similar to: WG: Cisco 7920 WLAN Phone

Hi, everybody. I was just running into a DynDNS Problem. One of our phones has a fixed IP, but the * box only has a dynDNS IP and a fixed name. So all phones running SIP are able to "survive" the change of the IP address, but not our Cisco 7920 - it changes state to "connecting to CM0" and hangs there until reboot. After reboot it looks up the current IP address of the * box

Hi, I am trying to install asterisk 1.0.7 on a VIA EPIA 5000 board - anyone of you already managed to do so? I got V1.0.6 running, but 1.0.7 seems not to compile. I don?t want to bother you all with output code of the errors I get when I try to compile asterisk; I am just curious if anyone of you made it! Thanks for a quick reply! Sincerely, Armin Lediger

The chan_sccp page at http://www.voip-info.org/tiki-index.php?page=chan_sccp2 has been updated. See the bottom of the page. Thanks. Comments welcome. -- respectfully, Joseph =============== ---------------------= ********** =

Greetings, I have seen a few postings in the past regarding the interop of Asterisk and the Cisco 7920 WiFi phone. To date, I have not seen a definitive method to getting the phone working. Assuming someone has this actually working, can that person step up and answer these questions. 1) What Channel is it working with (chan_skinny or chan_sccp)? 2) If code was used that is not a part of a

Hi All, have some decent success on the 7920 "activation" in Asterisk. Latest status: chan_skinny does NOT work with 7920 chan_sccp does WORK with 7920 (!!) however: to remove coredumping the chan_sccp just comment out the MWI (messagewaitingindicator), then it compiles fine. Then change sccp_helper.c: return "P0060302" instead of the old value. and voila: Phone is

hi! i had some good news regarding the cisco 7920 and the internetworking with asterisk (and possibly SIP ?). Status: chan_sccp.so not coredumping anymore :-) Phone contantly in reboot loop [see below] :-( Reboot Loop means: ------------------ Phone auth's with AP Phone gets IP from DHCP & TFTP Server Phone loads OS7920.TXT Phone loads SEP<macaddr>.CNF.XML Phone loads

I have asterisk 1.09 running with chan_sccp.20050701 on Fedora core 4 with kernel 2.6.12. I have a Cisco 7940 working with X-lite working on XP too, connecting to each other, Asterisk and FWD. The 7940 upgraded to SIP7.4 with xmlDefault.cnf.XML getting delivered via tftp using the loadInformation8 parameter method taken from voip-info.org ("Configuring Cisco 79xx phones with Asterisk"

Hi Siggi, > > 7960 and then "Call Ended" on the Display (curious about that !!!). > > That seems to be normal for the 7920. I've sniffed the registration > procedure with Cisco's newest 3.3(3) CallManager (+patches), and it's > doing the same thing. Maybe that's some odd way of testing if the > CallManager ("CCM") really works... >

Hi, I have a Cisco 7920 that I'm trying to get working with my * box. When the phone boots it requests XMLDefault.cnf.xml and SEP<MACADDRESSHERE>.cnf. I assume I set the line number, etc in the latter of the two. However I cannot find any reference to how this file is structured. Anyone know? I assume this is why I'm getting the errors below: Oct 17 19:47:24

I?ve read various stories about the Asterisk SCCP implementation. Some say it works fine, others say it doesn?t ? stick with a SIP phone! My dilemma is that I?d like a WI-FI phone with multi-line capability, and so far Ciscos 7920 is the only one I?ve found. The disadvantage is that it cannot be upgraded to support the SIP-protocol, so if I purchase such a phone I am stuck with the SCCP.

Hi again, I found chan_skinny and that seems to work pretty good. the SCCP one filled out all the buttons really nice, but skinny seems to be working. How do I fill out the second line button on the phone with skinny.conf? Thanks much! ...Jeff

Hi all, we are happy to announce the new test-release of chan_sccp. The Cisco 7920 support is working now, however, some call handling stuff is hardcoded for testing. Also some more in-deep-knowledge of Skinny was archieved, how they handle calls. Please test it with your 7940/7960 and 30VIP and report any problems using our bug tracking tool. The latest tarball is available at:

Hi, I have one Cisco IP Conference 7935. Somebudy have any idea how I can config this phone to work woth "*". My "*" server is now working with GrandStream Phone and X-Lite SoftPhone, I need to add this Cisco 7935 but I don't know how I can convert to SIP. Thanks, Pedro Mansilla Consulting Integrating Services pmansilla@cis-international.com T:

Greetings: I have a working configuration for SCCP on our LANS which doesn't route RTP correctly to a skinny phone behind NAT registering from a remote public IP. Configuration: asterisk 1.4.35 servicing only skinny phones trunked to asterisk 1.2.40 which services chan_phone FXS, zap FXO and SIP phones; both instances of asterisk are behind NAT and run on the same host (using different base

Interesting notes on the 79xx series. The 7920 is the wireless phone; not mentioned here. For a more complete guide to Cisco's phones, see: http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheets_list.html The 7902 is the "very inexpensive" Cisco phone, and it looks like it will be SCCP (Skinny) only. Twiddling my thumbs here waiting for the chan_sccp to

Hello, I found serveral discussions about the Zyxel ePhone Prestige P2000W and the WiSip from Pulver Innovations on this mailings list but still have some questions: 1) are there other affordable wireless SIP Phones on the market? I haven't seen or found anything else till now ... 2) is p2000w and wisip the same hardware?? so could I use firmware from both companies regardless of what

http://chan-sccp.berlios.de/ 20050713 ftp://ftp.berlios.de/pub/chan-sccp/chan_sccp-20050713.tar.bz2 I didn't have a spare 7960 to use this week, so maybe some line issue is still present. - fixed a memory leak on database updates (dnd, cfwd*) - fixed old memory leak on unload (now unload chan_sccp.so and load chan_sccp.so work. It does reload the config when asterisk is running) - socket

Martin: I had seen your other post and sent you a message off-list, but I never got a response. What do you feel is the most lacking that does not make it ready for a production enviroment. - I've been using a SIP deskphone in my office and usually some sort of ATA at my house, both as the primary phone. I've also had mobile phones from almost every carrier. Each one of these devices

Hi list! I'm trying to configure the Kirk IP 600 wireless (DECT) system. The wireless phones are regular DECT phones, the Kirk IP 600 is doing the voip part by registering/gatewaying the phones to a callmanager server. The phones do not work and I think the problem is that they do not register at asterisk but I'm not sure because I don't understand a thing of the sccp/skinny

Hi, please tell me, is original skinny support in Asterisk stil under development or is better to try chan_sccp from http://chan-sccp.sourceforge.net ? my first try was unsuccessfull (chan_sccp compile OK, but module loading fail during Asterisk startup) and my phone (C7940) seems to be not supported in original chan_skinny :( PJ