similar to: channel.c:1884 set_format: Unable to find a path from g729 to gsm

Greetings! to all Now, with some hard time and help from many genurous people's in the list, I have come to this point with my TDM20B card & my teliax's IAX2 account. I hope someone may help me with this issue mentioned below. I have already selected my codec as gms in my iax.conf as well as in teliax's "my account page" but still i have the same error when I attempt

Hi all, again, with another question ( may be the final one) I have come up to this point, means when I dial a number in my analogue (panasonic) phone I hear the ring at the end through my asterisk box (via TDM20B card) that uses IAX2 over teliax and after time-out, it gives this message. Starting simple switch on 'Zap/1-1' -- Executing

Hi all, yesterday afternoon, I called through my provider (teliax). but from the evening, I get this error. (below). then I checked in My Account page ans support page in teliax. and I saw that they have given new setting (to another proxy sever). I followed new settings. my Asterisk server is connecting to the teliax. but still I con not make called. it shows this error. If somebody had this

I am using Teliax to terminate my calls, and I have 3 licenses' for g729 from Digium. "show translations" verifies that the registration took place. When I place a call, having "allow=g729" as the only allow option in iax.conf, I get the following error: WARNING[361]: chan_iax2.c:6017 socket_read: Call rejected by 208.139.204.228: Unable to negotiate codec If I place a

Hi all, Does anyone run Asterisk on FC4? with Digium's TDM40B cards. any success stories? my Intel 865 M'd+ Intel 3.0GHz freezee during installation (FC4). Please any comments? Kumara

Dear all, I am happy to tell you that I received a Digium's TDM20B card for my Asterisk box today. but the phone jack is RJ45 instead of RJ11. So Please I need precise instructions to connect a phone to this card. please, assume that I have a phone (a normal analouge phone connected to the one end of a cable with an RJ11 jack (at the phone side). and now I want to connect the other end to the

Greeting!, I read somewhere that without cdr, Mysql etc it is possible to take outgoing-call-logs to a text file. (I am not sure please). is it really possible ? if so, how do I do it? any links to refer? Thank you. Kumara

Hi, I have just signed up with Voxee.com and have attached my Asterisk server to dial them via IAX2. Below is the start of the log which dials the number and promply hangs up when the call is answered, with the logs saying that the channel is not compatiable. I have traced this down to the g.729 codec which I don't have installed. Any ideas on how to force that the codec not be used?

Has anyone had problems getting their preffered codecs on the Teliax web interface taking effect? I have two accounts, two separate yet similarly configured * servers. On one account the settings took right away - on another server I am getting no result. In fact, no matter what I change the settings to, only the old codecs are usable (otherwise * says it can't negotiate a codec). Teliax

I use the Teliax service with the IAX2 protocol. I noticed 2 days ago that I was not registered with the Teliax server. I used the "iax2 show registry" command and found I was not registered with Teliax. I issued a reload command in asterisk in order to connect again. I went to the Teliax website and noticed a message which stated clients may need to reboot due to changes made with

I am having a problem with one of my callers who is using either g729 or alaw.  I can do alaw but not g729 so asterisk should negotiate alaw right?  In fact from the sip debug it looks like it does, but then I get the dreaded "channel.c:5630 set_format: Unable to find a codec translation path: (g729) -> (alaw)" and the call hangs up.  Why? Last minute thought: Is it possible that

On Thu, May 14, 2020 at 11:31 AM John Hughes <john at calva.com> wrote: > On 14/05/2020 08:10, John Hughes wrote: > > I am having a problem with one of my callers who is using either g729 or > alaw. I can do alaw but not g729 so asterisk should negotiate alaw right? > In fact from the sip debug it looks like it does, but then I get the > dreaded "channel.c:5630

I'm sitting here with my dunce cap on. My weak excuse is that I haven't ever played with g729 before. I have a Sipura 841. I have the phone config set to use g729. Its appropriate sip.conf entry, and the IAX stanza for my ITSP all set to disallow=all, allow=g729. But as soon as I dial, I get a complaint from the server: -- Call accepted by 66.225.202.72 (format g729) --

The other end is sending g729 even though it was not negotiated. The other end should not do this and it usually seems that the other ends that do send g729. This was recently fixed. See https://issues.asterisk.org/jira/browse/ASTERISK-28139 Richard On Thu, May 14, 2020 at 1:11 AM John Hughes <john at calva.com> wrote: > I am having a problem with one of my callers who is using

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3034 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050629/596126bc/smime.bin

I am trying to create a %100 g729 (with no transcoding) system (using a Soekris, of course). I am running AstLinux with the native sounds, g729 is the only codec allowed, %100 SIP (g729 only allow=) - I think I am covering all of my bases. I have only "format=g729" in voicemail.conf. On an incoming call to a mailbox, everything goes well until recording the message. When the

> From: "John Hughes" <john at calva.com> > To: "Asterisk Users Mailing List, Non-Commercial Discussion" > <asterisk-users at lists.digium.com> > Sent: Thursday, May 14, 2020 2:10:45 AM > Subject: [asterisk-users] I can do alaw, ulaw and gsm; remote can do g729 and > alaw; asterisk wants to translate g729 -> alaw. WHY? > I am having a

We are unable to call certain 800 numbers through Teliax but I thought I would post this here and see if anyone else had the same problem with either Teliax or other carriers. The 800 numbers causing problems pick-up the call right away and are in the US - American Airlines (8004337300) and Staples (800-378-2753) - we can call many other 800 numbers just fine. Our asterisk setup has a 4-port

Good evening all, hope everyone in the US had a nice Thanksgiving! On one of our internal servers, I decided to make the leap from 1.4.2x to 1.6.2.0-rc6 so I could start learning about the changes and new features that have been implemented. I upgraded all the configs, removed all the deprecated stuff, etc -- well went well. However, I noticed after the upgrade, when dialing into an

Hello everyone, One more little problem with a %100 g729 setup. Native moh: musiconhold.conf: [default] mode=files directory=/mnt/kd/moh/default random=yes ; Play the files in a random order ls /mnt/kd/moh/default fpm-calm-river.g729 fpm-calm-river.ulaw fpm-sunshine.g729 fpm-sunshine.ulaw fpm-world-mix.g729 fpm-world-mix.ulaw Place a call on hold: Jun 1 14:55:30