similar to: How to setup two Asterisk boxes - keeping theregistration

Afternoon all, After doing some test on my asterisk box I can successfully receive calls to my Asterisk PBX to a SIP phone from The Telstra PSTN network Dial out from a sip phone is also not an issue, all calls connect and terminate normally. If I call the Asterisk PBX say from PSTN in Zap1-1 and out through ZAP2-2 back to the PSTN (after entering the correct pin off course) the card does not

Greetings *`s, I am having what appears to be a small problem, but the frustration is erally getting to me, what am I doing wrong here ? I used AMP to set up a custom menu, so if caller presses 1 it goes to ext200, if caller presses 2 it goes to ext201 etc etc... Now I have created a third option that when the caller presses 3 it must play a sound and hang up. No rocket science yet. When

I had posted about winbind picking the wrong domain to this list about a week ago and this was the problem I was still trying to solve when I must have messed something else up. SO! Winbind WAS working (even though it was picking the wrong domain) I re-ran smbpasswd -j LMC -r <our PDC> -U administrator I get prompted for the password, enter it and I am told that I joined the LMC

Dear all, I am using the nlme package to find the best model using non-linear mixed effects model. After the all the other things needed, I did > M1<- nlme(NShrubs~A*exp(-B*CED),data=DataSg,fixed=list (A~SITE,B~1), random=B~1,start=list(fixed=c (1.66,1.66,1.66,1.66,1.66,1.66,1.66,1.66,0.0038)),control=lmc) and it was ok. However, the data showed to need random parameters at both

Sorry to be a pest....but I worked on trying to figure this out all weekend....and I'm still at a loss.... Here is all the info collected to date (these are all copy/paste from emails I sent to the list late last week) I've been looking thru manpages and online for help..... I *think* I've got winbind mostly setup (somehow) but it seems to be using the wrong Domain. Some info: I

CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p at virginia.edu> Cc: Rusty Russell <rusty at rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst at redhat.com> Cc: Shreyas Bhatewara <sbhatewara at vmware.com> Cc: "VMware, Inc." <pv-drivers at vmware.com> Cc: Francois Romieu

CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p at virginia.edu> Cc: Rusty Russell <rusty at rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst at redhat.com> Cc: Shreyas Bhatewara <sbhatewara at vmware.com> Cc: "VMware, Inc." <pv-drivers at vmware.com> Cc: Francois Romieu

Hi list I have a requirement that I just don't know how to address - I don't think its strange but can't find any pointers anywhere. I have a user that wishes to have a "multi phone" divert. By that I mean "calls made to his extension say Ext200 can be redirected to a different extension say Ext400 and also to his home landline. Doing the dial is fine using

Hello, I have a problem with the srptools to connect my Dom0 to the scst over IB ressources. *When i''m on the Debian kernel (without Dom0) * root@blade1:/# ibsrpdm -c id_ext=003048ffff9dd3b4,ioc_guid=003048ffff9dd3b4,dgid=fe80000000000000003048ffff9dd3b5,pkey=ffff,service_id=003048ffff9dd3b4

I've been looking thru manpages and online for help..... I *think* I've got winbind mostly setup (somehow) but it seems to be using the wrong Domain. Some info: I am running RH7.3 Kernel 2.4.18-3 Samba 2.2.7 In my smb.conf file I have: [global] security = Domain workgroup = LMC winbind separator = + winbind uid = 10000-20000 winbind gid = 10000-20000 winbind

... Initializing.. hi all, I've a a very basic setup, directly two boxes via two MHEH28-XTC and I cannot activate them. One peculiar thing is I get (randomly & !often): [85947.090496] AMD-Vi: Event logged [ [85947.090539] IO_PAGE_FAULT device=09:00.7 domain=0x0000 address=0x00000000f6ffb000 flags=0x0050] [85947.298509] AMD-Vi: Event logged [ [85947.298550] IO_PAGE_FAULT device=09:00.7

hello all i,m newbie in asterisk and now want to sip and h323 connection. this is my scenario: phone(ext100)--->freepbx---sip--->system1---H323--->system2--->freepbx--->phone(ext200) when i call 100 from 200, every thing is ok and phone is ringing but when i call 200 from 100, it says "service unavailable". i debug asterisk in my system 2 and see below message:

I have a rather long dial plan, but it includes support for call waiting. However, the setgroup checkgroup commands don't seem to be working. Can anyone help on this one? Excerpts are below. First exten-vm is dialed and then dial-new. As I understand, priority 1 increments the active channels for the caller and then in "dial-new" priority 8 increments for Arg3, or the Callee

Dear All, I run following code to estimate the blocks using cokriging ( my data set has more than 50,000 data points). All the things run finely but Once I run the predict.gstat function it gave the error message - "memory.c", line 58: can't allocate memory in function m_get(). I run this code on LINUX sever but result is same. Would any one please be able to give a solution for

SAMBA 3.0.21c (domain is LINBOXTEXT) Windows 2000 SP4 (domain is ADTEST) Hello, I've established an interdomain trust relationship between SAMBA and Windows. Samba domain users can log into the Windows domain, but Windows domain users can't log to the SAMBA server. For example, if I try to log as "ADTEST/dupond" from Windows to SAMBA, SAMBA log says: [2006/11/15 20:17:05,

Hi, I'm doing a os course at federal university of minas gerais and my final work is to make a change in the linux os. My group decide to create a kind of undelete for ext3. We have already read about this in past threads. What I want to know is how ext3 deletes a file. What it deletes from the inode. thanks. ____________________________________________________________________ Carlos

Hi list, I can successfully build the driver modules; hdlc, dlci, syncppp, and lmc from the 2.6.18-128.1.14 kernel source rpm, and have managed to create a 'wan kmod' rpm. It all works fine for IPv4, but now I need IPv6 for ppp connections, which doesn't work for me. I think I'll need to back port Krzysztof Halasa's 'ppp for generic hdlc' patches to the

Hi there, I am trying to learn samba, ldap and co. now I installed a test net consisting from three computers haydn: this is the pdc with haydn.redcor.home (ip 10.168.1.102) memphis: tis is a windows box -> memhis.redcor.home (ip 10.168.1.103) chrissy: this is a unix box -> chrissy.redcor.home (ip 10.168.1.100) dns server, ldap-server and samba are all running on haydn. on haydn samba

On Sat, 17 Oct 2020, Joe Perches wrote: > On Sat, 2020-10-17 at 09:09 -0700, trix at redhat.com wrote: > > From: Tom Rix <trix at redhat.com> > > > > This is a upcoming change to clean up a new warning treewide. > > I am wondering if the change could be one mega patch (see below) or > > normal patch per file about 100 patches or somewhere half way by

On Sat, 17 Oct 2020, Joe Perches wrote: > On Sat, 2020-10-17 at 09:09 -0700, trix at redhat.com wrote: > > From: Tom Rix <trix at redhat.com> > > > > This is a upcoming change to clean up a new warning treewide. > > I am wondering if the change could be one mega patch (see below) or > > normal patch per file about 100 patches or somewhere half way by