similar to: Suddenly a problem with outgoing calls made from Cisco phones...

With asterisk 1.8.7.0 has been running ok for months. Now, this morning, it's crashing. I can restart it, but it crashes after 10+ minutes. It dies like this -- Executing [s at macro-stdexten:2] Dial("SIP/teliax-00000019", "SIP/176,18,rtT") in new stack == Using UDPTL TOS bits 184 == Using UDPTL CoS mark 5 == Using SIP RTP TOS bits 184 == Using SIP RTP

Hi everyone, I have an issue which is kind of a catch 22 situation. I had outgoing calls to my new PSTN provider working perfectly. Then I started focussing on incoming calls. It seems that I can solve an error which gets my incoming calls working but that in turns means my outgoing calls don't work. - Strange. Anyhow I was getting an error: Process_sdp: No compatible codecs! And from

We are getting the following on 1.8.3 and 1.8.4-rc2, HELP! Why is Asterisk unable to transcode to/from ulaw and g722? [2011-04-21 09:51:34] WARNING[22067]: chan_sip.c:6064 sip_write: Asked to transmit frame type ulaw, while native formats is 0x1000 (g722) read/write = 0x1000 (g722)/0x1000 (g722) [2011-04-21 09:51:34] WARNING[22067]: chan_sip.c:6064 sip_write: Asked to transmit frame type ulaw,

Hi Guys, I have a the following issue when I ma trying to place a call through my voip provider, I am using an asterisk 1.2.21.1, do you have an idea what could fix this issue (as you can see when the other party answered, the call get dropped because of probably sip incompatibility) Nov 12 14:31:30 WARNING[21432]: chan_sip.c:2587 sip_write: Asked to transmit frame type 256, while native formats

Hi list! I have 4 numbers on my Asterisk 1.8. 3 work perfectly, the 4.th not. I'm not sure, when it finish to work, since a month ago it runs without any problem... Well, if I will be called on this number I can't hear anything and in Asterisk I see these: [Jul 15 18:59:55] WARNING[8752]: channel.c:5060 ast_write: Codec mismatch on channel SIP/00493514977290-000001d1 setting write format

Hi, I have just signed up with Voxee.com and have attached my Asterisk server to dial them via IAX2. Below is the start of the log which dials the number and promply hangs up when the call is answered, with the logs saying that the channel is not compatiable. I have traced this down to the g.729 codec which I don't have installed. Any ideas on how to force that the codec not be used?

Starting with Asterisk 13.1 we are seeing this WARNING messages a lot in our logs and console: WARNING[25164][C-0004865e]: chan_sip.c:7364 sip_write: Can't send 10 type frames with SIP write) We found that line in function "sip_write" inside "chan_sip.c". In our previous version (11.2.1) we did not see those messages being printed (same verbosity level). We compared

Hello, I have problem to make SIP calls, i have asterisk + PC InterP4 + Digium TDM400P here is the content of the sip.conf: [SIP_PROVIDER] type=peer fromuser=testcomclient username=testcomclient secret=testr host=IP_SIP_PROVIDER ;dtmfmode=rfc2833 context=interne canreinvite=no ;allerid=Beer disallow=all allow=ulaw allow=gsm allow=g723.1 ; Asterisk only

Good afternoon list. I'm experiencing a problem with my SIP channel's. When I have an external connection for one of my SIP carrier's, I can listen to the client and the client listens to me normally. The problem is when I will transfer this connection, the call is mute for the extension I have transfered. Only the client hears normally. In the console of Asterisk generates the

Under 1.4.35 I get this message printed MANY times [May 3 21:41:21] WARNING[21567] chan_sip.c: Asked to transmit frame type 4, while native formats is 0x1000 (g722)(4096) read/write = 0x1000 (g722)(4096)/0x1000 (g722)(4096) [May 3 21:41:21] WARNING[21567] chan_sip.c: Asked to transmit frame type 4, while native formats is 0x1000 (g722)(4096) read/write = 0x1000 (g722)(4096)/0x1000

