similar to: FATAL: Error running install command for wctdm

I'm chasing down a pop/click type of disturbance on a PBX system. Strangely, the disturbance is only heard by the outside caller, the internal recipient hears the caller crystal clear. This seems to have crept up when upgrading the zaptel driver to the 1.2 series while running 1.0.10. I went ahead and upgraded the entire system to 1.2.4. The system is a ~2Ghz AMD 32bit system, with 512MB of

Hi List, I am having some trouble with installing the latest version of ztdummy on a CentOS Kernel 2.6 system. I have installed a few Asterisk systems on Slackware Kernel 2.4.x without any issues, unfortunately there is no choice about this distro, or kernel as it has been preinstalled by someone else. And so I am in the dark with an unfamiliar distro and kernel. I am fairly sure the

/bin/sh: -c: line 0: syntax error near unexpected token `;' /bin/sh: -c: line 0: `if [ -n "" ]; then if [ -f ]; then mv -f .bak ; fi; cat .bak | grep -v "alias char-major-250" | grep -v "post-install torisa /sbin/ztcfg" | grep -v "post-install wcfxsusb /sbin/ztcfg" | grep -v "alias wctdm" | grep -v "post-install wctdm

I go to my Zaptel 1.4.0 folder and run ./configure; make linux26; make install and I don't see any errors. This is out of my modprobe.conf: install tor2 /sbin/modprobe --ignore-install tor2 && /sbin/ztcfg install torisa /sbin/modprobe --ignore-install torisa && /sbin/ztcfg install wcusb /sbin/modprobe --ignore-install wcusb && /sbin/ztcfg install wcfxo

Hello all, I am planning to setup a MeetMe conference functionality on Asterisk-1.4.13without having a Zaptel card. All users will be calling through SIP only. AFAIK, the said application needs a timer which makes use of the ztdummy module. I have basically two (2) problems I am encountering here that [1] I can't load the ztdummy.ko module and [2] Asterisk don't run when running it

Ok so I read the Linux 2.6 related README and finally compiled propperly, I thought but at the end I notice that lscpi does report the cards, but I cant modprobe wcfxo nor zaptel and I do have wcfxo.ko in the /lib/modules/2.6.8/extra/ directory, so what gives? This is a Debian Sarge, thanks! # # make clean starts here # make[1]: Entering directory `/usr/src/zaptel-1.4.0/menuselect' rm

Here's a weird problem that I'm not quite sure how to resolve. Zaptel 1.2.10 compiles just fine with "make", but when "make install" is run, this happens: [ `id -u` = 0 ] && /sbin/depmod -a 2.6.17-10-generic || : [ -f /etc/zaptel.conf ] || install -D -m 644 zaptel.conf.sample /etc/zaptel.conf build_tools/genmodconf linux26 "" "tor2 torisa wcusb

Hi, i can't compile the latest svn update from zaptel: /lib/modules/2.6.14-1.1653_FC4smp/build make -C /lib/modules/2.6.14-1.1653_FC4smp/build SUBDIRS=/usr/src/zaptel modules make[1]: Entering directory `/usr/src/kernels/2.6.14-1.1653_FC4-smp-i686' CC [M] /usr/src/zaptel/zaptel.o /usr/src/zaptel/zaptel.c:6193:5: warning: "CONFIG_ZAPATA_DEBUG" is not defined

Hi, I'm experiencing an issue with my x86_64 machine containing a Hauppauge PVR-500 (ivtv) and a Digium TDM400p (wctdm, part of zaptel) PCI cards. Independently of each other both cards work fine, but once the wctdm driver is loaded and mythtv tries to record something on the PVR-500 the wctdm driver freaks out. The error message is see is "TDM PCI Master abort" printed over and

Hi all, After reading great things about the OSLEC Echo Canceller (http://www.rowetel.com/ucasterisk/oslec) and seeing the reactions of people who have tried it on a recent Trixbox thread (http://www.trixbox.org/forums/trixbox-forums/open-discussion/need-people-echo-problems), it sounds like it is the "bees knees" for sorting out echo problems with cards like the x100p. Has anyone

Hello The Ubuntu Asterisk package doesn't install /etc/modprobe.d/dahdi.conf, so I was wondering where to put the following line: ======= options wctdm opermode=FRANCE ======= Should it be in /etc/dahdi/modules? ======= options wctdm opermode=FRANCE ======= Thank you.

