Displaying 20 results from an estimated 5000 matches similar to: "3-way conference using zap channels -- how is it done?"
2006 May 10
0
Sharing an outside line between a modem and a TDM400
I have an analog modem and a TDM31B and one outside line.
I want to use the modem to dial out on demand for a PPP network connection
and also use the outside line with the TDM31B. I am willing to have the
modem work at 28.8Kbps. I want a lock of some sort so that voice calls do
not break in on data calls and vice versa.
My first thought was to have the modem connected to the TDM31B and have
2004 May 28
1
TDM31B and Zaptel: FXO port not recognized?
I have a brand-spanking new TDM31B (3 FXS, 1 FXO) and when I start wcfxs
(the only module that recognizes the card) from Zaptel 0.9.1 I get:
Zapata Telephony Interface Registered on major 196
Freshmaker version: 63
Freshmaker passed register test
Module 0: Installed -- AUTO FXS
Module 1: Installed -- AUTO FXS
Module 2: Installed -- AUTO FXS
2004 Sep 03
2
Using AVM Fritz!PCI as zap interface
Hello!
Is there a way to use AVM Fritz!PCI as a ZAP interface and have it
configured for ZAP channels?
Thanx in advance!
Roland Zagler
mailto:r.zagler@fog.at
@fog smart partners
2004 Dec 15
3
wcfxs causing constant CPU spikes
Hi All,
I have a problem (at least I think it's a problem) where the wcfxs
module causes constant CPU usage spikes. The card being used is a
Digium Wildcard TDM400P with 3 FXO modules and 1 FXS (TDM31B).
Monitoring my otherwise idle asterisk box (with top) I see once every
3-5 seconds hi (hardware interrupt) spike to 30%-40% and then drop
back to 0 again. This is the case wtih both asterisk
2007 Nov 26
0
Interesting Conference Request - Can this be done ?
VMukti MeetingPlace
----- Original Message -----
From: "Steve Totaro"
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
Subject: Re: [asterisk-users] Interesting Conference Request - Can
this be done ?
Date: Tue, 18 Sep 2007 19:43:08 -0400
Dovid B wrote:
> Hi List,
> I have a client that has an interesting request. He wants to have
>
2007 Sep 18
3
Interesting Conference Request - Can this be done ?
Hi List,
I have a client that has an interesting request. He wants to have people call in to a conference room and all be able to talk however they should not hear each other. There should be admin access to for one user to call in and be able to listen in to everyone that is talking (they may want this admin to be able to talk to).
Any ideas ?
Thanks.
Dovid
-------------- next part
2004 Jun 24
1
Latest CVS, Grandstream and Zaptel bug?
Hi,
I'm confused as anything by this bug. I'm hoping that it is just
something screwy in my config.
I have 1 Cisco 7960 and several Grandstream BT101 & 102's, and a Digium
TDM31B.
I'm running the latest CVS (CVS-HEAD-05/27/04-17:22:40) of both
Asterisk and the Zaptel driver on Fedora Cora 1.
When I make an outgoing call on the Cisco phone, everything works fine.
I'm
2004 Aug 11
1
Starting with digium cards
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=US-ASCII">
<META NAME="Generator" CONTENT="MS Exchange Server version 5.5.2653.12">
<TITLE>Starting with digium cards</TITLE>
</HEAD>
<BODY>
<P><FONT SIZE=2>Hi
2004 Aug 12
0
AW: Starting with digium cards
You've gotta be kidding!
You bought two cards without knowledge of anything ?
DOS = no way....
Read here:
http://www.voip-info.org/wiki-Asterisk+Hardware
-----Urspr?ngliche Nachricht-----
Von: Saurabh Garg [mailto:Saurabh.Garg@bbsgroup.com.sg]
Gesendet: Donnerstag, 12. August 2004 05:16
An: asterisk-users@lists.digium.com
Betreff: [Asterisk-Users] Starting with digium cards
2004 Apr 06
1
Zap channel still in use after MeetMe conference ends
Here's the scenario:
1. I call out through * using a X100P card to somebody. Then I transfer them to a MeetMe conference and that all works.
2. After the conference is over everybody hangs up but "show channels" shows that the Zap/1-1 channel is still in use by MeetMe and the analog line is not freed up for re-use. Ever.
