similar to: Zap channel billing on busy tone!

I'm trying to call from XLite phone to PSTN (I've tried this from internet and from local network the same) The Xlite doesn't write that it is connected but receives excelent audio. At the other end comes only noise. Some times only for a second you can here the caller voice , but this was only one time :) I saw with ethereal that UDP packets are coming and going to the asterisk

Hi, I'm having problems using a TDM400P Card. I put my SIM card in a Nokia Premicell and connected it to a TDM400P card but when I make calls to the number, it hangs up automatically. The card also can't call out. Any ideas? I've searched the archives without much success. I appreciate all your help. Details: I'm using Asterisk 1.2.17 on Fedora Core release 5 (Bordeaux). On an

Hi, I have just put in a tdm400p with 4 fxo modules and am trying to dial out from x-lite to dial my mobile phone just to test. The output in the asterisk console is like this Executing Goto("SIP/2002-239b", "mobile|61400039953|1") in new stack -- Goto (mobile,61400039953,1) -- Executing Goto("SIP/2002-239b", "localcall|61400039953|1") in new

Hi all, I've been running Asterisk with a TDM400P for about 6months, no problems. 2 in/outgoing analog lines, one analog phone. Recently I was messing with the XTEN client, got to finagling with things, and not knowing what was wrong I upgraded from 1.0.7 to 1.0.9 (both asterisk + zaptel). I was testing various things, and found everything worked except outgoing calls. So I checked

Hi, I'm having strange warning from asterisk when I try to dial GSM Gateway: -- Executing [1011501522xxx at sm:1] NoCDR("SIP/ibm-b2c52848", "") in new stack -- Executing [1011501522xxx at gsm:2] Dial("SIP/ibm-b2c52848", "Zap/R3/501522xxx") in new stack -- Requested transfer capability: 0x00 - SPEECH [Jul 13 11:58:50] WARNING[18208]:

Using asterisk 1.4.18 and zaptel 1.4.9 on x86_64, I am having trouble dialing out to the pstn. The call is initiated at Zap/1-1 and should exit via Zap/3. I get the following: -- Starting simple switch on 'Zap/1-1' -- Executing [2111 at internal:1] Dial("Zap/1-1", "Zap/3/8801234") in new stack [Feb 25 02:36:59] DEBUG[7194]: chan_zap.c:1954 zt_call: Dialing

This was submitted to the Dev list last week, but there was no response, and perhaps it wasn't the right group. I am developing an application in which I need asterisk to pass on an incoming call to a separate IVR server. The problem is that asterisk appears to hang up while the IVR is playing back a sequence of recorded voice and systhesized voice prompts. My setup is: Analog line

Trying to compile asterisk (again) from scratch. I seem to be still experiencing the effects fro Jan 25 where I get no sip to sip audio. I have tried upgrading to 1.2.3 which has made no change in the problem. I am starting over and now trying to compile/install /trunk zaptel libpri asterisk following the instructions to grab the source trees: # svn checkout

Hi, I am a beginner in asterisk. Implementing it in my dept in India using TDM400b card with asterisk, zaptel, libpri version latest of CVS HEAD Callerid on my system is coming tough. Asterisk doesnot finishes the callerid spill and Cancells it. After going through code in Callerid.c and chan_zap.c I found that my line is providing caller id of length 8867. Flow enters in zt_call and

I am trying to help a guy out with his Atcom IP04. He has set it up like this. He has a handful of IP phones all connecting via SIP. He has two phone lines connected to the FXO ports one from telecom, another from vodaphone. He has set up the dialplan so that one of the trunks fails over to the other trunk. Everything seems to be working OK except for outgoing calls. He can call from

Dear The Expert, I am very new with this, I have installed AsteriskNow, X-Lite as my SoftPhone, I am using SPA-3102. I have 3 extensions, me at 250, 998 is my Linksys SPA-3102 and 999 for PSTN Line (see below) My problem is, I am unable to call 998, I thought this is registration problem, (because the Linksys screen info said Registration Failed) Could any body please help? Many thanks in

All, I was a bit too focused on where I thought the problem was - turns out I wasn't crazy and the dialplan does work as expected. The problem was with dtmf detection - setting relaxdtmf=yes did the trick. Sorry for the premature post for help. Begin forwarded message: > From: Ben Witso <benw@bgwcomp.com> > Date: Mon Jun 21, 2004 7:28:42 PM US/Central > To: Asterisk-Users

I'm trying to clean up some notices/warnings that are repeatedly logged in *.Any Help would be appreciated as I'm not sure of the cause /solution. Here are the errors: Nov 17 15:53:38 WARNING[1217602880]: File chan_zap.c, Line 1321 (zt_call): cidspill already exists?? +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ /* Don't send audio while on hook, until the call

Hello, i'm using a TE410P on some E1/PRI with EuroISDN and experiencing a few audio quality problems with current CVS (both zaptel and asterisk) and the following network ISDN public SIP/zaptel network ---- pri --- ASTERISK GW --- iax --- ASTERISK PBX --- PHONES w/ any codec the rx (public network to local

I can't build it, errors: chan_zap.c:61: #error "You need newer libpri" chan_zap.c: In function `zt_call': chan_zap.c:1806: warning: implicit declaration of function `pri_sr_set_redirecting' chan_zap.c: In function `pri_dchannel': chan_zap.c:7776: structure has no member named `redirectingreason' chan_zap.c:7778: structure has no member named `redirectingreason'

I recently purchased a TDM11B so I could hopefully hook flash the FXO from either the FXS (on the TDM11B) or a SIP device. From the FXS, I've tried hitting # then transferring to an extension that flashes the line then dials the FXS again (3020). This seems to send me to a busy signal and the console tells me no such host of 3020 (the number I'm on). The call on call waiting gets sent

I have put a box together using 2 X100P and 2 TDM400 4port cards. Using the simple setup that Martin posted a few days ago, I have asterisk almost up and running. /etc/zaptel.conf fxsks=1-2 fxoks=3-10 loadzone=nz defaultzone=nz (I have added NZ tone information to zaptel and Asterisk - I'll submit a patch soon). /etc/asterisk/zapata.conf [channels] context=incoming signalling=fxs_ks

I used: cvs checkout zaptel libpri asterisk asterisk-addons asterisk-sounds iaxyprov astcc and in the same order I try to compile it. Asterisk ends with the lines below. It complains of a newer libpri, but I just did it a step before! What do I miss? chan_zap.c:62:2: #error "You need newer libpri" chan_zap.c:128: error: parse error before '<<' token chan_zap.c:133:1:

Hi, maybe ist a general Problem. i have the following question. Wheni create manually a DNS record with RSAT Tools there is no problem. The following steps i try to get automatically updates. The following steps i have done. - Remove the Computer from AD - Remove DNS Record (checked also with ldbsearch for the principal, nothing found) - Join the Computer back to

Hi all RESTORATION of POWER I seem to have cabling & drivers set up correctly for a contact closure UPS ............as below the logs should indicate that. BUT .......... But after power Restoration between commencement of (shutdown -h +20) ....... & execution of (shutdown -h +20) during the 20 minute wait period of shutdown or whatever the "time" variable is.