similar to: Grandstream ATA Toasted

Hi people, I would like to read your suggestions as to where the issue might be. ATA286=Grandstream Budgetone ATA 286 in SIP mode. One Lan Port and one FXS port. TDM04B= 4 FXO signal fxls There is a 8FXO-to-SIP unit in this scenario that works perfectly so i will not make mention of it. PSTN----VOIPprovider---Internet---ATA286------tdm04b---Asterisk1.2.-13 Asterisk is being used as a meetme

Hello everybody, when I upgraded from RC1 to RC2 I didn't had any audio between my ATA286 and H323 EP (my post from 13/08/04) I checked further and discover that problem is with ATA286 who is unable to call. I always get an 404 error. Coming back to RC1 everything works fine again. I tried to modify my dtmfmode from rfc2833 to info but in change nothing. Local call to asterisk are

I'm considering a situation where I buy about twenty ATA devices. I've played with the Linksys / Cisco PAP2T, and got that working fine with some inbound and outbound faxing. The web GUI was okay. I'm seeing prices around $45 to $50 for this thing. It comes with two FXS ports, but I only need one FXS. I've seen the Grandstream Handytone 286 online. It looks promising as an

Somone in europe have had succes getting Callir ID showed on a phone screen conected to an Handytone 286 ? Adri? Vidal -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: text/enriched Size: 235 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20041124/e5514052/attachment.bin

Hi list, would like to know if some of you have tested asterisk connected to an EADS 6550 analogique PBX (also know as Nexpan50). Our set up is a Dell Optiplex with 1 TDM400 4 FXO, 1 TDM400 4 FXS, (no other card, each of them have their own IRQ) all ports connected to the EADS. We have GS ATA286 as EP. Calling from ATA to ATA give a perfect sound. Calling to PSTN numbers or reverse side,

was breezing over http://voxilla.com/ Looks like a new ATA from the founder of Komodo Technology (aka the Cisco 186) Sipura SPA 2000 http://www.sipura.com/products/spa2000.htm to join the others Cisco ATA 186/188 http://www.cisco.com/warp/public/cc/pd/as/180/186/ 8x8 DTA-310 http://www.8x8.com/products/home_office/dta-310/index.asp.html Grandstream HandyTone 286

Hello, I bought a Grandstream Handytone 486 to forward incoming calls from our old analogue PBX to the asterisk server. My first test was connecting an analogue phone to the Handytone and calling a sip phone - worked. Now I used the same cable to connect the line port of the Handytone to the analogue pbx. When I call the number of the analogue PBX I hear a clicking inside, but the call

I am trying to get the handytone 286 to make a very simple call to * and having problems. It registers with * just fine, but when I place a call (to echo test, for example), the RTP stream seems to have problems opening. Here is there error I get in *: WARNING[98311]: File chan_sip.c, Line 464 (retrans_pkt): Maximum retries exceeded on call 20d1c411-e210-5f3d-3f88-19035c8fcb26@192.168.2.6 for

I have running * without any Digium (or any other) hardware. Now I need to connect analog FAX machine to it. I think that cheapest and easiest way is to buy ATA. Please correct me if I'm wrong. Now, which ATA should I buy? Local dealer sells those four. I can buy something else (if there is any reason for it), but I prefer something of this. One more question, can I plug two lines in any of

Hi Has anyone opened up a grandstream phone or handytone ATA to find out what is inside? What is the CPU? How much RAM? Cheers Rob

Hi, Anybody here from the UK using Asterisk at home? I'm looking for a SIP phone which will work with Asterisk and not leave me broke! I got one of the Tecom ones from Solwise but it refuses to login to Asterisk server for some reason. May have to send it back. What are the other options please? Thanks Mike

Hi anyone know if i can connect a Grandstream HandyTone 488 to Asterisk ? Actually my HandyTone 488 are connected to: wan port to my lan line FXO port are connected to my local analogic line i want that when a call in by my analog line, it's sent to my asterisk for other voip post can answer .. it's possible ? thanks bye

I have an analog Fax machine which I wish to connect to the network and the Asterisk server. It will connect through a GS Handytone 286 converter and then into the LAN. Is there any information out there on what I need to write in *sip.conf* and/or *extensions.conf* to make sure the fax works as a fax? Channel 8 on my T1 is a reserved, dedicated line for the fax number. Do I need to

I have a Fedora Core 3 system at home, that was running fine, but now won't boot. Someone shut the power off on it without doing an orderly shutdown, and also I sometimes apply patches with "yum -y update" without doing a reboot immediately afterward - I suppose either of these could be related to my system not booting. I have a lot of information about the early stages of the

Hi- I am attempting to setup my Budgettone phone for use with my * server and am having problems obtaining an IP address. I have checked the phones settings to make sure it has dhcp enabled and it is. The display says no IP. I bought the phone but do not have any documentation other than the Wiki, but I am still at a loss. What could be preventing the phone from picking up an IP address? Any

Hi, Just received recently released Grandstream handytone 286 ATA for testing. I can call ATA from any other extensions and conversations seems to be of quite good quality. However placing calls from ATA is not possible at all to any extensions. After dialing there no indications of any kind from ATA at all. It just "hangs in there". ATA is behind NAT, registers to an * with public IP

can someone who has a grandstream handytone 488 working with making outgoing calls through the fxo port please post the parts of their config that deal with this port? i cant quite seem to get it to make outgoing calls despite having tried several completely different ways of making that happen. i have been told that asterisk@home has this built in to just a button hit, but i dont want to

Hi, I am quite new to asterisk so I am not sure what is needed to figure out this problem. If more information is needed and not provided I will gladly provide it. I have a very basic asterisk setup. 1 x100p card and a grandstream handytone 286. I can make calls fine to most phone numbers from the handytone device the trouble seems to come when I dial this number 591-1079. It puts me through to

hi, recently I installed zeroconf for asterisk... I've already followed the asterisk+zeroconf how to (which is too short), but it came with an error message... asterisk: relocation error: /usr/lib/asterisk/modules/res_zeroconf.so: undefined symbol: DNSServiceRegister Ouch ... error while writing audio data: : Broken pipe it's weird since I've double checked the library and header

Hi everybody, I'm new to this matter and I spent three days in trying to connect one SIP Softphone to an Asterisk Box. I always get error 401 or 403... I don't understand very well settings in Softphone program: con anybody show me how to set up a minimal running system with no public lines or external Proxies? Thank you for your kind help... Ciao Mauro