similar to: NOTICE[180235]: chan_zap.c:7358 pri_dchannel: PRI got event: 6 on Primary D-channel of span 1

I have a serious problem that repeats very often, after 30 - 50 calls and I can only solve it by stopped and restarting * :-( After a while, * seems to loose track of something. When an ISDN call from PBX needs to go to the Telco, I get 'Ring requested on unconfigured channel 255/255 span 2' It's always channel 255/255 ??, the 'span' number is random Setup: * between Local

hello all, i'm using TE110P and all configuration prosess is done. but after i do the 'modprobe' for zaptel and wcte11xp, follow by ztcfg -vv and asterisk -vvvgc i have this error. *CLI> May 27 14:44:33 WARNING[3059]: chan_zap.c:8534 pri_dchannel: PRI Error: We think we're the network, but they think they're the network, too. May 27 14:44:34 WARNING[3059]: chan_zap.c:8534

System have been working great for weeks, using an average 40 of 120 dahdi channels. But today, I suddenly see scary things like this: -- Moving call from channel 5 to channel 7 [Feb 25 10:18:12] WARNING[17129]: chan_dahdi.c:10608 pri_fixup_principle: Can't fix up channel from 5 to 7 because 7 is already in use [Feb 25 10:18:12] WARNING[17129]: chan_dahdi.c:11535 pri_dchannel: Ringing

I receive this error on the asterisk console and it is pretty much ALWAYS coming up. Sometimes there will be a break where it does not display. We had our PRI provider test the lines and they claim that there is no signalling problem. It doesn't matter if there are no calls or if there are 10 calls in progress the error is still displayed. I also get an annoying popping or clicking sound

Hi all, So, we reverted the LibPRI version and tested it, and then tried with the latest version of everything. Still no changes. The BRI line is in PTMP. If we set the configs to PTMP in the genconf_parameters and try it, we get the following: [Jan 21 17:32:20] ERROR[20341]: chan_dahdi.c:12645 dahdi_pri_error: Unable to receive TEI from network! If we set it to PTP (which it is not) we

Hello list We're trying to get a HFC card running in NT mode. Zaphfc loads fine as module and ztcfg -v is run only once per reboot. Cabling is ok, the ISDN-TE gets ist power fine. The HFC card does not share any interupts. After the TE picks up the console (pri debug enabled) shows: Nov 21 18:42:20 NOTICE[13326]: chan_zap.c:7169 pri_dchannel: PRI got event: 6 on Primary D-channel of span 1

I also experienced this problem and the first thing that really helped out was changing the timing in the span line of the zaptel.conf. Change it to look like this (see below) and see if it helps out. I got the error much less after doing this and eventually got rid of the error completely by removing my raid drives, installing an IDE drive, enabling DMA mode on the Hard Drive, enabling APCI in

Is there someone out there that is using Chunghwa Telecom in Taiwan with asterisk? I have one there connecting using a digium 4 port fxo card. We can get and make calls. the problem is that about 40% of the time when we make a call - even if it is one that we have made recently - we get back "That number can not be compleeted as dialed" or something like that in Chinese. Any help

Hi all, I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM equipped with 1x TE410P and 2xJunghanns QuadBRI running in NT-mode. Connected to the BRI-Ports are 12 Fax-Modems (Elsa MicroLink ISDN/TL V.34) which are only operating in dial out analog mode to deliver fax messages. After a while of running fine (50-200 dial out connections) on some S0 spans the following message occurs

Lance, Have you configured your sip.conf to use these aprameters under General? ;externip=66.213.227.66 ;localnet=192.168.1.0 ;localmask=255.255.255.0 -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Lance Grover Sent: Thursday, June 02, 2005 9:39 AM To: Asterisk Users Mailing List - Non-Commercial

Hello, I get an Error every minute on the second card of two installed TE410P Cards in our System. The error is: PRI got event. HDLC Abort (6) on Primary D-channel of span 5(-8) PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 5(-8) Is it possible that there are known problems with 2 cards in one system? I'm running Asterisk/Libpri/zaptel from SVN branch-1.2-16008 I was

Hi all, I have 1 Card Digium TE412P and 2PRI E1. I have more problems with drops lines. The asterisk log is this: May 16 10:52:26 NOTICE[4465]: chan_zap.c:8194 pri_dchannel: PRI got event: Alarm (4) on Primary D-channel of span 1 May 16 10:52:26 WARNING[4465]: chan_zap.c:2287 pri_find_dchan: No D-channels available! Using Primary channel 16 as D-channel anyway! May 16 10:52:26 NOTICE[4465]:

Hi all, After running fine for a few months now asterisk seems to hang frequently , still functioning but the DAHDI channels seem busy (users report a busy signal when calling or being called) A reboot will allow it to run for another day or maybe 2 or 3 till the problem occurs again. running stock Asterisk 1.6.2.9-2+squeeze2 on Debian with stock kernel 2.6.32-5-686 i get the following

Can anyone shed some light on this, I have two asterisk boxes using heartbeat for failover. Sip traffic works just fine with the virtual IP but IAX does not. For example on my servers one server has the following: eth0 = 192.168.1.95 eth0:0 = 192.168.1.2 the other server has: eth0 = 192.168.1.220 if the first "Master" server goes down the second server will take that virtal IP for

I have a line in my kickstart file (ksdevice) # Network information network --bootproto=dhcp --device=eth0 --onboot=on # Default network to boot ksdevice=eth0 # Auto reboot (to being next install faze) reboot However its still poping up and asking me eth0 or eth1 for install? Has this operation changed? Thanks, Jerry

All of the mailboxes on this system are in MailDIR format. None of the users delete mail off of the server after POPing their accounts. This is the present setting: expire = Trash 7 Spam 30 expire_dict = proxy::expire Is that correct for MailDIR style mailboxes? It doesn't appear correct; however, I have not been able to find any specific documentation on expire with MailDIR style

Hi, I am getting this message on the * console on my first pri span. Pri show span show it is down, and I can't make any calls from the span. Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27

Hi fellow asterisk users, I am running Asterisk 1.4.29 with an Digium TE121 card (wcte12xp kernel module) an approx. 100 snom320. The whole installation is running without issues since 5 months. Without having changed anything on the asterisk server for at least 2 months, i noticed "clicking sounds" at external calls over the PRI. Asterisk constantly throws the following messages: ...

I frequently get this error message, it repeats itself hundred/thousands of times and never stops. chan_sip.c:7467 sipsock_read: Failed to grab lock, trying again... During this period, I can make no SIP calls what-so-ever. The only way I've been able to stop it is to killall -9 asterisk. Doing a restart now doesn't respond. Anyone know why? -- Daniel Jimenez

Hi all, Last night I went to replace an Asterisk 1.4 + mISDN + b410p box with Asterisk 1.6.2 and DAHDI BRI - to no avail. I had two servers so copied network setting etc from the working one, moved the card across, ran dahdi_genconf etc and it didn't work. Here's the console output with notices disabled: lucas*CLI> pri intense debug span 1 Enabled debugging on span 1 [Dec 16