similar to: verbosity in log files

Hi, all! when my h323 phone dial in Asterisk system, i can hear nothing. and the following is the log slice i picked from /var/log/asterisk/full. ps: i am using red hat AS5 kernel 2.6.18-53.el5,Asterisk-1.4.24.1, pwlib_v1_11_0, openh323_v1_19_0_1. Best Regards! 81948 [May 6 10:07:34] VERBOSE[11579] logger.c: -- Remote UNIX connection 81949 [May 6 10:07:51] VERBOSE[29627] logger.c:

Hi Everyone Asterisk 1.4.33 is running with Sangoma/Dahdi for analogue lines to Bell Canada. User claims that call hangup without any interferance to the phone set. Is there ANYWAY to find out which party hang-up the call or if the call was cut-off due to other reasons? I checked the *"asteriskcdrb"* table and it's pretty much useless in this case as it only logs the duration and

Hi Folks, I'm have Asterisk version 1.2.1 with a A101 PRI card. I'm working with the CLEC to bring up the PRI and inbound calls are hanging up at his end after a few seconds. I ran PRI debug but it only gives me minimal insight. " Ext: 1 Cause: Unknown (16), class = Normal Event (1)" He ran a trace and the only difference he is seeing is a "ISDN interface explicitly

Hi I have a strange behaviour; perhaps someone who had a similar issue can help. I have an Asterisk-1.4.21.2 connected via sip trunk to a Cisco Call-Manager 6.1 cluster. Two phones/users from the Cisco environment call extensions on the Asterisk. Phone 1 / Call 1 is parked on the asterisk using: exten => xyz,1,Answer() exten => xyz,n,Set(PARKEXTENSION=555) exten => xyz,n,Park() Phone

HI, I have 2 TDM400s plugged in a PC. I failed to use same channels to make a call to PSTN. It shows it can't establish connection after dial command issued. Below is the log. Actually, the call is established as I can hear voice from the called party but the softphone is still showing ringing. It seems the TDM card can't get an answered signal from PSTN. After 15 seconds, the call

Hello all, I am using asterisk 1.4.17 together with misdn, once in a while: -when a call was put on hold -the operator tries to call a internal party for transfering the call -the internal party doesn't answer the phone -the operator wants to get the external line backup again by putting the call "off hold" And then the external line is disconnected. an exact log of events is

Hi all, On an Elastix server with asterisk 11.13.0 I have no verbose logs despite the fact that it's OK in CLI, eg verbose set to 3 in my case Logger.conf [logfiles] ; ; Format is "filename" and then "levels" of debugging to be included: ; debug ; notice ; warning ; error ; verbose ; ; Special filename "console" represents the system console ;

Hi, I am having some trouble with parked calls timing out. In features.conf: [general] parkext => 800 ; What extension to dial to park parkpos => 801-820 ; What extensions to park calls on context=parkedcalls parkingtime=120 After the Park timesout it calls the phone that the call was parked from. If the phone is BUSY the call just get dropped. (Call waiting

Hi all, I have a connect between a siemens hipath & Asterisk system over PRI The connection works perfectly I can call from the Hipath to an Asterisk Extension. I want to allow the hipath extensions to dial out over a SIP trunk on asterisk but I keep getting "The number you have dialed is not in service" In this CLI I'm dialing from hipath extension 9 (prefix for sip trunk)

I have a PRI E1 link between Asterisk 1.4.24 and Alcatel-Lucent OmniPCX Enterprise R9.0. As EuroISDN it works fine. However, I need to move to QSIG because of a firmware upgrade on the Alcatel PBX which doesn't support EuroISDN (please don't ask why). Besides, I've read somewhere that 2 B Channel Transfers "should" work with * 1.4, the latest 1.4 libpri and QSIG. So this

Hey list ! When SIP debugging is enabled I don't want to sit down and constantly look at the CLI to debug and understand what happens. Is al this debug-informatie for SIP and/or IAX written to a log file ? I have 3 logfiles : debug, verbose and messages in logger.conf but they do not contain the SIP debugging information. Is there a way to create a logfile for SIP and/or IAX debug

Hi, I set up a ring group. I would like for people who select a certain voice menu option to ring a list of extensions (I have just one extension in there at the moment) and if it doesn't answer to go to an extension's voice mail. I am using a version of asterisk from CVS, last updated a couple of weeks ago. This line in extensions_addtional.conf sends the call to ringgroup 3 if

On 1.6.0.18-rc3 using app_fax.so, spandsp-0.0.5, anytime I use SendFAX asterisk restarts: [Nov 15 19:00:36] VERBOSE[17013] logger.c: -- Executing [s at fax-tx-test:1] ESC[1;36;40mNoOpESC[0;37;40m("ESC[1;35;40mSIP/nhi-rive rside-sip-00000000ESC[0;37;40m", "ESC[1;35;40mContext fax-tx-testESC[0;37;40m") in new stack [Nov 15 19:00:36] VERBOSE[17013] logger.c: --

I call the firm from my portable at home (zoiper softphone). I have internal extension 60, and I call the internal SIP-client 10 at the firm via an IAX-connection over internet. My colleague at phone 10 answers my call. I ask him to transfer me with my colleague at extension 50. He then presses "transfer" on the grandstream GXP2020 (I get music) and dials the number 50. Phone 50

Hi All. I have many days reading and research about asterisk and vicidial. I thing this issue is about asterisk and doesnt about vicidial. Isn't it? I have a problem with theses application (I already ask for help in vicidial forums), but I can not fix it. I have debian 5 with asterisk 1.2.24 and vicidial 2.0.4. This server has a IAX tunnel with another asterisk server B which connect to

I'm trying to track down a CPU spike we are seeing in a system. We have tracked down the spike to a single CPU and TID using that CPU. Indications are that it's asterisk running this TID. I'm trying to figure out what asterisk is doing on this thread around that time, but haven't been able to match the tid to anything I'm seeing in asterisk debugging. Is there a good way to

Hi All, Twice now in the past few weeks I've walked into the office to find that our 1.2.24 Asterisk process is sat at 100%, and that hundreds of thousands of log files in /var/log/asterisk exist, all at 312 bytes, containing: Aug 29 23:22:17 VERBOSE[24303] logger.c: Asterisk Event Logger restarted Aug 29 23:22:17 VERBOSE[24303] logger.c: Asterisk Queue Logger restarted Aug 29 23:22:17

Hi, I had asterisk 1.4.17 with the extensions which is configured in the sip.conf it was working fine. Now I am having the requirement to authenticate the SIP users through the OpenLDAP not through the sip.conf. Steps I have done : Did a check out by using the following command, http://svn.digium.com/svn/asterisk/trunk. [^] then given configure, make , make install. and taken the sample ldap

This is third time today that my Asterisk hangs up. It seams that I have problems with h323. I'm using ooh323 from Asterisk add-ons. I have the following configuration Asterisk 1.2.1 Asterisk-addons 1.2.1 Fedora Core 4 I'm using SIP phones and h323 trunk to my VoIP provider Like I said this is third time today that he hang's up. First time, I came at work and Asterisk was down.

Nik, Just curious - what is your telco setup? Do you have PRI with the specified D channels? You need to make sure that your telco is set up to have the D channels on 16 and 47. When you first start Asterisk, or when you log on to the CLI, do you ever see messages stating the B channels are successfully started? Let us know. -MC -----Original Message----- From: