similar to: PSTN to SIP gateway

Hello, We have 4 'Onramp-2' Telstra ISDN BRI services operating on Asterisk Server with Eicon 4BRI card. For most part the service is okay. However, we are are having problems with passing callerID to internal extensions. This is the set of command executed. exten => <pattern>,1,Answer ; Answer the line exten => <pattern>,2,NoOp(${DNIS}) ; debug statements exten =>

Hi i have an asterisk pbx with E1 port connected to another PBX. Im trying to send the DNID/DNIS to the PBX here's my dialplan exten => 8881111111,1,Dial(ZAP/g2) exten => 8881111111,n,Hangup() The PBX just get the number 2 as it's DNIS when i change it to ZAP/1 or ZAP/g1 the PBX get the number 1. What should i add to send the extension number as DNID/DNIS? Thanks! --------------

Question: Naturally there are times when need to I reformat an extension in a context as such: ;Reformat add CC1 exten => _NXXNXXXXXX,1,Goto(1${EXTEN},1) -or- ;Reformat 011 with with +CC exten => _011X. ,1,Goto(+${EXTEN:3},1) It's a helpful trick, BUT there are times when I want to send the call to another context in its original un-reformatted state. Naturally the ${EXTEN}

Hello list. My phone rings, I pick up, and the conversation is terminated. Every time. The setup : Grandstream GXP2010 --> SIPproxy (Endian Firewall) --> Asterisk Server --> ITSP Could it be the SIP proxy of my Endian firewall ?? I have 4 accounts on the Grandstream which listen on port 5060 --> 5063. They have a proxy defined namely my Endian firewall. On this SIPproxy I have a

We're passing PSTN traffic on to a SIP proxy. The SIP phone customers have voicemail that will answer if their phone isn't picked up in a certain amount of time. However, if their phone is not on the network, a caller will get nothing but dead air as Asterisk keeps attempting to initiate the SIP connection. Is there a way to generate a ringtone for the caller while Asterisk is trying to

> Post your extensions.conf and what's on the CLI (asterisk -r) As requested: # cat /etc/asterisk/extensions.conf [incoming] exten => s,1,Answer() exten => s,n,NoOp(CallerID is ${CALLERID}) exten => s,n,NoOp(DID is ${DNID}) exten => s,n,Background(enter-ext-of-person) exten => 1625,1,Playback(digits/1) exten => 1625,n,Goto(digits/1) exten => i,1,NoOp(CallerID is

Hi, ALL: When I use astcc to do the prepaid function, but if I want to enable "call forward". The result of CDR seems not correct. UA 1011 make a call to UA 9999, and UA 9999 forwards this call to a PSTN number. I think we shall charge the credit from UA 9999 not UA 1011 because UA 1011 don't know where UA 9999 forwards to. But in CDR, I can only find the from(1011) and

I haven't been able to find much support for the RDNIS or DNID variables online. I am trying to prove a concept of call routing before we move towards development of a production system. I need to have calls routed coming into a call center based on DNIS. What type of syntax is needed in the extensions.conf file and how can I test it with a softphone (ie: can I emulate the DNIS from xlite)?

Hi all, In order to use the "open url" function of zoiper (it opens an url based on the asterisk $callerid(dnid)), I need rewriting of the dnid. In my dialplan I have: exten => 1000,3,Set(CALLERID(dnid)=newdnid) exten => 1000,4,Noop(${CALLERID(dnid)}) exten => 1000,5,Queue(test-queue) but the callerid(dnid) shows the extension called (the member of the test-queue) and not

Hello, I am using OpenSIPS to register all the users and planning to use asterisk for Auto Attendant, Queues, Voicemail and Conference Bridge. I have a scenario where the signaling does not happen properly: 1) A user from Opensips dials an extension 7000 which is an auto-attendant extension. The call is routed to asterisk to play the auto attendant messages like Welcome and Dial the

Hi. I've discovered a bug in the Dial() string processing (for Asterisk 13.14.1 at least). According to the documentation in channels/chan_sip.c the Dial() string syntax is: * SIP/devicename * or SIP/username at domain (SIP uri) * or SIP/username[:password[:md5secret[:authname[:transport]]]]@host[:port] * or SIP/devicename/extension * or SIP/devicename/extension/IPorHost * or

Greetings! I'm using Dovecot and Postfix with virtual mailboxes, the mailbox data is contained in a MySQL database. I'd like to use the Dovecot delivery agent so I can support Sieve filters. However, I'm not sure how to get the delivery agent to work with the Dovecot auth mechanism and MySQL to do proper lookups of email addresses with address extensions (such as test-blah at

I have several toll free numbers that get forwarded to a single local number assigned to a trunkgroup. I've asked the telco to not forward those toll free numbers but to assign them as DIDs to the trunkgroup, so that I can differentiate via DNID. They said that they can't do that. That toll free numbers must forward. I know that I could have them each forward to different local DIDs

Hi, I'm using videocalling on asterisk 1.4.10. When I setup the videocall with exten = n,1,h324m_gw(s at video2webanswer), I loose the variable DNID (${CALLERID(dnid)}) Before the videocall is set up, this variable is filled and after this videocall this variable is empty. Also all local variables are empty. If al look at the A-number (${CALLERID(num)} this variable is not empty

Hi, We encounter a problem with the variable CALLERID(dnid) We use E1 lines where we can make an inbound call or an outbound call on the same channel (not at the same time) If the CALLERID(dnid) is not used, than the CALLERID(dnid) will be the CALLERID(dnid) of the previous call For example: - First we get a inbound call on channel DAHDI/11-1 with CALLERID(dnid) = '655871460' We read

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type"> </head> <body bgcolor="#ffffff" text="#000000"> Up until today, I have had no issues with receiving faxes in *. One change I made was that I now have the incoming

I have to register asterisk/sip with a sipproxy that does not support authentication, I do not know how to tell Asterisk not to send authentication request? # sip.conf [general] insecure=very permit=207.148.115.10/255.255.255.0 [myproxy] type=friend host=217.118.115.10 context=from-sip # Logging: <--- Reliably Transmitting (NAT) to 207.148.115.10:5060 ---> SIP/2.0 407 Proxy

at least 4 me. Anyone knows what are the variables in an inbound IAX2 call who reflect the actual codec and DNID, DNIS, original peer description, I'm only able to see it during an iax debug Timestamp: 00003ms SCall: 00001 DCall: 00000 [66.98.146.34:5036] VERSION : 2 CALLED NUMBER : 911214686 CALLING NUMBER : asterisk CALLING NAME : asterisk LANGUAGE :

> -----Original Message----- > From: Robert Webb [mailto:rwebb@ropeguru.com] > Sent: Saturday, March 05, 2005 5:24 PM > To: 'Asterisk Users Mailing List - Non-Commercial > Discussion'; 'leandro_tenorio' > Subject: RE: [Asterisk-Users] IAX2 (Variables) > > > > > -----Original Message----- > > From: asterisk-users-bounces@lists.digium.com

Dear Asterisk-Users: Question: ======== How do I get asterisk to pass DNID/RDNIS information between asterisk machines using iax2, in a Dial(IAX2...) command ? Setup: ===== I have two asterisk boxes, MASTER and SLAVE. MASTER is running 1.2.0 and SLAVE is running 1.2.1. The main box handles incoming calls on a multiple lines (both via hardware connection to our internal PBX and calls