similar to: disconnect with various codecs

Hello all, I'm having the following problem. I have a Win95 PC in a WAN, and a Linux WINS. For the local subnets there's no problem, but the WINS seems to react very slowly for the WAN pc. - both WINS and win95 have the same workgroup; the workgroup is not in any computer name (as far as I know and can see) - ICMP echo about a 35 msec reply tcpdump shows a couple of 137 < - > 137

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello list, I've used Nut at a couple of sites, but all of them being Linux, Linux and Linux ;-) Now there's a new situation, with an MGE UPS having to interface to an OS-X PPC server (I'm guessing a 10.3.x version, more information follows) and a Linux server (running Ubuntu Dapper). The best I can think of is to have the Linux server

I've looked all over the archives, and I can't find the answer tot his. I have a machine called pendor, that's running my DNS, DHCPD, WINS, and is my router between my ethernet and token-ring networks, as well as my masquerading firewall/router to the dialup line. Yep, this machine does it all. I have this line in /etc/smb.conf: interfaces = 192.168.1.2/24 192.168.2.2/24 Where

Hi, I'm trying to compile icecast-kh (last version) on a OpenBSD machine. While I execute ./autogen.sh an error occurs: autoheader libtoolize --automake automake --add-missing automake: #################### automake: ## Internal Error ## automake: #################### automake: unrequested trace `include' automake: Please contact <bug-automake@gnu.org>. at

Dear all, Scannedonly 0.11 has been released. Scannedonly is a samba VFS module that ensures that only files that have been scanned for viruses are visible and accessible to the end user. The vfs module has a few new options to simulate on-access scanning for small (fast scanned) files. The clamAV daemon now has automatic database reloading. Documentation and downloads can be found at

Dear all, this is the first public announcement of scannedonly. Scannedonly is a samba VFS module that ensures that only files that have been scanned for viruses are visible and accessible to the end user. Scannedonly was developed because of scalability problems with samba-vscan: high server loads when (the same) files were requested often, and timeouts when large zip files were requested.

Hi, I've been able to make make install the Zaptel drivers (1.2). I'm using a b410p so I executed the following command make b410p. I tried this on multiple machines, but it always failes: root@asterisk:/usr/src/zaptel-1.2.11# make b410p [ -f misdn-b410p.tar.bz ] || wget ftp://ftp.digium.com/pub/zaptel/b410p/misdn-b410p.tar.gz --23:59:54--

Hi i've installed this software: ******************** SOFTWARE mISDN-1_1_7 mISDNuser-1_1_7 Asterisk-1.4.15 ******************** SOFTWARE misdn is correctly loaded by misdn-inist start Here there is the misdn.conf (copied from an existing and working installation with Asterisk 1.2.x and one BN8S0) ******************** MISDN.CONF [general] misdn_init=/etc/misdn-init.conf debug=0 bridging=no

Hi, I try to compile mISDN 1_1_9_2 (kernel: 2.6.32.13). I had the following compiling error: make[1]: Entering directory `/usr/src/linux-2.6.32.13' CC [M] /usr/src/mISDN-1_1_9_2/drivers/isdn/hardware/mISDN/sysfs_obj.o /usr/src/mISDN-1_1_9_2/drivers/isdn/hardware/mISDN/sysfs_obj.c: In function ?mISDN_register_sysfs_obj?:

Hi, Before diving into this, I would very pleased to know if someone could yes or no, successfully compile mISDN 1.1.8 on Lenny (latest RC1 or beta2 version) ? Regards After a fresh install on Lenny, I can reproduce at will : apt-get install build-essential linux-headers-2.6.26-1-686 cd /usr/src wget http://www.misdn.org/downloads/mISDN.tar.gz tar xvf mISDN.tar.gz cd mISDN-1_1_8 make ....

