls", then asterisk dumps core. It only appears to happen with contexts that are created within res_features. I am able to display all my other dialplans, but, every time I try to just do a normal "dialplan show" asterisk core dumps

Hi, i'm having asterisk with sip working fine, including dundi lookups. The only problem i'm having is that the dundi answer allways contains my internal, private ip. Is there any way to set the targeting ip that is sent out in the dundi answer (to my public ip or any other where i want to receive the call)? Regards, Andreas.

Hi List, Would someone can to explain me the main difference in SWITCHES or ESWITCHES in AEL. context default { switches { DUNDi/e164; IAX2/box5; }; eswitches { IAX2/context@${CURSERVER}; }; }; All the best, Thiago -- ---------------------------------------------------------------- Thiago Maluf Resende Tel: +55 21 9700-9113 e-mail: malufrj at

Greetings list, I've been using DUNDi for some time now to prevent calls between users going out via PSTN if there's no need, set up as follows: [macro-dundi-e164] exten => s,1,Goto(${ARG1},1) include => dundi-e164 [dundi-e164] include => in-e164 switch => DUNDi/e164 My outbound call macro tries [macro-dundi-e164] first, if that fails then goes onto PSTN connectivity.

I have searched and searched for over a week on this but can't seem to find the issue. Calls from CallManager to Asterisk are being disconnected immediately. I have setup CallManager and Asterisk per Shaun Ewing's pdf http://asterisk.edropbox.net/ccmasteriskvm.pdf I have installed Asterisk 1.4.0-beta3 on Fedora Core 5. I got libpri, zaptel, and asterisk compiled and installed.

Questions: 1. Is the wiki DUNDi example and the dundi.conf file too difficult to follow for new users? 2. Does the complexity of the DUNDi setup discourage you from using it or even attempting to configure it? 3. If there was a simple tutorial, step by step guide with easy to setup and test examples, would this encourage more users to investigate and use DUNDi? I'm interested in putting

I'm using DUNDi. My lookup returns 'IAX2' for the tech, and 'dundi:q9sgTFkVMBFdmp0IDX1bYQ@xxx.187.142.204/3254101' for the destination. How do I dial this? I've tried dialling it with: "Dial" "IAX2/dundi:q9sgTFkVMBFdmp0IDX1bYQ@xxx.187.142.204/3254101" passed from my AGI script, but the other endpoint (xxx.187.142.204) is returning: May 11 09:23:41

How do I make a user dial a passcode if he wants to make an international call? ________________________________ This electronic message contains information from BOSH Global Services which may be company sensitive, proprietary, privileged or otherwise protected from disclosure. The information is intended to be used solely by the recipient(s) named above. If you are not an intended recipient,