similar to: Need Help with pickup *8

Hi 1- Anybody implement mgcp useragent in *. 2- Where can i get that. 3- if no then anybody can help me to write it down. Best Regards Ibrar Ahmed Project Manager. Comcept (Pvt) Ltd. Islamabad Pakistan www.com-cept.com ibrarahmed@com-cept.com abrar_@yahoo.com Ph # (Off) +92-51-111784784 Ph # (Res) +92-51-2271283 Ph # (Mob) +92-3009543001 Fax # 92-51-111784785 www.com-cept.com Pick battles that

Hello, I have configured my TDM01B Card (1 FXO Port ) as follows (below) but it will not pick up an incoming call. Any suggestions/tools to see what the problem is? I have looked at zttool where this line changes but I don't understand what it means (The last digit changed from 0 to 1) Total/Conf/Act: 4/ 1/ 1 /etc/zaptel.conf fxsks=4 loadzone=nl defaultzone=nl

I have just joined the list and I have a problem, perhaps someone can help. I have: Linux 7.0 with 2.4.7 Kernel (with various upgrades for functionality). Samba is running on this machine with shares and a printer on the USB port. This machine also has a modem (demand dialling) and I am using the Monmotha Firewall script. This works quite well for the WinME PC able to access the printer and

Hello, I am having a little problem with executing logon scripts on Win95 clients, logging into Samba Netlogon service. When a user logges in, a MS-DOS prompt shows up and quicky disappears. Then I get "Please Wait While your logon script executes". It hangs at that point. A user has to hit cancel to start his win95 session. I have done the logon script in MS-DOS editor. I have the

Just a quick note for a few new features/fixes available on the Mongrel pre-release and a new document that covers nearly all the big features and configurations for Mongrel. First, the document is http://mongrel.rubyforge.org/docs/howto.html and it covers: * All the start command options including the fresh -G option to generate a config for -C. * The format and usage of the MIME type file (-m

I just saved some files to my smb server and ended up with a bunch of little 1k files with weird names (when viewed from windows) all "CAPLETTERS~X" 'cept capletters is 6 long... so all are 8 long...on the linux side, they are all the same as the file's I downloaded with ":Zone.Identifier" appended to the name. I'm pretty sure I don't remember seeing these

If you haven't been to samba.org in the last few hours, it's time to take a look. Much has changed. The Samba website has been completely redesigned and updated. This version of the Samba website has a striking new look and features XHTML markup and a CSS-controlled layout. In addition to these changes to samba.org, the Samba Team is pleased to announce the creation of news.samba.org,

Hi, If you open a word document on a Windows 7 PC on a samba share and attempt to save it (or ppt, etc) it will fail (SMB2 enabled). Go back to 3.5.10, it works fine (SMB2 removed obviously). Not sure if anyone has seen this but FYI. Happens with Office 2007 & 2010. Justin.

Hi, Here's my problem: Samba-2.2.x (even 2.2.7) compiled right out of the box on HP/UX 11.00 gives some errors in the log file: Nov 23 16:17:32 pandora smbd[6744]: [2002/11/23 16:17:32, 0] locking/posix.c:posix_fcntl_lock(661) Nov 23 16:17:32 pandora smbd[6744]: posix_fcntl_lock: WARNING: lock request at offset 0, length 9223372036854779000 returned Nov 23 16:17:32 pandora smbd[6744]:

I cant really seem to find a definite answer: there's a bunch of stuff written on the subject, but nothing definite. "I've got it half way working" seems to be all I can find. So, has anyone gotten it working fully? I'd love to be able to run this without having to install windows... that would be a pain having to reformat etc etc etc... thx

It would be nice if Digium updated the hardware compatibility list on asteriskpbx.org to indicate that the LineJACK can't be used for dialing out. I've seen several people on IRC be burned by not knowing this. --Eric -- BTEL Consulting 850-484-4535 x2111 (Office) 504-595-3916 x2111 (Experimental) 877-552-0838 (Backup Phone)

Why doesn''t the yum provider support version, I tried added ensure -> ''ver'' and it barfs up (on clients) with: <snip> err: //stan.gbuild.org/any-host/java/Package[j2sdk]/ensure: change from 1.4.2_12-fcs to 1.4.2_13-fcs failed: Package provider yum does not support specifying versions at /etc/puppet/manifests/classes/ java.pp:13 </snip>

Anyone have the 7970 xml config for sip yet? Aaron

For a future release of Portable OpenSSH, it would be nice to have a ./configure option to enable the binaries produced, to be statically linked. I tried using LDFLAGS option to ./configure .... but this passes arguments to gcc not ld, this should be documented. Additionally, I feel that ./configure should --extra-inc=dir and --extra-lib=dir to add paths to compile (-I) and link lines (-L &

Ugh. We thought we'd fixed some problems by using regexten and DUNDi. Guess not. We have a configuration with three Asterisk boxes. Phones register with a single, primary asterisk box under normal conditions. For voicemail deposit, retrieval, we trunk the calls over to our asterisk voicemail server. However, the voicemail server now has no knowledge of the location details of the phones,

-----BEGIN PGP SIGNED MESSAGE----- Hi everyone - Someone I''m working with has a requirement to map ethernet card addresses to unique IP addresses, and then have a Linux IP masquerade server know of this mapping list and not allow any data to pass from any ethernet card that a) it doesn''t know about, or b) isn''t assigned the right IP. Ideally it would also log this

Hi, at the moment we have in Avaya Integral PBX with german pri (30 lines). We want to smouthly migrate to an Asterisk server. For this reason: Is it possible to route the external german pri (E1) through Asterisk server to that Avaya PBX? I think at first we need a Digium e1 card 4-Port. But how do we have to configure the routing of the whole PRI? I really would appreciate any sample

(this time with subject....) Hello, I?m trying to get Asterisk to accept incoming calls from budgetphone.nl. When I dial my budgetphone nr on a PSTN KPN line it immediately gives a busy tone. I tried X-lite, which worked perfect, so my modem (with nat) probably is not the problem. I did a sip debug and got the following output. Because I?m new to Asterisk I can?t get the error why this is not

I''m new to Ruby, so don''t be too hard on me. Is there a great visual editor for Ruby? Also can Ruby on Rails (RoR) work with any other databases other than the ones listed in the documentation, I need to connect to SQLBase? Can Ruby be used to create standalone Applications (like Java)? If yes, does it create native looking apps? Can it be use in Client-Side and/or Server

I have downloaded R-2.3.0.tar.gz for Linux 64 bit processor 1. Untar tar -zxvf R-2.3.0.tar.gz 2. changed the directory to the newly created directory R-2.3.0 3. Typed ./configure 4. Typed make 5. Copied the Script File R from directory R-2.3.0/bin/R to /usr/local/bin/R. 6. Typed R Fatal error: unable to open the base package I get the error message. Please advice [[alternative HTML version