similar to: phone comparison matrix

Hi, Windows 7 64-bit clients have a very high latency (constantly rising) using of tinc. 32-bit clients are working with normal speed. Does anyone have a solution for this problem? Viele Gr??e Dirk Krause

Hi, I'm trying to set up an Asterisk pbx based on a Fedora Core 1 Linux box (customized kernel version 2.4.24). I want calls from my SIP soft-phones to simply be dumped onto the PSTN line via a BRI (EuroISDN). I have a cheap HFC-S based PCI ISDN card connected to the NT1+ interface, so I need zaphfc. I've read everything I've found at www.voip-info.org, then I've downloaded the

How do I use... <%= link_to "All Facilities", :action => ''fac_log_all'' %> if I add :target => "_new" that is just a parameter and not a directive. I just want reports to print into a separate window. How do I do that? It''s not clear at all to me Craig

Am 08.12.2014 um 22:55 schrieb Rowland Penny: > Hi, It sounds very much like a SID problem to me. > > the user 'Fred' with the SID-RID > 'S-1-5-21-4036476082-4153129556-3089177936-1005' is **NOT** the same > user as 'Fred' with the SID-RID > 'S-1-5-21-2025076216-3455336656-3842161122-1005' > > You need to change the domain SID on the new

On 09/12/14 11:22, Denis BUCHER wrote: > > > Dear Marc, Dear Rowland, > > Le 08.12.2014 23:01, Marc Muehlfeld a ?crit : > >> Am 08.12.2014 um 22:55 schrieb Rowland Penny: >> >>> Hi, It sounds very much like a SID problem to me. the user 'Fred' with the SID-RID 'S-1-5-21-4036476082-4153129556-3089177936-1005' is **NOT** the same user as

Hi, My name is Erick and this is my first email on forum. My infraestructure is: Intranet with 2 pcs.. 1 dhcp for general use and net access (192.168.0.130) 1 static ip for Xen Dom0 (192.168.0.100) on 192.168.0.100 i have one DomU with ip 192.168.0.50 on 192.168.0.130 i use putty to connect to 192.168.0.50 (this work) i have nginx installed on 192.168.0.50! If i use "links browser"

We have the following setup. 192.168.0.1 NAT router 192.168.0.3 eth0 192.168.0.50 eth0:0 Two postfix instances. The first bound to 192.168.0.3 and the second to 192.168.0.50. The problem is that the NAT router can''t port forward the same port to two IPs. Is there any way to redirect outgoing port 25 from 192.168.0.50 to 192.168.0.3? -- Robin Lynn Frank - Director of

hi, I'm just download the latest cvs and try to use imaps. in mozilla I've got the following message window: ----------------------------- mail.int.bppiac.hu received a message with incorrect Message Authentication Code. If the error occurs frequently, contact the website administrator. ----------------------------- and there is only one OK button:-) and this happens always. what can be

Hello XP(SP3) seems to take a long time to update its list of shares after changing the NetBIOS name used in Samba (eg. going from "LINUX" to "UBUNTU"). Is there a command in Windows that can purge the data, and perform a new broadcast/WINS call to get the list of hosts and shares? Thank you.

I`m trying to shape both upload (eth0) and download(eth1). I made this script to acomplishthis but the filters are not working even though the classes and qdiscs are created. What am I doing wrong? #!/bin/bash tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1 htb default 10 r2q 5 tc qdisc del dev eth1 root tc qdisc add dev eth1 root handle 1 htb default 10 r2q 5 tc class add dev

I thought I had this nailed but.. now I''m seeing spots.. I''ve included my models below, feel free to ignore them. I''m really just after an example that works. I couldnt find one on the wiki... which is fair enough considering Ricks patch: http://dev.rubyonrails.org/changeset/4022 that fixed them only went through 5 days ago.. Cheers -henster

hi, the current cvs don't allow to login with mozilla just such messages: imap-login: Jun 25 01:29:30 Info: Aborted login [192.168.0.50] imap-login: Jun 25 01:29:39 Info: Aborted login [192.168.0.50] even the today afternoon messages was correct (or at least able to login to the imap). -- Levente "Si vis pacem para bellum!"

So far I have been used to using linux to provide simple routing from my network to others using commands such as ip route add 192.168.1.0/24 via 192.168.0.4 etc and it has all worked perfectly. I also use smoothwall GPL to provice vpn services, however I have hit on a problem and am not at all clear on the way in which to proceed. I now need to provide a route to services, the access to these

https://bugzilla.netfilter.org/show_bug.cgi?id=1255 Bug ID: 1255 Summary: nftables SNAT is not working Product: nftables Version: unspecified Hardware: All OS: All Status: NEW Severity: critical Priority: P5 Component: kernel Assignee: pablo at netfilter.org

On 09/12/14 16:27, Denis BUCHER wrote: > > > Dear Rowland, > > Le 09.12.2014 12:41, Rowland Penny a ?crit : > >> On 09/12/14 11:22, Denis BUCHER wrote: >> Dear Marc, Dear Rowland, Le 08.12.2014 23:01, Marc Muehlfeld a ?crit : Am 08.12.2014 um 22:55 schrieb Rowland Penny: Hi, It sounds very much like a SID problem to me. the user 'Fred' with the SID-RID

Hi all. I fear I''m slightly offtopic with this question, but I''ll keep it short: who is (or feels) responsible for the #lartc irc-channel in oftc.net? I''d appreciate if that person would get in contact with me (off-list) in order to discuss some ideas I have. Thanks in advance. Bye, Mike _______________________________________________ LARTC mailing list /

I have searched through the api several times through and can''t seem to find this. <%= link_to ''Help'', {:url => ''https://www.example.com/page?AppServeHelp''}, {:target => "_new"} %> but this doesn''t work as it still prepends the current server/controller space on the url itself. How do I accomplish this? Thanks Craig

IVR Number :17275691533 When I try it from xlite configuring my provider directly, it works perfectly. When I try to dial out from dialer , it doesnt work. [sip8] type=peer username=user fromuser=user authuser=user secret=password host=8.14.146.111 nat=no canreinvite=yes insecure=very disallow=all allow=g729 allow=ulaw context=default dtmfmode=rfc2833 What cld be the reason ? --------------

First, I''m *very* new in rails, i''m loving it and didn''t encounter any problems in the simple tasks i''m doing yet. What I''d like to do is to open a new window containing the info of a Model (something like the show scaffold method) with a simple "close" link to close the window. Can someone please give me some directions? thanks in advance.

Hi, I''m trying to enable ssh (when that works, want to add:pop3s,smtp,web) from the internet to the firewall but it does not work. I managed to DNAT ftp to a host in the loc network (192.168.0.50) successful but I don''t know why SSH: Does not work for me: ACCEPT net fw tcp 22 Works from the loc network: ACCEPT loc fw tcp 22 I have tried also with (no success): AllowSSH