similar to: Asterisk to Avaya PBX using TDM cards

Has anyone successfully setup the Avaya IPOffice 500 with a sip trunk to Asterisk. If so can someone give some config examples? Thanks Rick -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070825/50bd7d63/attachment.htm

Hi List, I would like create a H323 trunk from Avaya IPOFFICE to Asterisk, but i would like activate a "direct media path" for the RTP transit directly between the phone and the Asterisk. Now, - H323 Trunk is OK - RTP from the phone transit directly to Asterisk (activate "strictrtp=no" in rtp.conf, and "Allow Direct Media Path" option in Avaya Ipoffice) H323: Phone

Ok, to review, I'm trying to get Avaya 9608G to come up in a pure Asterisk environment-- no Avaya SBC or gateway or any other Avaya gear in sight. I have the phone working to the point where it boots up properly, then displays a Username and Password prompt, and says its extension is 123 and the time is 4:57p, which is wrong. But please don't tell me the only way to program up each

Hi list! I have a little question about groups and Asterisk ... is there anyone out there that can say if Asterisk can do any of this; We have a customer that want call handling we cant give him with a traditional PBX, and I'm running Asterisk @home so I thought I could give it a try ... The customer wants that incoming call should go to one group with some phones in it, if the group is

Hi * Users, I ran into a problem when I was trying to communicate an avaya IP Office talk to asterisk with SIP Trunking. I had successful calls from asterisk to Avaya but not from avaya to asterisk. Can someone provide me insight on how to address it or the path to resolve it. The error I get is mentioned below: (dialing 32564 from avaya to asterisk) "[Nov 6 17:14:23] WARNING[6227]:

Anyone have an H.323 trunk tied between their Avaya and Asterisk box that works? I am having some issues trying to get the two systems to connect. I am using the ooh323 channel to try to make the connection between the two system. I have all my configs if anyone would like to look over them. If I do a trace on Avaya I get a denial event 1191: Network Failure. Thanks! -------------- next part

Hi Everyone We would like to connect our Splicecom Maximiser PBX to our Asterisk box via H323 so that we can send our US calls via a low cost carrier (e.g. Broadvoice). Has anyone managed to do this in the past (I remember seeing some companies also worked with this system in the UK). The Maximiser only speaks H323 (not SIP) and can act as an H323 Gatekeeper, so in theory we should just be

I would like to connect a Legacy PBX (Avaya IP Office 406) to an Asterisk Server. The Avaya has 3 CO Ports available. I thought buying a TDM30B card with 3 FXS ports to connect the * to the Avaya CO Ports. Is this the right approach? Does any one have experience with such a configuration? Thanks in advance for all recommandations and suggestions.... Daniel Kocher

On Wed, Jun 16, 2010 at 4:35 PM, Shina Owolabi <shinacalypse at gmail.com>wrote: > Hi! > I've installed Asterisk 1.4.32 with freepbx-2.6.0 in an attempt to provide > a conference bridge for an existing Avaya PBX. I have no control over the > Avaya system, but I am able to speak with the admin in charge when I need > stuff done. I am running all this in a VirtualBox

Hi List, I have another issue on allowing outgoing calls to PSTN on Asterisk via Avaya Phones, I hope that anyone could help me fix this issue: *When I dial through Avaya phone i just here a "good bye message" reply from asterisk server. And here is the log:* == Starting OOH323/(null)-b7db8aa0 at internal,s,1 failed so falling back to exten 's' == Starting

The Asterisk Development Team has announced releases of Asterisk-Addons version 1.4.11, 1.6.0.5, 1.6.1.3, and 1.6.2.1. These releases are available for immediate download at http://downloads.asterisk.org/pub/telephony/asterisk/ These releases resolve several issues reported by the community: * Fix reading samples from format_mp3 after ast_seekstream/ast_tellstream. (Closes issue #15224.

The Asterisk Development Team has announced releases of Asterisk-Addons version 1.4.11, 1.6.0.5, 1.6.1.3, and 1.6.2.1. These releases are available for immediate download at http://downloads.asterisk.org/pub/telephony/asterisk/ These releases resolve several issues reported by the community: * Fix reading samples from format_mp3 after ast_seekstream/ast_tellstream. (Closes issue #15224.

Hello, I'm trying to create a H.323 trunk between Asterisk 11 and Avaya. I have done this before between Asterisk 1.6 and Avaya but had some issues placing external calls from the Asterisk to the Public network which is connected to Avaya. I'm trying to create that trunk on Asterisk 11 because the 1.6 is outdated and has no support. On the Asterisk side I have Aastra 6731i SIP phones

So far I have not found a way that I can register the Avaya phone with Asterisk. From what I have found so far is that Avaya phone needs the Avaya Media Server and Avaya Gateway. Looking at the h.323.conf (in Asterisk) and the file 46xxsettings.txt (avaya file located in tftpboot) there are no settings to make the phone initialize. I have sent an email to the Asterisk Users Mailing List to see

I'm trying to connect an Asterisk system to an Avaya Partner ACS R6 system. The problem I'm having is that I cannot get the partner system to get CallerID over the T1 modlue. The partner is using the T1 with E & M signalling (which I don't think can be changed), and whatever I tried didn't work. My only option right now is to get FXS ports on the Avaya side plugged into the

Hi I've a softphone account to a AVAYA H.323 system, basically, it has a numeric ID (which is the extension number) and a numeric password. Instead of using the default AVAYA softphone (H.323), can I make asterisk as a H.323 client and login to the AVAYA system via any one of its h323 modules? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm trying to integrate my asterisk PBX to an Avaya PBX. I am using chan_ooh323 from asterisk-addons. I am able to make a call from SIP Phone -> Asterisk -> Avaya -> Station (phone) and vice versa. I am also able to make a call from SIP Phone -> Asterisk -> Avaya -> PSTN. However I face problems when I make DID calls from the PSTN. The DID calls are made through

Hi List, Ive got a bunch of Avaya IP9640 that we want to convert to SIP and then hook up to Asterisk so we can dump this overpriced Avaya system. Ive got ahold of the SIP firmware, but I cannot find anything on how to convert the phone itself to SIP, when I go into setup mode it wants a "command" which im guessing is the program code like the rest of the Avaya systems works. Has anyone

Hi * Users, I ran into a problem when I was trying to communicate an avaya IP Office talk to asterisk with SIP Trunking. I had successful calls from asterisk to Avaya but not from avaya to asterisk. Can someone provide me insight on how to address it or the path to resolve it. The error I get is mentioned below: (dialing 32564 from avaya to asterisk) "[Nov 6 17:14:23]

Dear all, sorry for my OT but I need to know if Avaya voip server uses SIP or H.323 ??? Anybody can't tell me this...so I'm here for thei reason. Thanks a lot