similar to: GXP-2000 Wiki update..

Guys. I just downloaded the recent firmware for GS GXP 2000 and I must say the phone works great but... How do you make the conf button work?????? Anybody done that? Also, with great dissapointment I must ask, where is ILBC support? GS web page mentions it and the manual says it supports it almost using bolds :) soooooo where is it???? Any light on this?

Greetings all I was wondering if any of you have found this problem. I have a setup with 80 GXP-2000s which work great until I decide to stop now my asterisk server. When it comes back up half of the phones (not always the same ones) fail to register with Asterisk. I set up the phones to register and send keep alives (register every 4 minutes, send keep alives every 20 seconds) to no avail.

Well, I wake up this morning, and aussievoip isn't up. I ring godaddy, who _were_ hosting it, and they say that the machine's been compromised, and you can't have your data. Nyah Nyah. I spent 1 hour and 38 minutes on the phone to them, trying to convince them to let me somehow get access to it, but to no avail. I've reported it to the Australian Federal Police High-Tech Crime

I have about 30 GXP-2000 phones running 1.0.1.9 which have all been configured using the provisioning feature so the configuration is all identical. The problem I am having is that they randomly seem to stop registering with asterisk. When they stop registering they can still make calls but oviously asterisk cannot ring the phone so all incoming calls go to voicemail. Has anyone else had similar

I have upgraded the GXP-2000 to the newest firmware 1.0.1.12<http://1.0.1.12>and the phone is much more usable However, I still have two slight sound quality issues: 1) There is static on the line at all times. It is not that noticable to me, but when I make calls out the PSTN the person on the other end hears it. If I use a Cisco ATA with an analog phone and call the same person again

Is anyone else having an issue with GXP-2000s and transmit gain? All my other phones are fine on my TDM400P with txgain set at 0, but the GXP-2000 caps at about a third of the scale in ztmonitor. I'm getting people complaining they can't hear me on my GXP-2000s, whereas my Snom 320 and Polycom 301 are great, and my Budgetones are overmodulating. Is there any conceivable fix on the

I started out a few years ago with some SPA-841 sets, because the Grandstream 2000 I thought I wanted was perpetually delayed. The GS had more call appearances, and I didn't want just the 4 max that the SPA offered. As it turns out, with the greater flexibility of VOIP, I don't need 'dedicated' CAs the way I needed them on ISDN previously, so 4 is actually adequate. Along the line,

Hi When I make a call with the Grandstream GXP-2000 through Asterisk (and SER) to landline using VSP, after I hang up the call the other party are still connected for another 30-40 seconds. I've notice that the SIP BYE is sent to Asterisk, but Asterisk sends no SIP BYE on to VSP. When I use the SPA-941 the call terminates on the other right away soon as I hang up. I have updated the

>From the usual place, http://www.grandstream.com/BETATEST/GXP2000/ Note, there are two (and it took me a bit of a while to figure out) images to be loaded. Copy the ...a.bin's and the .bin's to your http provisioning directory, and reboot. The phone _must_ load the .bin files before it understands the ..a.bin files. After it loads the first one, the phone does lock up with the

Hi People, We use the Grandstream GXP-2000 phones, firmware 1.1.1.14, Asterisk PBX, Slackware Linux 10.2, loaded on a Intel(R) Pentium(R) 4 CPU 2.66GHz Box... The issues that we are experiencing involves our Telephone Operator's/Receptionist whom answer multiple incoming calls... As an example.., when they answer line 1 and Line 2 starts to ring they would ask the person on line 1 to

I'm using a few GXP-2000 with firmware 1.0.2.13 and everything seems to be working fine. However, there are a couple of issues I'd like to know if are possible: 1) Even though the phone has 4 line appearances, if I am speaking on a line, the phone can no longer receive phone calls. I can manually select another line and make calls, but when Asterisk tries to send a call to it, I

I have had 2 GXP-2000 for a while now and been slowly following the firmware releases made by Grandstream and am now up to 1.1.0.13. This version works really well on these 2 original phones (MAC's 00:0B:82:06:xx:xx), so I went ahead and ordered another 2 phones (MAC's 00:0B:82:09:xx:xx). One of these I upgraded to 1.1.0.13 (it came with 1.1.0.5) and pressed it into use. The Speaker

Hello, At a client site yesterday I installed a dozen GrandStream GXP-2000's with 1.1.0.13 firmware but I had to backtrack and reactivate the old PBX and phones: network access for users windoze PC's through the phone's switch port was unbearably slow, making it almost impossible to work. When plugging back PC's directly to the LAN speed was normal again. On my test setup

I have a client with about 16 GXP-2000. They complain that the audio quality is terrible after 2 or 3 simultaneous conversations. They are behind DSL 1.5Mbps down and 256Kbps up. Because they are using G711.u codec, I know they upstream bandwidth is the limiting factor and they most likely won't be able to have more than 3 simultaneous conversations, and if they're surfing the

Hi, i got my Grandstream GXP-2000 phone today and want to configure it with TFTP. I downloaded the firmware 1.1.0.13 and put it into my tftp-server directory. Then I downloaded the template from: http://www.grandstream.com/DOWNLOAD/Configuration_Tool/Linux_Unix/Grandstream_Configuration_File_Template_1.0.6.x.txt renamed it to cfg<mac-address> Did the configuration in the new file and

Hi, I have Grandstream GXP-2000 connected to Asterisk, and Asterisk has trunk to VSP for PSTN calls. When ever I place local PSTN call, the landline doesn't hang up right away (40 sec), when I hang up the GXP-2000. The GXP-2000 seems to have problems making international calls as well. Where it hangs up soon as the other party picks up. I have used different IP phones, VSP's and etc.

Hi all Slightly OT but I know a lot of GS experts hang out here - I just upgraded a GXP-2000 to firmware 1.0.1.13 to try out the BLF functionality with Asterisk (which so far works as expected), but as a side-effect the phone won't sync with an NTP server - I've tried different server names (time.nist.gov and pool.ntp.org) and IPs in the config, but it refuses to update the time on

I have 5 GXP 2000's with firmware 1.1.4.25 running with Asterisk 1.4.13. Is anyone else getting the following error in the asterisk console: [Oct 22 11:39:01] WARNING[7100]: rtp.c:1142 ast_rtp_read: RTP Read too short every couple of seconds when a handset is in a call? I didn't notice this happening when I was using an older GXP2000 with the same firmware (doesn't mean that it

Does anyone know the secret to get the GXP-2000 Message waiting lamp to illuminate? Or can point me toward some docs that might explain it? Thanks! --Jeffrey -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060501/7ffc668f/attachment.htm

I have a client with 20 GXP-2000s. Everything seems to be working fine. However, after a couple of weeks of use, the client is having a hard time adjusting to the new IP based phone systems and only misses one feature from their old Lucent system. That is, they had 8 analog lines before and all their old Lucent phones showed a button for each line. So, it was easy for anyone to say,