similar to: Asterisk and Cisco CallManager Integration

Hi, Where can I find information on H.323 for Asterisk and/or integration with Cisco CallManager in particular? <http://www.voip-info.org/tiki-index.php?page=Asterisk+Cisco+CallManager+Integration> I have oh323 working on Asterisk. Since the CallManger I am working with is running 3.3.3 I cannot use SIP... Thanks, Adi

Hi, I need to setup a demo for asterisk and need some help here please. The demo is connecting to Asterisk a Cisco 7970 SIP (ver. &.0) and a SIP client on HP iPAQ via a wireless hotspot. I need to configure both with the same extension with a shared line like in Cisco CallManager. This way if the extension is called both iPAQ and the IP phone ring and the user gets to pick up using either.

I need to pick all the Asterisk and Cisco People a little. My company has a Cisco Call Manager 3.3, configured via h323 gateways. I have remote users that I want to place a SIP Server on the external WAN and be able to connect their phones to the system and be able to get calls and call people in the office going through the Cisco Call Manager and the h323 router. My only problem is that Cisco

I have experience problems like this in a different scenario. It is usually due to codec translation problem. What is the default codec set on CCM for the IP Phone and the default set in Asterisk? Make sure the defaults are the same. Try G.711 Michael

I have installed Asterisk@Home on a PC here and need to have it forward calls to the PSTN. We have Cisco CallManager 3.3.4. However I found out that this version doesn't support configuring SIP Trunks. Is there an alternative solution. Thanks Walid -------------- next part -------------- An HTML attachment was scrubbed... URL:

Some of you may remember back in May the thread on using Asterisk as a voicemail server for a Cisco Callmanager system. My own Callmanager system is integrated into an Asterisk server for voicemail (and other things). Back in May I was using H323 for integration, but since I've upgraded to CCM 4.1 I have switched over to SIP. The integration with H323 required using Call forwarding to send

Hi to all, I already setup asterisk on REDhat 9.0 linux machine. I will have 4 physical phone lines and 10 IP phones for it to use. I have a network setup already. Is getting TDM400P - 4port FXO from digium enough to start? Do I need anything else? Thank you

Hello, I am new to this list and to asterisk and going through the archive file I did not find an answer to my problem. I have a VoIP network working fine with multiple gateways registered to a Cisco H.323 Gatekeeper. I have successfully registered Asterisk as a GW in that network and also successfully registered two X-Lite SIP Client to asterisk that call to each other. I want to connect to

Hi all, Any one tried installing Asterisk on Linksys WRT54G? We have but facing problems with SIP to SIP calls. The phones ring and calls are established but we cannot hear any voice at all. I tried allow=all in the general section but did not work. So I forced ulaw. Can any one please check it out and let me know what is wrong? Here are the conf files: Asterisk Version: Asterisk

On Wed, 23 Jul 2003, Yifang Dai wrote: > I wish! My company just spend a lot $$ on the shinny CCM phone system, so I > don't think I can change that easily... But if I can get asterisk to > talk to CCM via h323, and prove it's usefulness, I might have a chance > to use * in the branches... Well, good luck, then! > By the way, do you know if we can get *'s VM to

I am trying to build PWLIB to get OH323 up and running. I am not an expert in linux but can someone help telling me how I can do the following: How can I add a directory to LD_LIBRARY_PATH?! Thanks in advance ---------------------------------------------------------------------------- ---------------------------------------------------------------------------- ---------------------- For

Hello everybody, i got and asterisk and a CCM configured thru SIP, and in the sip show peers appear Name/username Host Dyn Nat ACL Mask Port Status CCM 10.60.27.138 255.255.255.255 5060 OK (1 ms) but when i enabled sip debug in the CLI got this ------------------------------------------------------------ Sip read: SIP/2.0 400 Bad

Hi.. I am trying to do something but it is giving me some hard time here. I have an IAX2 trunk to FWD which is registered and working just fine. I have => 011|. as my dial pattern to allow that. But if I want to dial a toll free number I would have to dial 011*1800XXXXXXX What trunk dial rule should I use to enable anyone to call a toll free number by simply dialing 1800XXXXXX instead of

Hi, Just want to understand the difference between Asterisk Versions and please correct me if I am wrong, I understand they are: Stable CVS CVS Head I am a newbie and about to install Asterisk on SUSE Server. Can someone please advise what is the best version type and number should I use. My environment is not so big. I only wish to eventually get my asterisk to talk to Cisco CCM 3.3.4.

Has anybody successfully (or I guess unsuccessfully for that matter) implemented Cisco Call Manager and used an * box for voicemail? I checked the wiki and google and I see some references to Call Manager Express and *, but CME is completely different than CM. If anybody has done this or has any insight, it would be appeciated. We are trying to migrate ~ 300 users off of Cisco Unity and

Hi, I appreciate it if someone knows what is available for SIP web phones out there. I am interested in putting a soft phone on a website that registers with Asterisk using SIP. Then, when someone uses it, it directly calls into an asterisk call queue.. Any ideas? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, i'm searching and trying, but can't get it working. I'm trying to send calls from Cisco Callmanager to Asterisk with oh323 channel driver. Therefor the asterisk is defined as a H323 Gateway in the Cisco Callmanager. The Call comes from CCM to Asterisk and it works but i didn't get the called number. This is needed because i want to make Voicemailboxes. If i connect via

Hello Everyone, I want to start using Asterisk with Cisco IP Phones 7960 / 7940/ and 7905. Any info or help is appreciated. I know I'll have to use SIP but if I want to use the phones off site meaning from my home for example, how can this be done? Also, regarding external lines what are the options for Asterisk? Thanks Walid -------------- next part -------------- An HTML attachment

Hi, I just want to know what is the easiest way to have Asterisk route calls to PSTN. Hope any one can help me. PS: Any solution using a Cisco device is preferable. Thanks Walid -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050112/1604835f/attachment.htm

Dear list, I am running Asterisk CVS-v1-0-12 what is this called in terms of Asterisk versions convention? Is it Stable , Head, latest release !!! Excuse me if the question is too basic, but your help is appreciated. Thanks Walid -------------- next part -------------- An HTML attachment was scrubbed... URL: