similar to: Asterisk@Home connecting through firewall/router

Okay, first a little background - I've been with Packet8 since a month after they started. I found that we were outgrowing their services and decided to move to an asterisk box in the office. I found a service provider that offered me a reasonable rate. After a fair ammount of testing I decided to stick with their services and port my 3 primary DID's from Packet8 to the new service.

I have a TDM02B to bring in two POTS lines for my incoming calls; I need to point each line to a different IVR... is there somewhere that can I can look to get this setup working? Basically, each line is for a different business. I know that for a DID the routing is simple but I'm not seeing where I can match up a DID with a Zap channel. I'm currently looking into the zapata.conf file

Here's something I haven't been able to discover as of yet - I need to set up a "direct link" from my Asterisk box to an external line... basically I need to be able to pick up an internal extension and have it call a local phone number. This is call forwarding, I know - the question that I have is how do I set it up so that the extension always forwards. There will never be a

Hi, I have a couple of questions about MeetMe and call queues. I'm still pretty new to Asterisk, but already having to write a Service Center call manager for it (which I might add, our director has agreed to make open source!). MeetMe: How can I get MeetMe (does it even do this) to ask the user to speak their name first, and play that as the new member announcement. It seems

Hi, FYI, Red Hat released an advisory today about a vulnerability in Ruby. So far it doesn't appear in the VuXML, but am I correct in presuming it will soon? https://rhn.redhat.com/errata/RHSA-2006-0604.html http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2006-3694 cheers, -- Joel Hatton -- Infrastructure Manager | Hotline: +61 7 3365 4417 AusCERT - Australia's national

Hi, I'm planning to get my Asterisk box out of the LAN, get rid of my router and make the box acts as a Router, Firewall, DHCP Server (with Shorewall). I'll do that to be able to use some SIP clients remotely. Does anyone doing the same with the Asterisk box, is it a good idea, is there any other solution for the SIP emote Clients. Regards. __________________________________

Hi, On behalf of one of our users, I installed R 1.8.1 on HP-UX11.0 by compiling the source using the gnu compilers and all was fine with make check On 1.9.0, I get an error from 'make check' when running reg-tests-1.R which gives error exit code 1. Commands used are: ./configure --prefix=/apps/global/Gnu_R/R-1.9.0 --with-x R_BROWSER=mozilla (all on one line, of course) make make

Dear All, I'm trying to draw a TeX histogram with the following pair of commands, pictex(file = "realhisto.tex") hist(Peaklist$V3,xlab="Height $z/\\ut{mm}$",ylab="Probability density $\\phi{}(z-z_0)/(1/\\ut{mm})$") However, in the resulting file realhisto.tex, I get, for example \put {Height \$z/\ut\{mm\}\$} [lB] <0.00pt,0.00pt> at 136.13 9.17 when

Hi all, I have situation in that we are renting out a room in our office building to another company, including the provision of phone lines via our Aterisk box. To keep billing simple, we would like them to be billed separately for all their calls. We think we can achieve this by them leasing their own outbound IAX trunk (which our providers have said is no problem) and having all their

Hi, I'm having trouble getting an answer to the following problem on -questions - I hope someone here has done something similar and can help. I'd like to compile support for FreeBSD OPIE into sshd. Presently I have to use PAM to achieve one-time password support. On a 4.x system I have in /etc/ssh/sshd_config ChallengeResponseAuthentication yes and in /etc/pam.conf sshd auth

I'm looking for somehting like the standard house hold linksys/dlink router. Basically it needs to have at least 1x100mbit port, wireless G capabilitys and at least 1 x anolog voip/sip connection. I've found linksys's WRT54GP2 which appears to do what i want. Anybody use this? Does it require vontage's service? I'm looking for any recommendations. Thanks -- ~Shaun

Hello, I am using wireless N on a DLink-655 wireless router. It is the "A" hardware version with the latest firmware. I am using a channel that no one in my vicinity is using, according to iwlist. I checked the Statistics from the router web interface and they are shown below for a period of less than an hour. It looks like the errors are excessive, especially the "RX Packets

Hey all, A while ago today I posted about not being able to get my two interface setup working with a router (di 652 wireless/wired). I recieved help from Tom and got everything in the router turned off and set it up as a switch rather then a rouiter, this still never corrected my problems. Use tcpdump I see there is alot of traffic, but as soon as I dhcpcd eth1 (local) I loose all outside access

Found this today: D-Link has apparently positioned itself to challenge the AVM Fritz!Box (which is an analog & ISDN home PBX including DSL modem, router, LAN & WLAN). The PBX service of this device called "HorstBox Professional" DVA- G3342SB will be provided by Asterisk, and it should become available sometime around Q2/2006 for aprox. 450 EUR (let me add that this is twice as

Ok here's the deal. I set up Icecast and Oddcast, got them to communicate properly, but cannot access the live audio remotely. On other computers in the LAN it works perfetly. Currently I operate wirelessly behind a D-Link 514 router (a mite outdated by now, yes?) and have opened all necessary ports, turned my firewalls off, set this computer as a DMZ, pretty much everything I can think of -

Does anyone know if this unit works with Asterisk? Thx. B.

Hi, I have a dlink dvg-1120M (mgcp) box that i will like to use with asterisk. Is it possible? has anyone done that? Here's a link to the product page at dlink. http://support.dlink.com/products/view.asp?productid=DVG%2D1120M Also, does anyone has or know where to get the firmware for Dlink DVG-1120S (sip model)? thanks. -- Zahid

Thank all for fast help in my question. Anybody use DLINK 570 TX with 4 ports ? It was developed to NT, Does it work with Linux? Thanks Gilberto Braz

Am 05.07.2015 um 21:13 schrieb Steven Tardy: > What is the upstream switch? If it is a Cisco switch does the configuration > have `spanning-tree portfast` enabled? > http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/10553-12.html > _______________________________________________ > CentOS mailing list > CentOS at centos.org >

I have a DG-104S (which I reset to factory settings, it's DHCP'ing off my network, plugged into the WAN port). The system comes up, and I through the web browser set under Call Agent IP Address to: Notify Entry: dlinkgw@[192.168.1.1]:2427 (192.168.1.1 is the * server) I have RGW Name: and DNS IP addres the DNS IP of the MGCP box and DNS State disabled (not sure what to set it to) --