similar to: Asterisk on Linksys WRT54G

Hi, I configured asterisk on redhat linux 9 box. I installed two different ip softphones (SJPHONE and X-PRO) and got them registered with asterisk. The call from one phone to another does get routed via asterisk, but there is one problem coming up. As soon as call is accepted by the end user , it is automatically disconnected with the error "cannot align media streams". If I enable SIP

Hi all, I have the Asterisk set up and 2 softphone (Xlite) set up on two other PC. With the following configuration, I can use one softphone (2000) to call the other one (2001) and/or the voicemail at 2999. Here is my problem: 1. When I dial 9+nxxx-xxxx with one of the softphone to the PSTN via X100P card, I got busy tone. (i.e. I want to use the phone line which is connected to the

I have a few SIP phones, Cisco 7960s, and was looking into implementing some compression, ala G.729. I'm looking into purchasing a g729 licenses just to get an idea of performance and voice quality, over lans, wireless and single channel isdn. Does anyone have positive/negative experience w/ getting licenses/support from Digium? Hows the sound quality compared w/ g.711? Is 729 better

Hi, I am very new to Asterisk. I wanted to know how to retrive the Voicemails. I could see some voicemails assosiated with some extensions. Any ideas?? --------------------------------- How much free photo storage do you get? Store your holiday snaps for FREE with Yahoo! Photos. Get Yahoo! Photos -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi All We are unable to hear any voice where as in tcpdum it shows that RTP is flowing both ways ERROR CONDITION --------------- -- Executing Dial("SIP/2001-f6c4", "SIP/2000|20") in new stack -- Called 2000 -- SIP/2000-0ead is ringing -- SIP/2000-0ead answered SIP/2001-f6c4 -- Attempting native bridge of SIP/2001-f6c4 and SIP/2000-0ead Have searched web and

Hi list, i've problems with my * server and the 4 phones which are linked to it. i've 2 grandstream bt100 with the firmware upgraded to 101, a wi-fi phone (i don't know its brand) and another ip phone i don't know its brand. with this sip.conf : [general] port = 5060 bindaddr = 192.168.100.229 context = default ;x changed from default to sip localnet = 192.168.100.0/24

Hi Folks, I am newbie to asterisk. Recentely I have installed asterisk on Linux Fedora 2 box. After reading some document, I tried to configure the server. When I connect to our server, SIP user-agent shows that I am logged in. But it doesn't show my system(client) IP when I issue command at astrisk CLI. The O/P is as below. *CLI> sip show peers Name/username Host

Hrm, All of a sudden for some reason Wait() and Playback() are returning non-zero and its causing calls on my inbound SIP leg not to complete. I'm not sure why -- Executing Answer("SIP/2181-4518", "") in new stack -- Executing Playback("SIP/2181-4518", "silence/1") in new stack -- Playing 'silence/1' (language 'en') == Spawn

ERROR CONDITION --------------- -- Executing Dial("SIP/2001-f6c4", "SIP/2000|20") in new stack -- Called 2000 -- SIP/2000-0ead is ringing -- SIP/2000-0ead answered SIP/2001-f6c4 -- Attempting native bridge of SIP/2001-f6c4 and SIP/2000-0ead Have searched web and archive w/o good results. Thks in advance for any help, Dave sip.conf -------- [general] port =

Hi; I have entries as below in DB, mysql> select * from sip_buddies; +----+------+----------+------------+---------+------------+--------+------- -----+------------+----------+------+ | id | name | context | defaultip | host | mailbox | type | regseconds | ipaddr | username | port | +----+------+----------+------------+---------+------------+--------+-------

When somebody call me on my pstn # cable connected to my fxo card it does not work when I check my computer the following error shows Connected to Asterisk CVS-v1-0-12/05/04-19:46:25 currently running on asterisk1 (pid = 2160) Verbosity is atleast 3 -- Remote UNIX connection -- Starting simple switch on 'Zap/1-1' == Starting Zap/1-1 at incoming,s,1 failed so falling

hi do u have the sip phones extensions in the extension.conf and are they in the right context (sip-incoming)??? are the sip phone registering to asterisk?? try stop asterisk and reconnect as asterisk -vvvvvvvc to check see them registering... ________________________________ From: asterisk-users-bounces@lists.digium.com on behalf of Sistemista WebSolvingJaa Sent: Fri 7/1/2005 6:43 PM

Hi, I am using the Grandstream HandyTone 486 as a SIP Adapter with a regular phone. Asterisk configuration is listed below. When I attempt to place a H.323 call, I receive the following errors: - Executing Dial("SIP/2000-3029", "OH323/##########@xxx.xxx.xxx.xx:1720|20") in new stack Aug 13 09:13:03 WARNING[20497]: channel.c:1806 ast_request: No translator path exists

I have 2 X100P card and configured everything based on configs here http://www.onlamp.com/onlamp/2004/01/22/examples/config_files.txt I changed the area codes to match mine. When I try to dial out I get app_dial.c:554 dial_exec: Unable to create channel of type 'Zap' A zap show channels gives me this Chan Extension Context Language MusicOnHold 1

I have successfully configured two servers and I am now trying to connect via iax. When I attempt to call from one ext, 2006(server viop1) to extension 3006 (server voip2) I receive a timeout or "call failed 403 forbidden. The information I am receiving from the console is below. Apr 26 10:53:32 WARNING[311313]: channel.c:1745 ast_request: No channel type registered for 'IAX'

Problem I have is this. outside firewall (extension 2003) can call me inside firewall (extension 2000) and all is fine. If I call from inside firewall (extension 2000) to outside firewall (extension 2003) I hear no ringing and person at other end can pick up and I hear for maybe a half second then I go to voicemail. If I add another extension on the outside then communication between outside

I want Asterisk to delay answering the POTS line via a Wildcard (a Zap channel) by some period of time, either a number of rings or just a number of seconds. I have tried this: [from-pots] exten => s,1,Wait(30) exten => s,n,Answer ... exten => s,n,Dial(SIP/brian&SIP/joe,10,H) exten => s,n,Voicemail(u2001) exten => s,n,Hangup exten => s,103,Voicemail(u2001) exten =>

Hi all, -------- I have installed a TDM400 with one active FXS port (TDM10B) an connected it to a Siemens Euroset 2015 analogue phone. I have installed some smom IP phones to the network as well and configured them as usual (sip.conf). For configuring the TDM10B I have used FXO signalling in /etc/zaptel.conf and in /etc/asterisk/zapata.conf. I definded the TDM channel and the Snom phones to the

Steve, Here is the config, I pulled from my server, that works with D'Link Phones: Main Menu -------------------------------------------------------------------------------- SIP.CONF [general] port = 5060 ; Port to bind to (SIP is 5060) ;bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) bindaddr = 67.109.153.236 disallow=all ;allow=ilbc allow=gsm allow=ulaw

Hello to everybody, does anybody knows how to install Asterisk on a Linksys WRT54G(S)? I had read in the Wiki that it is possible. If somebody has a tip, this would help me very much. Regards Bastian