Any clues? Thanks!
2007 Sep 27
1
Zap channel stuck in conference
Hello, I have a strange problem with one of my Zap channels. A user told me
that he was in a voicemail system during a call, hit the Flash button, and
the call hung up. Now we get no dialtone on the phone hooked up to the
channel. Here's the status of the channel:
jmartin at rogue:~$ sudo asterisk -r -x "zap show channel 7"
Parsing /etc/asterisk/extconfig.conf
Channel: 7
File
2010 Mar 06
0
Audio problems ins conference zap->sip
Hello!
I have several problems in the audio one belonging to asterisk at
conferences between ZAP - SIP. I hope that you may help me.
1 Problem
When the audio establishes a call between two canals, some zap and another
sip itself one listens interrupted in one of the senses, exactly in zap sip,
with audio cuts. Words lose at random, in that connection, however in the
sense sip zap the
2003 Jul 23
3
2 B channels for ISDN cards
Hi,
Is it possible to use 2 B channels simultaneously
with either I4L or CAPI drivers?
We use AVM A1 (Fritz) PCMCIA with I4L driver and
AVM B1 PCMCIA with CAPI driver.
Thanks,
Michael.
2004 Jun 20
1
Data over Voice through Asterisk
Hi,
I'm trying to make a dialup internet connection through my asterisk
PBX. When I bipass the Asterisk box, I can get 51600bps. When I run
through the asterisk box, I'm limited to about 21600bps.
I have a TDM31B card.
Any help on speeding these connections up would be good - I was on the
understanding that if you bridged the channels, then the call should
essentially flow straight
2003 Jun 14
0
Study in London! Earn 2 degrees
The AIU ? London BIT is designed to equip you with the technical and commercial
understanding to commence a successful career in a high-tech field
or in any organization, which relies on IT.
click here to contact us
AIU - London's unique one-year Master's degree can provide you with the most
sought after and versatile IT knowledge and abilities. Complement your education and
accelerate
2016 Nov 25
2
Recent updates for CentOS7?
> -----Original Message-----
> From: CentOS [mailto:centos-bounces at centos.org] On Behalf Of Johnny Hughes
> Sent: Friday, November 25, 2016 10:13 AM
> To: centos at centos.org
> Subject: Re: [CentOS] Recent updates for CentOS7?
> Then we will commence work on the OS tree and ISOs. Historically, this
> takes 10-21 days for the full tree and ISOs .. but except for the
>
2004 Sep 07
1
Monitored outbound dialing via Zap interface?
I'm using a T100p to interface to a channel bank and from there to analog
PSTN lines. Because of my particular setup I have to do post-connect inband
DTMF dialing - which takes up to 5 seconds for a 10 digit number, assuming
0.5/sec per digit (ie. using "zap/g1/31|5|D(6045551212)". Even with an
'outside transfer' voice prompt before commencing dialing my users are
getting
2013 May 29
2
Patch to discourage unencrypted key generation
>>> configuration holes are the *default* configuration. ssh-keygen
>>> creates passphrase frees by default if you simply hit "Enter" a few
>>> times, and there is no way I've ever seen for ssh_config to reject
>>> them by default when loading local keys or loading them into an
>>> ssh-agent.
>>
>> So where are your
2006 Jan 05
2
Splitting the list
I've changed the heading because this really is another thread. I
think it inevitable that there will, in the course of time, be other
lists that are devoted, in some shape or form, to the concerns of
practitioners (at all levels) who are using R. One development I'd
not like to see is fracture along application area lines, allowing
those who are comfortable in coteries whose
2008 Nov 20
1
[LLVMdev] Bugzilla Offline
Dear All,
We'll be doing some pseudo-emergency maintenance on the Bugzilla
installation on the LLVM server this afternoon (basically moving files
to a larger partition to avoid further disruptions of service). As this
will be done by our IT staff, I don't know exactly when they will
commence, but for now, just don't use Bugzilla even if it appears to be up.
I'll have our IT