Good day! Have a weird problem with HT-286 and Conference room. I use Asterisk CVS-HEAD-06/04/04. Here it is: When HT-286 get into the conference room first and nobody in that room everything seems ok (with any codec HT286 allowed), but when HT-286 get into conference room when somebody already there, have got different HT behavior: 1. When HT use GSM codec => it connects to conference room,

I'm trying to pick up a ringing SIP phone (203) across the office with exten => *9,1,Pickup(783743) where 783743 is the local part of the number that our ISDN works on. I tried all of these first: exten => *9,1,Pickup(203) exten => *9,1,Pickup(SIP/203) exten => *9,1,Pickup(203@internal) and got a "declined" message back from my phone (snom 300), so I then

Dear all, I am getting the below errors when using asterisk. I am using sjphone for testing purpose. Below are the setting for sip.conf and extension.conf When i dial the number it rings on the remote telephone. but after ringing 1 time it will disconnect. Can anybody tell me what does this error means and the how to solve this issue. Thanking You, Joel sip.conf [general] context=default

When dialling in and dialling my extension, when answered I get " Read_channel ## vpb/1-3: Setting record mode, bridge = 0 WARNING[20499]: File chan_sip.c, Line 1111 (sip_write): Asked to transmit frame type 8, while native formats is 4 (read/write = 4/4) == Spawn extension (default, 1004, 1) exited non-zero on 'vpb/1-3' -- hangup on vpb (vpb/1-3) -- Hungup on vpb/1-3 complete --

Hi all, I did not get this error in Asterisk 1.2.5 release. I am testing on Asterisk SVN-trunk-r15187 to avail the PARKEDAT variable. - I park the call using ParkAndAnnounce - plays moh. - accept the call using ParkedCall The following errors are coming on the console and there is oneway audio - no audio after Music-On-Hold at caller's side. Please advice. I am testing using cisco 7902

anyone has idea what problem can be here, something with codec but i have today CVS version and grandstream phone with 1.5.0 firmware.I try to change codec in phone and also in asterisk-sip.conf but the same. What can be problem ? tnx, Tomaz *CLI> -- Executing Dial("SIP/102-767c", "CAPI/2:5") in new stack -- Called 2:5 -- CAPI[contr1/2003002]/0 is making

Hi all, i have a little problem to understand this warning message, it's annoying and it cause a lot of spurious in the log files. Im working with this scenario: a sip outgoing trunk (Trunk-out) that support only ulaw and all calls are always routed to this. a list of sip UAs that potentially can use any codec apart g729/g723. I setup the asterisk to do as mediaproxy so directmedia=no and

Hi i am trying to do the same thing: receive a call from a cisco callmanager and forward it to a SIP user. Asterisk is compiled with h323 support, and is configured as a gateway in the cisco callmanager. h323.conf: [general] port = 1720 bindaddr = 193.x.x.x ; this SHALL contain a single, valid IP address for this machine allow=all extension.conf: exten = 3298,1,Answer exten =

Hi, I have an issue which is kind of a catch 22 situation. I had outgoing calls to my new PSTN provider working perfectly. Then I started focussing on incoming calls. It seems that I can solve an error which gets my incoming calls working but that in turns means my outgoing calls don't work. - Strange Anyhow I was getting an error: Process_sdp: No compatible codecs! And from the SIP

Hello, I have transcoding card TC400P installed in server running Debian with Asterisk 1.4.23. Everything seams to be fine and after I boot up server I see in dmesg: 7.590966] Zapata Telephony Interface Registered on major 196 [ 7.590966] Zaptel Version: 1.4.12.1 [ 7.590966] Zaptel Echo Canceller: MG2 [ 7.610963] zttranscode: Loaded. [ 7.618969] wctc4xxp: tc400b0: Attached to