similar to: Xlite not communicating with Asterisk

If your phones are setup to connect to the asterisk box by name, then a smart DNS server can just point phones to the backup box after failure. However, since asterisk running on the backup box doesn't know about the phones, this is only half the solution ________________________________ From: Mohamed A. Gombolaty [mailto:mgombolaty@noorgroup.net] Sent: Thursday, June 30, 2005 8:30 AM To:

Hi, I'm looking for a reliable provider to use mainly for outgoing calls in the UK, incoming isn't so much of a worry as I think I'm going to accept them over ISDN. Cheers! Steve -- Steve Foy steve@narnian.org

Dear All, I am trying to make the phones always talk to each other (peer to peer) using SER as a sip proxy, and incase the call is not answered we will use the voicemail of asterisk and other feautures, I have done that already, but in order to do so I found that I have to make the users dial different exten numbers, here is an example: user with exten 666 wants to call 999 . 666 dials 1999 and

Dear All, I was trying to enable call forwarding, following the steps of the link on voip.org regarding this issue it doesn't work and the phone I am trying to implement on is still ringing. below is my conf in extensions.conf and the CLI output during the process. My configuration is : exten => _*5X.,1,DBput(CF/${CALLERIDNUM}=${EXTEN:2}) exten => _*5X.,2,Hangup exten =>

Questions: Does anyone have a really STABLE asterisk system running about one year without need to restart the service or the SERVER ? Does anyone have a production Call Centre saled that don't lockup and is stable for 6 months ? I'm asking this questions because we have choose Asterisk for our call centre solution but, since the bugtracker only grows and people still want to stuck more

Hi, I've got an Asterisk box with grandstream and xlite clients on it. No here's the thing: - I grey out all the codecs on the Xlite except for GSM - I call the Grandstream from the Xlite, the Xlite uses the GSM codec and the Grandstream uses ulaw, with Asterisk doing the conversion, everything fine - I call the Xlite from the Grandstrea, the Xlite ends up using the ulaw codec as

I have a bunch of road warriors who I've set up with Xlite clients. Unfortunately the sound quality has been intermittent at best. Sometimes it's great other times completely unusable. When it's bad one usually hears harsh static when the other party speaks or their voice gets "clipped" to static if they speak too loudly. Many of these users have migrated to Skype ? much

Hi, I'm wondering if anyone has experienced an issue with the XLite softphone and asterisk accepting dtmf? I can listen to my voicemail perfectly from my hardphone. However when I dial the voicemail number from my XLite softphone and enter the password at the voicemail prompt, an error appears vm-incorrect and I get an "Unable to read password" message on the asterisk console. Has

Lets presume that my both software are open. Xlute and Eyebeam But I want my calls from Asterisk to land only on Eyebeam and Not on xlite. How to set it ? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090129/4011be6c/attachment.htm

Dear all, I have tried to run an asterisk instance together with XLite on a single machine (a PowerBook). The intent is to take advantage of IAX connections to easily cross NATs while traveling. While the IAX setup proved 'easy', just having to fiddle a little with working configs at both sides, I did not succeed so far in getting XLite to connect to the local Asterisk server, AND be

What's the secret to getting sound through Xlite? The SIP messages all look OK to me, but the sound isn't coming through. It was trying to use GSM, so I searched the archive and tried: disallow=gsm allow=ulaw Now it says that it's using ULAW but I still get no sound in either direction. Phil Skuse (MBJEJPIEUI) <phil.skuse@vicorp.com>

hi all, was wondering if someone could assist with a slight problem i'm having. I have asterisk setup with extensions 101 to 109 and am using xlite, grandstream budgetone, polycom ip500 and a couple of other phones. the problem is: 1. only the xlite extension (107) can receive calls. 2. all extensions can dial into voicemail and get mwi when msgs are received. 3. when dialing a non-xlite

Has anyone managed to get these two phones to make a video call to each other ? If so, care to share how the hell you managed ? the GXV is at the latest firmware, and xlite the latest download Asterisk 1.4 trunk TIA Julian

I am using the latest xlite phone to connect to the latest version of asterisk (20040727). When I try to make a call the xlite phone tells me "Call not approved". I used the configuration options that were listed on the wiki. The context in the sip.conf file is "from-sip". I have a matching context listed in the extensions.conf file. The phone is able to register

I have Asterisk configured and can place calls from XLite. But when I call my Asterisk box and try the extension where I'm logged in via my XLite, it doesnt ring and goes immediately to vm. I'm using AMP. Any ideas?

Hi, I installed asterisk server in my linux box. I configured a user 1000 using xlite and registered with asterisk server in the same linux box. I configured one more user 1001 in other box and this user also got registered with asterisk. But i am facing two issues here. 1. When a call is made from 1001 to 1000 i could see an incoming call blinking but no audio flow is observed. 2. When i made a

Hi, I have an Asterisk box behind a NAT address and also a Xlite 4 soft phone behind a different NAT network. Asterisk -> Nat -> Internet -> Nat -> Softphone. I can register my softphone to the asterisk box ok via SIP but the RTP stream from the asterisk box is addressed to the private non-routeable address of the softphone when I turn on rtp debuging. How can I configure the rtp

-- Attempting native bridge of SIP/1009-3df0 and SIP/101-f8f1 -- Attempting native bridge of SIP/1009-3df0 and SIP/101-f8f1 RFC3389: 5 bytes, level 0... Aug 27 08:32:16 NOTICE[23572]: rtp.c:289 process_rfc3389: RFC3389 support incomplete. Turn off on client if possible Killed Whenever I make a call between extension 101 and 1009 which are both Xten Xlite SIP clients, I get that error and

Hi there, I have tried very hard to setup the x-lite with asterisk, but until now i didn't get sucess. When i start the asterisk in debug mode, i see the message: sip/2.0 401 unauthorized. I know that this problem with authentication. I put in my sip.conf as below. [2203] type=friend username=2203 auth=md5 secret=1234 reinvite=no canreinvite=no dissallow=all allow=gsm

I am having a one way audio issue with xlite clients behind NAT. They can connect to the server and make calls but no audio is heard on the other end. my sip conf [general] context=default bindport=5060 bindaddr=0.0.0.0 srvlookup=yes canreinvite=no[tomfmason] type=friend secret=secret callerid="Thomas Johnson" <XXXX> host=dynamic nat=yes canreinvite=no disallow=all allow=gsm