After getting zaptel from the CVS server, compiling and installing it I type: modprobe zaptel and all is well. Then I type: modprobe wctdm and I get this: modprobe: Can't locate module wctdm Any idea why? I did this yesterday but with the CVS head of Asterisk and I got by this part without a problem. I reinstalled it all today because I wanted the stable release on our server since we

Hi, I've installed Asterisk with a TDM400P on a Debian Etch distro. When I reboot the server I get zaptel and wctdm automatically loaded. I'd like to avoid this behaviour. How can I disable this automatic "modprobe wctdm" during boot? Thanks Giorgio

Hello, What's wrong ? make install ..... options torisa base=0xd0000 alias char-major-196 torisa alias wcfxs wctdm alias wct2xxp wct4xxp if [ -d /etc/modutils ]; then \ /sbin/update-modules ; \ fi depmod: *** Unresolved symbols in /lib/modules/2.4.27-2-386/misc/wctdm24xxp.o depmod: *** Unresolved symbols in /lib/modules/2.4.27-2-386/misc/zaptel.o depmod: *** Unresolved symbols in

Hello Everybody, Since I upgraded to 1.4 I always get the difficulties as below, which I have never had in 1.2: [Dec 28 21:05:59] VERBOSE[1734] logger.c: -- Call accepted by 202.153.128.34 (format g729) [Dec 28 21:05:59] VERBOSE[1734] logger.c: -- Format for call is g729 [Dec 28 21:06:00] VERBOSE[1756] logger.c: -- IAX2/VoIPRakyat-2 is ringing [Dec 28 21:06:00] DEBUG[1756]

Hi all, I have installed a TDM22B on an IBM xSeries 220 with FedoraCore 3 and setup asterisk cvs head to work properly. A few days ago, I tried to update the system kernel to 2.6.12 from 2.6.9 and also to change to asterisk stable 1.0.9. After compiling zaptel and asterisk, i loaded zaptel and tried to load the wctdm module but this failed with the following message: Notice: Configuration file

Hello, I have found a "bug", I think in the way TDM400P cards handle FXO interface disconnect/re-connect problems. Normally I do keep all the wires connected from my CO / PABX quite securely, but I had a need to re-route the cable from one side of the desk to another, and I simply disconnected the RJ-45 connector and plugged it back in. THIS PROMPTLY RESULTED IN VERY VERY SCRATCHY AUDIO

Hi, I have a pentium 4 with Intel motherboard and one TDM400P (2 fxs, 2fxo) modprobe zaptel is Ok but When I execute modprobe wctdm never load the module, I can wait for 1 year but never response me (error or OK). I need to do ctrl+c Any idea? Edgardo >>> jan@irial.com 06/21/05 10:07 AM >>> i know that there are extensive rework on the transfer in SIP at the moment. --On

I have linux 2.6.5 running on my machine.I downloaded The latest version of Zaptel from the cvs repoistory.Compiled zaptel with the "make linux26" option. Installed it by modprobe which gave no errors.However when i did "modprobe wctdm" i got the following error. "FATAL: Module wctdm not found." I have no idea why it's happening.Tried Googling but got nothing.ANY

Hi, I've compiled Asterisk cvs stable (few days ago) unde Suse 9.2 without any problems. We're using te110p and wcte11xp module that is autoloaded by Suse 9.2. Card goes green after reboot, but this meesages appear in logs: Mar 22 11:28:51 linux kernel: Zapata Telephony Interface Registered on major 196 Mar 22 11:28:51 linux modprobe: FATAL: Error inserting torisa