similar to: zaptel witch smp

Hi List, I am having some trouble with installing the latest version of ztdummy on a CentOS Kernel 2.6 system. I have installed a few Asterisk systems on Slackware Kernel 2.4.x without any issues, unfortunately there is no choice about this distro, or kernel as it has been preinstalled by someone else. And so I am in the dark with an unfamiliar distro and kernel. I am fairly sure the

I go to my Zaptel 1.4.0 folder and run ./configure; make linux26; make install and I don't see any errors. This is out of my modprobe.conf: install tor2 /sbin/modprobe --ignore-install tor2 && /sbin/ztcfg install torisa /sbin/modprobe --ignore-install torisa && /sbin/ztcfg install wcusb /sbin/modprobe --ignore-install wcusb && /sbin/ztcfg install wcfxo

/bin/sh: -c: line 0: syntax error near unexpected token `;' /bin/sh: -c: line 0: `if [ -n "" ]; then if [ -f ]; then mv -f .bak ; fi; cat .bak | grep -v "alias char-major-250" | grep -v "post-install torisa /sbin/ztcfg" | grep -v "post-install wcfxsusb /sbin/ztcfg" | grep -v "alias wctdm" | grep -v "post-install wctdm

When I'm connected with two clients in the same LAN of the asterisk server using the same codec and the IAX protocol, I have no media passing through the asterisk. But, when these clients are on the Internet, all the media flow pass through the asterisk server. Is that way that it works? I can't see what is the difference. Thank you and I'm so sorry for my poor english. Wendell

I installed Asterisk on Gentoo using emerge. At first, emerge tried installing version 0.9 but reading the wiki showed how to get the latest stable. I'm running Gentoo kernel 2.6.11-gentoo-r9. Asterisk seems to be working just fine, but I'm concerned that since I don't have any Digium hardware, I may need a timer source. When I executed emerge zaptel, it installed zaptel 1.0.7

Ok so I read the Linux 2.6 related README and finally compiled propperly, I thought but at the end I notice that lscpi does report the cards, but I cant modprobe wcfxo nor zaptel and I do have wcfxo.ko in the /lib/modules/2.6.8/extra/ directory, so what gives? This is a Debian Sarge, thanks! # # make clean starts here # make[1]: Entering directory `/usr/src/zaptel-1.4.0/menuselect' rm

I have this in my rsync.conf [backup] path = /home/$USER/backup use chroot = no monge symlinks = no uid = wendell gid = wendell read only = no list = yes auth users = wendell secrets file = /etc/rsyncd.secrets But rsync doesn't seem to interpret the $USER. I've also tried this with $HOME and '~' with no luck. I want to be able to back up to the

I have a X100P and a TE110P in my Asterisk box. I can either get the X100P or the TE110P to work, but never both. Here's my zaptel.conf span=1,0,0,d4,ami e&m=1-24 fxsls=25 When I load wcte11xp and wcfxo, I will get this error. [root at asterix etc]# modprobe wcte11xp ZT_CHANCONFIG failed on channel 25: No such device or address (6) /lib/modules/2.4.20-8/misc/wcte11xp.o: post-install

Thanks a million to Wendell Wilson, who offered a solution to the problem we've been seeing regarding saving a document in MS Word. I know we really do need to upgrade to at least 2.2.6, and I am planning it - but this gives us little more breathing room with everything else going on. Once again, appreciate your help! --Gene Original Question: At 04:35 PM 11/14/2002 -0800, I wrote:

Hi, I got my TDM11B and am trying to get it to work on my PC. However, I'm having difficulty getting the wcfxs driver to load. I've Googled this problem, and while there are others who have ran into the same problem, none of the solutions work for me. I would very much appreciate it if you could suggest things I could try to resolve this problem. Details follow. The PC is somewhat

Hello! I discovered, that I'm unable to load ther kernel module under 2.4.28. Before that I had 2.4.26 and tryed to upgrade the kernel to 2.4.28. After restart (reboot - soft restart) I can't load the module. When I go back to 2.4.26 and try to load the module, I'm getting the same problem. Only turning off/on helps. What can I do? It's very annoying because the box is in hosting

I hope this is just one of those issues where just after hitting the send button I figure out what is wrong. Client is 3.0.4 (also tried with 3.0.3) and server is windows 2003 with all patches as of today applied via windows update. Short summary: wbinfo -u doesn't work and wbinfo -g lists just a BUILTIN domain. I have done this lots of times, but now winbind seems to be not working anymore.

Hmm, I don't have /etc/modprobe.conf, and wctdm is giving me problems. Which device is it talking about? [root@asterix /]# modprobe wctdm /lib/modules/2.4.20-8/misc/wctdm.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg

I can either get the TE100P working or the 3 X100P clones working, but never both. I have the TE100P connected to a channel bank, and X100P clones to lines from the phone company. This is my zaptel.conf span=1,1,0,d4,ami fxsks=1-24 loadzone=us fxols=25-27 loadzone=us I then do [root@asterix root]# modprobe zaptel [root@asterix root]# modprobe wcte11xp ZT_CHANCONFIG failed on channel

I have a E110P which I can't seem to make function and i think it has something to do with interrupts, but I've never had to deal with them before and was wondering if someone could offer some guidance. a modprope zaptel loads fine. when i then do modprobe wcte11xp i get the following: /lib/modules/2.4.21-27.0.1.EL/misc/wcte11xp.o: init_module: No such device Hint: insmod errors can be

Hi folks, I've already searched the mailing list but no one else seems to have my same problem. I'm using Asterisk with the following configuration: Fedora Core 4 (but I also tried Fedora 3) 1 Digium TE110P 1 TDM40B 1 HFC-S 'Cologne' bristuff 0.2.0-RC8o (zaptel 1.0.9.2) I compiled right, I can load kernel modules but when I try to unload wcte11xp module (the one

Hello! I sent this message to samba-technical yesterday but as I saw no response (not even a RTFM ;), I'm crossposting. I just need some help to track down this bug. I can write a patch if I can find the guilt... ----- Forwarded message from "Luis Claudio R. Goncalves" <lclaudio@conectiva.com.br> ----- Date: Thu, 29 Nov 2001 12:34:41 -0200 From: "Luis Claudio R.

Hi I'm trying to get a Digium TE110P card working but as soon as I load the module with modprobe wcte11xp the sound stops working for incoming calls (SIP and IAX). I haven't even started to configure the card. Running ztcfg and restarting asterisk doesn't help. After unloading with rmmod wcte11xp the sound comes back for new calls I'm using asterisk 1.2.4, libpri 1.2.2 and

This is a system for our lab. I have no problem getting rid of X100P clones. But I am just curious why can they work. Even the drivers are not loading correctly. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kerry Garrison Sent: Tuesday, May 02, 2006 10:51 AM To: 'Asterisk Users Mailing List -

Hi, I have problem using Asterisk.I have isdn-pri and openvox d110p card in my computer.They are connected with RJ-45 (1,2,4,5 pins to the card and all pins to the isdn done by telco workers). I got green led on isdn which is sign that isdn is working and that is connected to openvox, right ? I compiled newest versions of libpri zaptel and asterisk and had no problems during that. When I started