similar to: X100P long delay before dial

I'm hoping someone can help me out with this. I am basically just trying to separate my outbound and inbound calls into separate contexts instead of having everything in a single context. Any help would be appreciated. Perhaps I've missed something really obvious.... Here is the network layout: <remote> <--TDM400P--> <nattedbox> <--IAX--> <liveipbox>

Hi, Has anyone managed to create a setup with a Sipura SPA-1001 as a client? Right now I can connect to the device by dialing the extension number but when I try to connect from the phone handset to make an outbound call it gives an unavailable tone. I'm using Line 2 on the SPA-1001 to connect to the local asterisk server, line 1 is used to connect to my VOIP provider until I can get the

I have a TDM4xx card with two (3 and 4) interfaces for my land lines. I have a basic setup working with them and one VoIP provider. Questions: 1. How do I determine which Zap line the incoming call is on so I can handle it differently? One line is my home phone and the other is my work line. I would like different dialplans for each. 2. When I have my work line set (via Verizon) to call

Hello. I have another issue. When I call in, everything is processed correctly, including voicemail, but I don't hear any ringing/ringback. exten => s,1,Zapateller(answer|nocallerid) exten => s,2,NoOp exten => s,3,Playback(pls-wait-connect-call) exten => s,4,Dial(${PHONE1}&${PHONE2}&${PHONE3}&${PHONE4},15,Ttm) exten => s,5,Answer exten => s,6,Wait(1) exten

I have installed my TDM11B according to the docs at the Digium page but I do not get incoming caller id. My telco confirmed that callerid should be passed but I do not see it coming in. I am in The Netherlands with a KPN line. The number is not even visible in console mode on * running stable 1.0.5. Ideas anyone? -- Starting simple switch on 'Zap/4-1' Feb 1 19:19:40 NOTICE[16582]:

Hi, I wish to connect several ATA186 Phones to each other, to iconnecthere and to the PSTN using asterisk. Please tell the appropriate settings for firewall (ports to open etc.) sip.conf and extensions.conf(part relevant to iconnect). Also I would be glad to get a working example of your ATA186 configuration. I tried searching the mailing lists and several sites but did not find an answer.

> -----Original Message----- > From: C F [mailto:shmaltz@gmail.com] > Sent: Tuesday, January 11, 2005 4:38 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] internal caller id on analog phones > connected tozap > > How are the analog phones connected to * ? this is where the setting > should be. They're connected to

I am attempting to write in incoming context for calls. 1. If the caller id is given and it is not black listed it will Playback a greeting and then right the phone or go to voicemail under busy or unavailable conditions 2. If no caller id is given, then Privacy Manager will ask for the number. I am testing 6145551212 to see if the black list will work 3. If a caller id is given, and it is

Sorry if this comes in twice. Wasn't subscribed first time :-( Anyone help me here...... It worked once :-( I have a static IP address which is on my private network.. Phone is 192.192.192.220 and asterisk server is 192.192.192.22 I have the 7690 with a SIP iamge (Whatever latest is ) I have 3 lines setup with Free World Dial up and have the 4th setup to connect to my asterisk server.

Here is an example of a couple of macros that help me where I have a SOHO with a home phone line and a work phone line. If I pick up line 2 my work line I would prefer the call I make to go out my office phone line same with if I pick up line 1 my home phone line I would prefer it go out my home line but want it to roll if needed. So with this little macro it is possible for that to happen.

Hello list, Can someone please point me out why would a stream like the following only write ONE line (the first) on the given file? Action: login Username: test Secret: 123456 Action: UpdateConfig SrcFilename: voicemail2.conf DstFilename: voicemail2.conf Action-000000: Append Cat-000000: default Var-000000: 127 Value-000000: >5555, Jason Bourne97, jason25 at noCia.gov.do ActionID:

Hi Lee, You need to specify the VM context that you are using.. so using your examples.. extensions.conf entry.. exten => 1000,1,Dial(SIP/1000,20) exten => 1000,2,Voicemail2(u1000) exten => 1000,102,Voicemail2(b1000) exten => 1000,103,Hangup should be.. exten => 1000,1,Dial(SIP/1000,20) exten => 1000,2,Voicemail2(u1000@sip) exten => 1000,102,Voicemail2(b1000@sip) exten

I'm wondering if there's a way it will show on the phone when there's a new message. Here's what I'm trying to do : in my extensions.conf when someone call from a PSTN line on my TDM04B card they have a choice. When someone press 1 for sales then I have 3 phones ringing at the same time. Each phone as already there own mailbox because if someone know there extension

Hi, First off, a big thanks to Digium (Mark, John, and Martin) for helping sort out a BellSouth config issue on our PRI. T100P working like a champ! Now it's back to tweaking the configuration on our SIP phones (7960s). The message_uri parameter in the phone's configuration file is working great. Dials comedian mail directly. Is there a way to let voicemail2 know what the incoming

I am unable to get my 9133i to register with my asterisk server. I am including config files below, this a simple test network so there's nothing secret in the config files. I have upgraded the phone to the latest software version (1.4.3) I'm not sure what the problem is. I can call the phone from a softphone, but the 9133i says "no service" on the screen and I can't dial

Anyone help me here? I am a newbie so be gentle ;-)...... It worked once and then I played with the configs. I have a static IP address which is on my private network.. Phone is 192.192.192.220 and asterisk server is 192.192.192.22 I have the 7690 with a SIP iamge (Whatever latest is ) I have 3 lines setup with Free World Dial up and have the 4th setup to connect to my asterisk server. Here

Hi. Has anyone experienced hangup detection problems with the VoiceMail2 app? I have a console phone on the FXS port. When I call a SIP phone, and get its voicemail greeting, I can enter the VoiceMail2 app, leave a message, and then hit # to stop message recording. Recording does stop, but the channel stays up inside the VoiceMail2 app (as shown by a "show channels" command) for about

Many thanks to Martin Pycko and Mark Spencer. Mark's suggestion below was correct: "Maybe it's stuck trying to send the e-mail notification. If you take the e-mail address out of /etc/asterisk/voicemail.conf does that speed it up?" Indeed it did! The problem turned out to be a 60second delay while invoking mail, caused by a mis-configuration of my hostname and

> -----Original Message----- > From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users- > admin@lists.digium.com] On Behalf Of Adams, Gavin Is there any additional information I could provide to start tracking this down? I was thinking about looking into the various applications source to see how they access the data elements for callerid. I know where the values are pulled

In this dialplan, the SIP user agent is a Sipura two line adapter with line 1 as SIP ID "1000" and line 2 as SIP ID "2000". Basically I have this set up so that 1000 and 2000 are "lines in hunting" on incoming extension "555". I want an incoming call to try to ring ext. 1000, if 1000 is busy, then ring 2000, if 2000 is also busy than ring Voicemail. Here