similar to: QoS settings of the SIPURA ATA

Hi all, Does anyone run Asterisk on FC4? with Digium's TDM40B cards. any success stories? my Intel 865 M'd+ Intel 3.0GHz freezee during installation (FC4). Please any comments? Kumara

Dear all, I am happy to tell you that I received a Digium's TDM20B card for my Asterisk box today. but the phone jack is RJ45 instead of RJ11. So Please I need precise instructions to connect a phone to this card. please, assume that I have a phone (a normal analouge phone connected to the one end of a cable with an RJ11 jack (at the phone side). and now I want to connect the other end to the

Greeting!, I read somewhere that without cdr, Mysql etc it is possible to take outgoing-call-logs to a text file. (I am not sure please). is it really possible ? if so, how do I do it? any links to refer? Thank you. Kumara

Hi All, I have this codec problem, I use "gsm" in my iax.conf file and in teliax settings also, but the error is still appearing as below. please help me. Kumara Starting simple switch on 'Zap/1-1' -- Executing Dial("Zap/1-1","IAX2/kumara@teliax/01194777070239|30|tr") in new stack -- Called kumara@teliax/01194777070239 -- Call accepted by

Hi all, again, with another question ( may be the final one) I have come up to this point, means when I dial a number in my analogue (panasonic) phone I hear the ring at the end through my asterisk box (via TDM20B card) that uses IAX2 over teliax and after time-out, it gives this message. Starting simple switch on 'Zap/1-1' -- Executing

Hi all, i need sample xml configuration files for linksys pap2, linksys pap-2t, sipura 2100, sipura 2102, 1001, 3000 and 3102. All of these are linksys/sipura products. So if anyone has these sample files then plz share. -- Best Regards Rizwan Hisham Software Engineer Axvoice Inc. www.axvoice.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi I wonder whether anyone got the Sipura ata 3000 to decode British Telecoms callerid and pass it to asterisk? The userguide seems to suggest that this is not possible, is that right? Conrad

Voxilla news story: http://voxilla.com/voxstory84-nested-order0-threshold0.html Two new products * A Sipura 2000 in a linksys box: Linksys PAP2 Phone Adapter * A combination NAT router with 2 FXS ports: Linksys RT31P2 Broadband Router Jim James H. Thompson jht@lava.net

HI there Simple question :-) Why there is always only qos examples for upload and not download stream of adsl? I have a linux router which shares 5 wireless "customers" my neighbours and me to one adsl link 512kbps download 128kbps upload ... Now does it make sense to do qos on the linux router for download for us? Say if someone is using ssh from outside ... So I tried to apply the

Hi, I have an older phone with touch screen from Philips. It have it connected to Sipura 3000 FXS port and majority of features work ok. But phone also has touchscreen and web browser that I'd love to use for accessing my local web pages. But the phone only allows me to setup ISP phone number (username and password) and it wants to call it to get to Internet. Since it is connected to

2 Asterisk servers 1.2.12.1 Connected via IAX2, same switch, GigE, no packet loss, etc 1 with a Sangoma A101 for a PRI to the PSTN Ulaw QoS enabled NAT for the registered ATA boxes, no nat between the * servers Faxing inbound: Call from PRI hits the first Asterisk server Then talks to the 2nd via IAX2 NVFaxDetect receives the fax, converts to PDF and emails it out Works great!

Hi, We're installing an * box next week (pbxtra from fonality) and I'm trying to come up with a solution for remote users that want a phone in their home. I need VPN and QoS capability, wireless support would be a nice to have. Ethernet handoff is fine, i don't need integrated dsl or cable modem... I've been googling and cruising the list and can find bits and pieces

I'm struggling to get my VOIP installation to be acceptable. I'm looking for advice on what else I can look for. My system: o Teliax VOIP service, voip-ny1 proxy o RCN Cable Internet Service (3Mbps download, 500kbps upload, 6ms average jitter) o 3.2 GHZ P4 Server (runs asterisk, firewall, other stuff) o server lightly loaded o Linux kernel 2.6.19.2 o Shorewall Firewall software with

Hi, I'm trying to configure Sipura 2000 (behind NAT) which connects to Asterisk (public IP, no NAT) and having interesting results. When Sipura is behind Linux/NAT firewall it works great and no special NAT settings on Sipura are necessary. The issue I'm having is when Sipura is behind Linksys broadband NAT router. Sipura gets registered with Asterisk just fine, but I can't hear

I have been trying to read everything I can find on Sipura 2000 and Asterisk. I am trying to make the Sipura-2000 act as two analog lines off my asterisk. I have followed (what I believe) the example on http://www.voxilla.com/Article39.phtml and I still can't get my Sipura to register with my Asterisk server. I can re-config my Sipura to talk to fwd, or voice-pulse connect and it works

First of all, I'm not knocking Sipura/Linksys. I have heard very good things about their products. I'm just wondering if they are the only quality shop on the market. I know about the zoom 5801 where you can't dial out the FXO from SIP, only from the FXS port. And I have heard similar about the HT-488 also. I want to know if anyone else makes ATAs where all of the features work

If I have multiple Sipura 3000 device how can I dial out properly? I can receive call without any problem and that's working really well. Caller ID is shown and when someone call he get's the welcome message the same way I have it configure with the X100P card. I don't seem to have any echo problem with the Sipura 3000 (but I do with X100P cards) My main concern is for

I am trying to configure the FXO port on a Sipura-3000 for use with Asterisk. When I connect to the Sipura to dial out on the PSTN line connected to the Sipura's FXO port, it gives me the dialtone of the PSTN line and then I can hear the DTMF for the number I dialled beforehand. It does work but the customer perceives this delayed second DTMF feedback as "unprofessional" and the

This may not be the right place to ask, but I have an annoying issue with a Sipura/SPA1000-2.0.10(e) ATA device connected to an Asterisk box. (The system is remote to me, so I've only been able to observe this by dialling into a VoIP phone on-site, then run commands on the box remotely!) First of all it's all working fine connected to an Asterisk box and the user can make/take calls

Sipura does include STUN as an option. It has for quite some time. We are using it with all of our Sipuras behind NAT'd gateways and it works great! Try upgrading to the latest Sipura firmware rev. Darren Nay > -----Original Message----- > From: John Todd [mailto:jtodd@loligo.com] > Sent: Saturday, May 22, 2004 1:57 PM > To: asterisk-users@lists.digium.com > Subject: