similar to: Phantom problem authenticating IAX2 with RSA

Hi people, i have problem with IAX2 between two asterisk PBX. When i try call some number i get "INVAL" packet, but when i try call same number via OpenVPN (is between this two asterisk) call is working fine.So i debug communications and here is my opinion ... Schema of connection: Asterisk1 -> ADSL router with NAT -> INTERNET -> Asterisk2 A)Calling directly via public

I was wondering if anyone had seen this problem before and/or could offer any insight into what the trouble might be: I have an Asterisk machine that it set up as a mutual friend with another one (in another state... about 150ms away). Calls between the two fail to get established approximately 50% of the time. When a call works, everything is fine. When one fails, however, I see a large

Hi, My asterisk server is behind firewall and i am trying to connect to FWD. i hv configured as mentioned in this link http://www.freeworlddialup.com/advanced/iax. i am able to register my server with FWD. But when i dial 393612, i always get 'No one is available to answer this time, try again later'. I hv portforwarded tcp 4569 and 5060 from my firewall to my asterisk server. Any idea

Has there been any consideration of having asterisk save to a file the state of which agents are logged in such that after a restart (or crash) all agents don't have to manually re-login (after eventually realizing they're no longer logged in and not receiving calls :) ? ---------------------------------------------------------------------- Jon Lewis | I route Senior

I'm setting up a private enum zone to simplify/centralize dialplans for a number of Asterisk servers. In several dialed number situations, there are a handful of possible destinations for the call, and I'd like to have * try ENUMENTRY1, ENUMENTRY2, .., ENUMENTRYN just in case the first result is temporarily unable to handle the call. In at least some cases, I'd also like the order in

We've had a recurring issue on one of our servers where one or more zap channels from a PRI will get "stuck" causing incoming calls to fail. I happened to have a CLI session when it happened this morning. The start of the problem looked like: -- Channel 0/3, span 1 got hangup -- Channel 0/3, span 1 got hangup Jul 18 08:34:54 WARNING[20343]: chan_zap.c:7585 pri_dchannel: Ring

I have been having problems getting PrivacyManager to work correctly. Right now I am running the 1/21/05 CVS but I have been unable to get this to work on asterisk-stable either. You can see from the debug below that the inbound call is arriving via IAX2 and both the CALLING NUMBER and CALLING NAME are both set as "Unavailable". However, PrivacyManager executes and determines that

I downloaded iaxComm and get up my iax.conf file and the extensions.conf. Here is the out but from CLI in iax debug. What did I forget to do??? Rx-Frame Retry[No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ Timestamp: 00001ms SCall: 10489 DCall: 00000 [192.168.50.66:4569] USERNAME : 100 REFRESH : 300 Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type:

Okay, I've read as much as I can, and I think i've followed instructions, but I'm still having problems with * and firefly... I can get outgoing to other freshtel working, but not incoming (I get the "not available" voicemail), or outgoing to landline. I'm using the debian asterisk package (0.9.1-RC1-4) My iax.conf has in general (under my FWD register, which

Anyway, in my P.S. yesterday (the main post was on Codec problems), I described a situation where any IAX softphone was registering successfully, and then having zero sounds heard on either side of the call. Here is an "iax2 debug" output from a DIAX call to a local * server, dialing the extension that goes directly to the "demo" application. AsteriskHouse*CLI> iax2

Anyone had Realtime working with IAX2 and RSA authentication to connect two PBXs, please? It seems that inkeys/outkey fields are not read at all and the following warning is logged when dialing: Jun 2 02:41:36 WARNING[6299] chan_iax2.c: I don't know how to authenticate ******** to XXX.XXX.XXX.XXX Using iax.conf it perfectly works. Maybe a bug in Realtime? TIA, Alex

i have 2 asterisk servers one on CentOS and one on Fedora , i configured IAX trunking between the 2 servers so that i dial -say from a sip extension 2000 on fedora server to a sip extension 3000 on CentOS server the call seems to be established but hangup automatically after very short time and here is the iax2 set debug command result on centos server and also my iax.conf and extension.conf and

Hi, My termination with sixtel stopped working, is it something I did or anybody else is having the same problem. I am attaching log: *CLI> -- Executing GotoIf("SIP/300-fbe0", "1?4") in new stack -- Goto (macro-dialout-default,s,4) -- Executing GotoIf("SIP/300-fbe0", "1?6") in new stack -- Goto (macro-dialout-default,s,6) -- Executing

Hi, I'd like to setup oneway connection - so asteriskB can place calls on asteriskA and be safely authenticated with rsa keys. I just don't get any response on asteriskA. I've generated pair of keys: name.key, name.pub and put them on both servers - is it right to only have name.key on asteriskA and name.pub on asteriskB ? I get everybody is busy ... on asteriskB, and none

Hi all, I'm trying to get IAX2 trunking between two * boxes and am having extreme difficulty :) What happens is when the sending * server (the one initiating the call) receives the ACCEPT back from the receiving server it immediately replies with INVAL. I've checked the code and it seems to be not matching the accept packet with the relevant item in the iaxs array due to the following

I am having some problems getting TelIax service to work with *. Outbound calls work just fine. When I try an inbound call the phone rings and there is no audio. Upon further investigation "iax2 show channels" indicates that the codec is "unknown" The provider confirmed that they are set for ulaw and so am I. Does anyone have an idea what could be causing the codecs to

hi all, I am trunking via iax2 2 asterisk serverses if both of them have static ip addresses, I can connect them using no password, password or auth rsa with a pair of keys. If one of them has dynamic ip address and need to register on the other server, I can connect them with no password, but I am not able to do that using keys. The question is: which is the right register syntax to use when

[ Sorry, I incorrectly copied some Reference headers into this post and tacked it onto the wrong thread. -Steve ] So far, I have been able to receive incoming iaxtel calls via my assigned 1-700-xxx-xxxx number, but only when using md5 authentication in iax.conf: [iaxtel] type=user ; Incoming calls only context=incoming auth=md5 secret=<mysecret> ; Required for

Hi, Acording with http://www.voip-info.org/wiki-Asterisk+iax+rsa+auth, both sides should have "auth=rsa" in their respective section at iax.conf. But i've found that if server includes this option, the client keeps saying "No way to send secret to peer". My links with FWD and Iaxtel are working fine, this is a test i m doing with 2 asterisks i configured. Also, if i use

I just had a remote root break-in on my machine (x86 running Red Hat Linux 5.0 with all the updates except for kernel-2.0.32-3) this morning at 06:03:28 EDT. From what I''ve been able to gather, it appears to have been through snmpd, which I missed when I was weeding out unused daemons. Sorry for the feeble message, but all I know (or at least strongly suspect) is that there''s a