similar to: Sipura 3000 help

Can anybody show me a working Sipura 3000 setup please? I need to setup one to my * box, ... What are the variants you can setup? Advantage - disadvantage. bye Ronald Wiplinger

If I have multiple Sipura 3000 device how can I dial out properly? I can receive call without any problem and that's working really well. Caller ID is shown and when someone call he get's the welcome message the same way I have it configure with the X100P card. I don't seem to have any echo problem with the Sipura 3000 (but I do with X100P cards) My main concern is for

How can I dial *67 on a Sipura 3000 if I dial from a SIP phone connected on an asterisk server. I always get a message saying that authentication failed for INVITE for sip221@192.168.1.6. If I dial a number without doing *67 it's working fine... sip 221 being the extension of my Cisco phone and 192.168.1.6 being the IP of my asterisk server... I have my outgoing context configure

Anybody using a Sipura 3000 for FXO with Asterisk? Mine is working except for one small nit... When a call comes in from the PSTN, the Sipura answers it and then passes it on to Asterisk, which plays extension ring tone. I'd prefer for the POTS line to stay on-hook while the extension rings, and to only be answered by the Sipura when the extension answers. Has anybody made this work?

My apologies for the off-topic post ... No matter what settings I try, when I dial in to the SPA-3000 on the PSTN line, it picks up the call and immediately gives me a fast busy tone then hangs up. The info tab says under PSTN Line status: Last PSTN Disconnect Reason: PSTN Disconnect Tone which seems to indicate that the SPA thinks the caller has hung up. Since I am in Japan, it is possible

I have three Sipura 3000 FXO untis for incoming PSTN lines on a small pbx. There is an IVR to select the extension. The DTMF tones are not being sensed so the IVR does not work and incoming calls are not being answered. I have listed my sip.conf entries. Is there any solution to this? ;Sipura units [101] type=friend host=dynamic context=default secret=mysecret mailbox=101 dtmfmode=inband

I'm trying to get working a spa3000 with asterisk. My problem is I cant get wroking the incomming calls (I installed the lastest firmware). My problem is asterisk is rejecting the authentication from the spa3000. Asterisk answers forbidden (SIP/2.0 403 Forbidden) and I think I placed the username and password correctly... Sip.conf says this: [linea2] username=linea2 type=peer secret=1111

My SIP phones can dial out through Sipura SPA3k to POTS for local and 911 calls _but_ incoming POTS calls are being swallowup somehow. Am I on the right track with the code snippit below? sip.conf: --------- In sip.conf the following code is _supposed_ to ring the SIP phones when a POTS line call comes in through Sipuara to Asterisk. [spa3k-pstn-in] ; Pots-line-in from Sipura ; If

Anyone have one of these yet? http://www.voxilla.com/shop/index.php?action=item&id=38 -Dan

Folks! I discovered some serious problem with several Sipuras 3000 but I don't know if the problem is with them or Asterisk. Basically, if I call a Sipura PSTN line, when there is a call already in progress, generally I get a 503 Sevice Unavailable, but if I try hard enough, I am able to get through and connect to dialed number. The other call gets disconnected but the originator of the

Some people on this group may have understood from messages posted here that the Sipura SPA-2000 is not currently available for shipping. That is not the case. Voxilla.com has the Sipura SPA-2000 available for immediate shipping, and has had them since late November. The price is $109.95, and it comes with a month of free VoicePulse service with activation fees waived (a $65 value). In return

Froogle found me one supplier for the SPA-841, not sure I trust them though. Does this phone even exist yet? Does anyone have any experience with it? Does anyone know a vendor other than Atacomm/voipsupply?

Does anyone have a Sipura 3k running, and using the FXO? I've got things working right, but if I try to toss a *67 in the dialplan, it seems the sipura is throwing a 403 forbidden back. For example: exten => _91NXXNXXXXXX,3,Dial,SIP/sipura1pstn1/${EXTEN:1} works fine exten => _91NXXNXXXXXX,3,Dial,SIP/sipura1pstn1/*67${EXTEN:1} does not (even if I toss a couple Ws in) I can't

Voxilla news story: http://voxilla.com/voxstory84-nested-order0-threshold0.html Two new products * A Sipura 2000 in a linksys box: Linksys PAP2 Phone Adapter * A combination NAT router with 2 FXS ports: Linksys RT31P2 Broadband Router Jim James H. Thompson jht@lava.net

Hi, the topic says it all really. Does the Sipura 3000 detect and report UK clid correctly? thanks Mike

Problem: SPA3000 phone does not ring for incoming PSTN call although I can dial out. I set up my Sipura with the Voxilla Wizard which is pretty good but leaves out some important details. The Voxilla Wizard for Supura SPA3000 gave me a setting for PSTN Tab -> Dial Plans -> Dial Plan 8 (<S0:66610>) Should I put extension [66610] in sip.conf with a context in extensions.conf that

Hi I wonder whether anyone got the Sipura ata 3000 to decode British Telecoms callerid and pass it to asterisk? The userguide seems to suggest that this is not possible, is that right? Conrad

Does anybody out there have any evidence that Sipura support is still in operation? rgds benjk -- Sunrise Telephone Systems, 9F Shibuya Daikyo Bldg., 1-13-5 Shibuya, Tokyo, Japan. NB: Spam filters in place. Messages unrelated to the * mailing lists may get trashed.

Hi all, I was wondering whether anybody here would help me clarify this minor issue please. If I have the following setup; Asterisk ------ Sipura SPA 3000 (fxo) --------- Pstn Line Would a call coming in on the pstn line be answered by the ATA or just get passed through to the * server (depending on dialplan) to handle? So basically, the caller does

I have been trying to read everything I can find on Sipura 2000 and Asterisk. I am trying to make the Sipura-2000 act as two analog lines off my asterisk. I have followed (what I believe) the example on http://www.voxilla.com/Article39.phtml and I still can't get my Sipura to register with my Asterisk server. I can re-config my Sipura to talk to fwd, or voice-pulse connect and it works