similar to: 403 forbidden on SIP register

Hi all, I registered a SIP account at budgetphone.nl/talkin2ya.nl Receiving calls works like a charm, I even redirected my normal PSTN number to the number I got from them so everything ends up in my * server. Before I ask them to take over my normal phone number I wanted to test all of it, so I ordered some calling minutes to test. Now I cannot get outbound calling to work with them. Anyone here

All, I have AAH 1.0 installed using Digium TDM04B and Grandstream GXP2000 phones. All seems well other than the phones have to be reset up to 5 times per day. It is like they lose thier ip connection or maybe thier SIP connection. Has anyone else experienced this issue? I have the phones set for static IP addresses and that doesnt seem to help either. Any help would be greatly

ONLY ON MONDAY! Well it used to work - calls between my aaln's that is. I moved from debain to redhat (same conf. files for asterisk) and this is what I get.. looks like several errors. errors I never got before. Also asterisk isn't observing the digits as I dial them like it used to however it still trys to route the call when I'm finished dialing. Anyone with a though on this?

Hi, Anyone here using sipgate.de ? It worked for months, but for a couple of days now I'm unable to register with them. My account is ok, because I can login to the website. Asterisk keeps showing me: Feb 25 23:50:18 NOTICE[5144]: chan_sip.c:5269 sip_reg_timeout: -- Registration for 'XXXXX@sipgate.de' timed out, trying again (Attempt #n) I looked at the sip debug stuff, and all I

I would like to hear stories from people using TAPI, CTI or CallerID software with Asterisk. What are you guys using, setup examples, etc. Has anybody sucessfully integrated SugarCRM with Asterisk and how did you do it. Are you running callerid software? Did you stumble into problems like using tapi and callerid software returned both the callerid and calledid? Hope you can help me out with

Hi everybody :) I am a new member here and hope that someone gives me a hint for my problem: Let's say I am at work and my SIP phone (KPhone in my case) is connected to my private Asterisk. I want to call my wife at home so her SIP phone rings. She does not pick up the phone (maybe she is somewhere in the house and has to run to the phone) so after 15 seconds her cell phone should ring.

Hi everyone, I have a number of SIP registrations going fine, but am trying to get a new provider going, and they have no sample Asterisk SIP config. They have been helpful, but keep falling back to the way they "think" packets should be flowing, and I've been trying to figure out how the Asterisk config should look like to get the SIP packet to look correct. Now, they say that

Hello ! I would like to get working a Fritz PCI card using chan_misdn operating in ptp mode. Afer compiling mISDN into the kernel and building chan_misdn Asterisk stops loading with : [chan_misdn.so] => (Channel driver for mISDN Support (Bri/Pri)) == Parsing '/etc/asterisk/misdn.conf': Found UnLocking config_mutex == Registered channel type 'mISDN' (This driver enables

I would like to have asterisk pass along the caller ID phone number to a database server on a my local network (the same network that the * server resides on ) so that our customer service app. can pull up customer data automatially. Asterisk passes along caller ID to the phones fine, can someone tell me how to make it pass this info to my database server? Any suggestions would be greatly

Does anyone have a good resource to learn how to program the soft and hard buttons on a Cisco 7940 or 7960 phone? Using SIP Firmware...thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060303/e5e63834/attachment.htm

Hi all, I've been searching the wiki and google for a couple of days now but cannot find any reference to a timing source on OpenBSD. I have * CVS-v1-0-02/15/05-21:54:52 (I always do a cvs -q up -Pd before compiling) running like a charm on OpenBSD 3.6 Now I want to setup some IAX trunks to work and 3 friends and some meetme rooms but it looks like I need a zaptel timing source. Anyone can

Does anyone know if the 7912G (which the wiki says can do either sccp or sip) uses the 7940/60 sip firmware? I ask this because the only firmware I can seem to find on TAC for the 7912G is sccp, no sip...if it takes it's own firmware and doesn't use 7940/60 firmware, can someone point me to the right location for it? Thanks, Marty Mastera M3 Resources marty@m3resources.com Phone:

I have an asterisk box and SIP / IAX2 phones. To call out, users have to add 0 (zero) before a real telephone number. That means, that if they want to call someone that has a number 123456, they have to call 0-123456. Simple, right? This has a serious drawback though - when someone calls us from the number 123456, we see the callerID 123456, and we're unable to use the callback/redial

Hi, I read a lot about US providers that can terminate a PSTN number for you and offer IAX or SIP connectivity. Does anyone know such a company in The Netherlands ? I read about Unet. Anyone with experience with them ? Any information is welcome. -- Michiel van Baak http://lunteren.vanbaak.info michiel@vanbaak.info GnuPG key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x7E0B9A2D

I have a call center where we're looking at converting it from a traditional PBX w/ digital phone "agent" sets (keyless phones) that have headsets to a SIP based environment. I am having trouble finding anything on the market that resembles this in the VoIP world. For reference, we're currently using Inter-Tel Agent Sets, which are basically a digital phone with out any keypad,

Hi, I found some issues with Snom 320 message retrieve key. This button works only when the MWI does not blink! If MWI blinks and I do press retrieve button I get "Unknown" on display and busy tone. From the sip debug it looks like that Snom does not send credentials to Asterisk which responds with 407 Proxy Auth required. I have loaded Snom with latest 5 firmware. No change. I'm

Hi all, My BRIstuffed 0.2.0-RC7k is running fine on my debian box for voice calls over ISDN2. Now I want to implement receiving incoming faxes into my setup so I did a google and some reading on the wiki. I got the spandsp 0.0.2pre10 package compiled and installed, patched asterisk's apps makefile and compiled * again. This all worked out fine. When integrating the RxFax into my dialplan the

Heya list, I need some advice/experience. Some of our customers are asking us about DECT solutions for their asterisk install. Some others will not go to asterisk if there won't be a DECT solution. They now have a Siemens or a Samsung PBX. Those PBX-es come with a DECT basestation and optionally repeaters etc. All those basestations speak some own protocol to the PBX, so we cannot use them

Hello everyone. I'm again bothering you with a bit of a problem, hopefully not really a problem. I just need someone to tell me this is ok :-) I'm planning on having two * machines on the open internet (ie: not behind a NAT) and having them talk to each other using IAX2. I can handle all the fire walling requirements in this case easy because at least one of the *'s has a fixed

Hello, I have a question. I set up an extension to 1234 exten => 1234,1,Dial(SIP/1234@sip.greentone.com:5060) And when I dial that extension I got in SIP message "403 FORBIDDEN" Can somebody tell me why I cannot call that extension? When I am not using Asterisk I can call that extension without any problems. My SIP proxy is VOCAL. I am new here so I do not know a lot yet. Thank