similar to: sipredirect question

Hello, I read http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+SIPredirect I wish to configure asterisk as a redirect server. I have badly understood this command . ASTERISK | sip agents nated ======SER When sip agents send INVITE to the proxy i want ser send this one to ASTERISK . How asterisk can send 302 messages with the good info in

Hi folks, I've just been reading about the above command and wonder if anyone has made use of it for load-balancing or if doing so would be completely inappropriate!? I'm thinking of the scenario where there are a number of Asterisk gateways and incoming SIP traffic. From what I've read, with a box in front receiving all incoming traffic the SIPRedirect command could be used to

Hello All, I have managed to get my cisco and asterisk able to talk to one another I think. But cannot make a call from a phone behind call manager to the asterisk server. I have followed the cisco asterisk integration on the wiki. I have also setup a number 3000 for dialing for current local time and date on asterisk. I can call from a sip phone behind asterisk, no problems. The problem

I am trouble finding a configuration that works for ChanIsAvail and SIP. My two providers are Voxee and Teliax. I have these lines in a macro exten => s,n,ChanIsAvail(SIP/teliax&SIP/voxee) exten => s,n,Cut(CH=AVAILCHAN,-,1) exten => s,n,NoOp(AVAILCHAN= ${CH}) ; Dial the available Channel exten => s,n,Dial(${CH}/${ARG1},60,t) Looking at the execution, I can see what the AVAILCHAN

ChanIsAvail returns the channel ID plus "-<session>". How can I edit ${AVAILCHAN} to remove this session ID, so I can use its contents in a subsequent Dial statement? Dialing on Zap just gives a warning, but dialing a SIP channel completely errors out. ------ extensions.conf snippet------------- ; ; Main Home number (8901) ; ; Bedroom1 exten =>

I sent this earlier under "Editting variable contents" but no-one has responded. So, the subject is now more to the problem, instead of the solution I was trying to implement. ChanIsAvail returns the channel ID plus "-<session>". How can I edit ${AVAILCHAN} to remove this session ID, so I can use its contents in a subsequent Dial statement? Dialing on Zap just gives a

Hello I am trying to setup ChanIsAvail function in the extensions.conf file so that user should use the available channel to call out, but immediately after the function like, zap channel hangup. Here is the copy of my extensions.conf file and messages display on consol while making the call. Please help me to fingure out this issue. Thanks Deepak Extension.conf : exten =>

I am trying to construct a macro for long distance dialling. I have two internet feeds, I have all routes including Teliax on Internet A and a static route to Voxee on Internet B. I thought I could use the dialplan entry below which uses the ChanIsAvail() command to check the connection, but this returns the provider but not the username, so I don't understand how to use this for real

I am trying to use ChanIsAvail to detect the best route for a call. I am testing by dialing an extension that is then forwarded to the DID. Normally it will be an incoming PSTN call that is forwarded. When I try it, I get put on hold for a few seconds and miss the beginning of the recorded message. Any ideas what is going on? -- Executing ChanIsAvail("SIP/501-304d",

I have two server Server_A(outbound call) for agent login and agent make a outbound call from here and pass into server Server_B call extension.conf exten => _91XX.,1,AGI(agi://127.0.0.1:4577/call_log) exten => _91XX.,n,Dial(SIP/${EXTEN}@192.168.53.197,,tToR) exten => _91XX.,n,hangup() Server_B[192.168.53.197] for call forwarding extension.conf exten =>

Hi, I'm trying to use ChanIsAvail to build a resilient 'dialout' macro. The logic is simple; try Zap/g1 (a group of two E1s), and if that fails, try locating a channel via DUNDi. Here's a massively cut down version to illustrate the problem I'm having. macro dialout ( dest ) { ChanIsAvail(Zap/g1); noop(Value of AVAILCHAN is ${AVAILCHAN});

Hi, all. I'm making my first foray into AEL. I'm starting with a simple macro, but I've already encountered an odd behaviour. I'm wondering if someone can shed some insight: Asterisk 1.2.9.1 macro newPlaceCallPSTN { s => { TIMEOUT(absolute)=7200; NoOp(Analog Out List: ${ANALOGOUT}); ChanIsAvail(${ANALOGOUT}); NoOp(Available Out List:

I'm testing ChanIsAvail context and it is not working for me. exten => 55,1,ChanIsAvail(SIP/11&SIP/21) exten => 55,2,Cut(theChannel=AVAILCHAN,,1) exten => 55,3,Dial(${theChannel},r) exten => 55,4,Hangup exten => 55,102,Goto(s,4) It is not dialing SIP/21 when I'm talking on SIP/11, it execute Hangup instruction instruction. According to notes: The channels are checked

Hi. I'm currently setting up a particular conference: 3 members (a,b,c), a can speak with b and c, b and c can speak only with a and not between them. I found my possible solution with paging/intercom using option "d" (full-duplex), but I need to make ringing the phone in intercom. Now I set auto-answer=6 but after first ring the phone hangup the call. There is a way to using

Here's my situation. I have two receptionists that answer incoming lines. Each has a 7960G with 5 incoming lines each. I'm trying to set this up so each line on each phone doesn't utilize call waiting. My problem seems to be that ChanisAvail(Sip/cisco1&Sip/cisco2&Sip/cisco3&Sip/cisco4&Sip/cisco5) always returns cisco1. Here are the sip.conf entries: (mind you,

Hi, is it possible to let asterisk issue a SIP redirect? A SIP invite command by a SIP client should be answered by 30X Temporarly moved to SIP/.... Is this possible with asterisk, maybe from within the dialplan? (reinvite is not what I'm looking for, because it does not completely release the originally called SIP server, e.g. if reinvite fails, ...) Roger.

A call comes in and goes into the queue, the queue dials a sip channel using a macro. The macro plays a set of options to the callee and if the callee presses 3 it sets MACRO_RESULT=CONTINUE and the macro ends. For some reason the caller goes back into the queue rather than continueing on in the dial plan. Why is this, i could have sworn in 1.2 if i set MACRO_RESULT=CONTINUE that the

Here is an example of a couple of macros that help me where I have a SOHO with a home phone line and a work phone line. If I pick up line 2 my work line I would prefer the call I make to go out my office phone line same with if I pick up line 1 my home phone line I would prefer it go out my home line but want it to roll if needed. So with this little macro it is possible for that to happen.

Okay, another Cisco related issue (sorry!). Single Asterisk box at location 1. Single Cisco box at location 2, however the Cisco is also the PBX for location 3 (same physical machine, calls routed via VoIP). Trying to have Asterisk be able to call EITHER Call Manager location. The single SIP trunk in CCM (version 6.1 mind you) only allows a single device pool to be selected. So configuring calls

Hi, So I've done my research on Chanisavail, read the wiki, checked the archive but can't seem to find anything to suit my scenario. I've played around with it a lot, but I'm still scratching my head on what I need to do. What I need is to be able to accept a call by SIP and ring all telephones that are not in use (which just so happen to be on Zap interfaces, but might be SIP