similar to: Now it is working

Dear all, I am happy to tell you that I received a Digium's TDM20B card for my Asterisk box today. but the phone jack is RJ45 instead of RJ11. So Please I need precise instructions to connect a phone to this card. please, assume that I have a phone (a normal analouge phone connected to the one end of a cable with an RJ11 jack (at the phone side). and now I want to connect the other end to the

See: http://lists.digium.com/pipermail/asterisk-users/2004-September/063348.h tml -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kumara Jayaweera Sent: Tuesday, June 14, 2005 1:46 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] RJ45 instead RJ11 in Digium's TDM20B card help meplease

Hi all, Does anyone run Asterisk on FC4? with Digium's TDM40B cards. any success stories? my Intel 865 M'd+ Intel 3.0GHz freezee during installation (FC4). Please any comments? Kumara

Hi all, again, with another question ( may be the final one) I have come up to this point, means when I dial a number in my analogue (panasonic) phone I hear the ring at the end through my asterisk box (via TDM20B card) that uses IAX2 over teliax and after time-out, it gives this message. Starting simple switch on 'Zap/1-1' -- Executing

Hi all, I have a vergin Linux box (FC3) and Digium's TDM20B card installed in it. I followed the Digium's quick intallation guide. donwloded CVS successfully, installed in this order zaptel>libpri>Asterisk and got this error without installing asterisk in my box. ***************************************************** (this is the end of the screen dump) /usr/bin/ld: cannot find -lidn

Greeting!, I read somewhere that without cdr, Mysql etc it is possible to take outgoing-call-logs to a text file. (I am not sure please). is it really possible ? if so, how do I do it? any links to refer? Thank you. Kumara

Hi all, I am going to have a TDM20B FXS card and sit in it in my Asterisk box, I need out going calls only. I am quite a newbei of it, I hope your tips and tricks with valuable links. Thank you Kumara

Greetings! to all Now, with some hard time and help from many genurous people's in the list, I have come to this point with my TDM20B card & my teliax's IAX2 account. I hope someone may help me with this issue mentioned below. I have already selected my codec as gms in my iax.conf as well as in teliax's "my account page" but still i have the same error when I attempt

Hi All, I have this codec problem, I use "gsm" in my iax.conf file and in teliax settings also, but the error is still appearing as below. please help me. Kumara Starting simple switch on 'Zap/1-1' -- Executing Dial("Zap/1-1","IAX2/kumara@teliax/01194777070239|30|tr") in new stack -- Called kumara@teliax/01194777070239 -- Call accepted by

Morning, I've installed asterisk on FC4 and had a few problems with zaptel stuff. Having installed it on SuSE I was able to check a few things that were different. When installed with the RPMS, the udev stuff gets put into the normal 50-udev file under /etc/udev. On SuSE, it worked when the necessary zaptel section was in a separate file name 55-zaptel.udev (the name is arbitrary,

Hello. I am a spanish student, so excuse my English. I have this HW: - 2 X100P PCI with two analog lines plugged in. These lines are two extensions of a panasonic PBX. Zap/1 = X100P <-- analog line --> extension #237 PBX Panasonic Zap/2 = X100P <-- analog line --> extension #245 PBX Panasonic - 1 TDM20B with two analog telephones plugged in. Zap/3 = TDM20B

I have a TDM20B and asterisk compiled fine. The drivers have been loaded (wcfxs and run ztcfg -vv, I see the drivers loaded with lsmod). Asterisk starts up fine. I am using the default configuration files that are made when you do a "make samples". I was wondering if someone had a link or website that stepped someone through this kind of setup. What I want to do right now, is use a

Hi all, yesterday afternoon, I called through my provider (teliax). but from the evening, I get this error. (below). then I checked in My Account page ans support page in teliax. and I saw that they have given new setting (to another proxy sever). I followed new settings. my Asterisk server is connecting to the teliax. but still I con not make called. it shows this error. If somebody had this

Specs: Fedora Core 3. Dual P3 600 (Dell PEdge 1300) SCSI Disks 1x X100P (channel 1) 1x TDM20 (channels 2+3) 1x Knockoff X100P (channel 4) I am looking to have all local and all toll free calls go outbound through the Copper line, and all long-distance and international to go out through the Vonage line. This way I can eliminate LD on my home line, and pay minimal LD charges through

Hi, All I am looking for Suppliers/resellers from Dubai - UAE to buy some VoIP products and Digium's TDM cards. could some one send me some contact information in this regards?. mainly I want to buy Hardware SIP phones, VoIP gateways and DTM cards (FXS). Thank you Kumara

I am trying to find an example of how to set up my FXS Station Card in my Asterisk. I have (1) XP100P I have (1) tdm20B (2 Port FXS) Could someone tell me if this is correct? /etc/zaptel.conf fxsks=1 fxoks=2 fxoks=3 loadzone=us defaultzone=us /etc/asterisk/zapata.conf [channels] ; language=en ; ;X100P Port 1 context=inbound-analog signalling=fxs_ks usecallerid=yes echocancel=yes

Dear friends, I have written the following lines in R console wich already exist in pdf file systemfit: data( "GrunfeldGreene" ) library( "plm" ) GGPanel <- plm.data( GrunfeldGreene, c( "firm", "year" ) ) greeneSur <- systemfit( invest ~ value + capital, method = "SUR", + data = GGPanel ) greenSur I have obtained the following incomplete

Taking the Grunfeld data, which is built-in in R, for example, (1)How can I construct a dataset (or dataframe) that consists of the data of all firms in 1951? (2)How can I calculate the average capital in each form over the period 1951-1954? What I can imagine is to categorize the data by firm, and then select the data between 1951 and 1954 for each firm, but how can I do it? Thanks, Miao

Dear all, I want to draw ticks on the 3rd and 4th row of a lattice. How do I do this ? In my search of the help, I discovered a parameter alternating,which kind of says where the ticks will be but does not suffice for me. I am running this command : - barchart(X03/1000~time|Company, data=df1[which(df1$time!=1),], horiz=F,

hello i try use Wine in mandriva extreme 2.1 i got 2 game and i try emulate this two games 1 is steel fury i got something like this in terminal[/code][alex at localhost win_e]$ cd Steel\ Fury\ -\ Kharkov\ 1942 [alex at localhost Steel Fury - Kharkov 1942]$ wine starter.exe [alex at localhost Steel Fury - Kharkov 1942]$ fixme:mixer:ALSA_MixerInit No master control found on HDA ATI HDMI, disabling