Hi, I'm bumping on this : cd /usr/src wget http://www.misdn.org/downloads/mISDN.tar.gz tar xvf mISDN.tar.gz cd mISDN-1_1_18 make <snip> In file included from /usr/src/mISDN-1_1_8/drivers/isdn/hardware/mISDN/core.h:9, from /usr/src/mISDN-1_1_8/drivers/isdn/hardware/mISDN/avm_fritz.c:20: /usr/src/mISDN-1_1_8/include/linux/mISDNif.h:791: error: field

Hello, we have an asterisk (1.4.21.2) with ZAP and mISDN channels, the mISDN are 2 incoming GSM Modems, each with 2 simcards. No, the mISDN line one and two are fine, but when I get a call on line 3 something with the time is wrong. Timeconditions fall through to off-hours even if the time of the call is clearly inside business hours, here a log excerpt: [Aug 26 11:04:36] VERBOSE[3112]

Hi, I have installed Asterisk 1.4 with mISDN with the install-asterisk.tar.gz script from beronet.com. On my system I have two cards, one a AVM Frit!Card Pci 2.0 and one HFC-S chip. I know both to work well with mISDN on my system from a previous installation. Now however, the AVM card works well at first glance, i.e. it "registers" incoming calls and works through the asterisk

I am getting quite a lot of these notices: Feb 1 10:22:01 NOTICE[2487] cdr.c: CDR on channel 'mISDN/3-2' not posted Feb 1 10:22:01 NOTICE[2487] cdr.c: CDR on channel 'mISDN/3-2' lacks end Feb 1 10:22:06 NOTICE[2471] cdr.c: CDR on channel 'mISDN/3-1' not posted Feb 1 10:22:06 NOTICE[2471] cdr.c: CDR on channel 'mISDN/3-1' lacks end Feb 1 10:22:17 NOTICE[1591]

HI, I tried to install asterisk and mISDN via http://www.asterisk.org/downloads/yum My machine is running with kernel-2.6.18-164.15.1.el5.i686 # grep kernel /var/log/yum.log Mar 21 16:09:28 Installed: kernel-2.6.18-164.15.1.el5.i686 Mar 21 16:09:42 Installed: kernel-devel-2.6.18-164.15.1.el5.i686 I've installed the following packages: # yum install asterisk16-misdn mISDN mISDNuser

Hi All I have noticed that when calling over mISDN channels the call itself is made over the channels listed in misdn.conf eg: 1,2,3,4 as misdn/1, misdn/2, misdn/3, misdn/4 etc. However, when looking through the CDR's the call gets logged as misdn/0, misdn/1, misdn/2, misdn/3, misdn/4, misdn/5 etc. I also noted that busy, failed, congested calls link mainly to misdn/0. The only logic I

Hi, Hi All, I've just delved into the world of asterisk and I'm having a few dtmf issues. Internally, amongst sip phones, dtmf is fine. Externally, if you ring from a GSM mobile, DTMF is fine, however if you ring from a standard phone, DTMF fails to register. I am attempting to use a quad port HFC-4S Beronet Card. I've been searching the web most of the last week and

Hi, I'm installing Asterisk on Ubuntu 6.10 When I first compiled the zaptel package I used: make clean make make install So far so good, but the following command failed: make b410p I did some digging on google and found a guide on how to install it manually, but the result was the same. I got these files ftp.digium.com/pub/telephony/zaptel/b410p/misdn-b410p.tar.gz

Just to add.... P[ 1] Transmitting 128 samples 2 misdn P[ 1] writing 128 bytes 2 asterisk P[ 1] Sending :160 bytes 2 MISDN P[ 0] misdn_jb_fill: written:160 | Buffer status:256 p:861fee0 P[ 0] misdn_jb_empty: read:128 | Buffer status:128 p:861fee0 P[ 1] Transmitting 128 samples 2 misdn P[ 1] writing 128 bytes 2 asterisk P[ 1] PH_CONTROL: channel:1 oad2:07nnnnnnnnn dad0:820055 P[ 1] --> DTMF

Hello, I have a strange problem with misdn.conf When I run asterisk, I have this message : Apr 3 23:00:25 WARNING[6824]: misdn_config.c:579 _build_general_config: misdn.conf: "use_callingpres=yes" (section: general) invalid or out of range. Please edit your misdn.conf and then do a "misdn reload". Apr 3 23:00:25 WARNING[6824]: misdn_config.c:579 _build_general_config: