similar to: Problem in Reloading the asterisk server !

Hi All Total noob on the list so all help appreciated.... I've successfully installed Asterisk on an IBM A30P Thinkpad using fedora Core 2 (I'm looking at having a mobile PBX for conferences and shows). I've plugged in two Cisco 7960 phones.... The phones register with the Asterisk correctly and I can run the demo's and even the AIX demo through to digium works correctly.......

You are reading the instructions for the STABLE 1.0 version of asterisk and are using the CVS version. Goto the wiki and read the instructions for RealTime. -Matthew ----- Original Message ----- From: "Muhammad Rizwan Khan" <rizwan@advcomm.net> To: <Asterisk-Dev@lists.digium.com> Sent: Wednesday, January 05, 2005 12:42 PM Subject: [Asterisk-Dev] Asterisk with MySQL >

Hello again! I just got a SIP account and it seems - from a config on the net -, that I've configured it correctly. But I get no call to the outside. Registration was OK. I tried: channel originate sip/1/echo at iptel.org Application ... I see the channel active for a while, but no call gets established. In my config I have defined the section [iptel] for the outgoing call and I

Hi all, I registered a SIP account at budgetphone.nl/talkin2ya.nl Receiving calls works like a charm, I even redirected my normal PSTN number to the number I got from them so everything ends up in my * server. Before I ask them to take over my normal phone number I wanted to test all of it, so I ordered some calling minutes to test. Now I cannot get outbound calling to work with them. Anyone here

Greetings, I've noticed a problem that might originate from my Asterisk configuration, could use a hand in sorting it out. Problem is a 488 response from Asterisk whenever it gets RTP/SAVPF profile in the SDP. My current setup has Asterisk Kamailio realtime integration, and Kamailio uses dispatcher to route calls for Asterisk to handle. Now I have only one Asterisk, on the same machine as

I have some phones (and an ATA) that are shared between two users who each have separate voicemail but they are not behaving as desired nor expected. Incoming calls show up on the correct lines. Calls originating from the device are seen, at the terminating device, as coming from the account listed last in sip.conf, regardless of the line selected. This creates three main issues I would like

Skipped content of type multipart/alternative-------------- next part -------------- Reliably Transmitting (no NAT) to 111.111.111.50:16666: INVITE sip:111.111.111.50:16666 SIP/2.0 Via: SIP/2.0/UDP 111.111.111.8:5060;branch=z9hG4bK360502ae;rport From: "asterisk" <sip:asterisk@111.111.111.8>;tag=as348de10b To: <sip:111.111.111.50:16666> Contact:

Can anyone tell me why my inbound calls keep getting rejected with 401? Here's the debug information: <--- SIP read from UDP:147.135.32.221:5060 ---> INVITE sip:6087294351 at 216.26.109.22:5060 SIP/2.0 Call-ID: 31007e-31 at 147.135.32.221 CSeq: 1 INVITE From: "Wi M"<sip:4144038968 at 147.135.32.221;user=phone>;tag=9bbc To: "Gregory Malsack"<sip:s at

Greetings List. we're facing a strange case with my system where in the middle of the call .. after like 7 minutes (not necessarily ) the callee is unable to hear the caller however the caller is able to hear the called party. the scenario is the following. 1- 15 computers running Windows XP SP3 joining a Windows Domain Controller with DHCP , DNS, ISA Internet Acceleration Server. 2- Internet

> what is the sip.conf for 1239 > which I'm going to assume is a extension on the TNT > > Barry > > JR Richardson wrote: > > Hi All, > > > > I have a lab setup with two asterisk servers and a MAX TNT in the > > middle like this: > > > > asterisk sip >< sip TNT pri >< pri asterisk exten 1239 is the CID Number from the

I am having trouble getting Google Chrome to accept a WebRTC call coming from Asterisk, even though Firefox can (now) accept the same call without issue. My setup is as follows: Server: CentOS 7 x86_64 (Elastix 4 RC) with IP: 10.1.0.4 192.168.5.146 asterisk-11.21.0 patched to work around https://issues.asterisk.org/jira/browse/ASTERISK-25659 openssl-1.0.1e-51.el7_2.2.x86_64 [root at elx4 ~]#

Hi, Firstly, what I'm trying to do is: * Get asterisk to pick up a SIP call via a DID * Prompt the user * When the user puts in a number, go to IAX.conf and route it according to what I've specified there, i.e Least Cost Routing, etc. I've set-up something similar to what I've found online, but it doesn't work! Asterisk doesn't pick up the call at all..... :( The files

Hi, Anyone here using sipgate.de ? It worked for months, but for a couple of days now I'm unable to register with them. My account is ok, because I can login to the website. Asterisk keeps showing me: Feb 25 23:50:18 NOTICE[5144]: chan_sip.c:5269 sip_reg_timeout: -- Registration for 'XXXXX@sipgate.de' timed out, trying again (Attempt #n) I looked at the sip debug stuff, and all I

Hi Everyone, I was hoping someone might know why I am experiencing a problem with Asterisk logging the event: [May 3 12:07:41] WARNING[30371] chan_sip.c: Maximum retries exceeded on transmission 03f007af2b15cd0b54b0c368265d97be@sip.externalprovider.com for seqno 669371069 (Critical Response) This is happening after: - call is setup, 2 way audio - call can function correctly for up to 5

Hello: I noticed in few references that asterisk and ser and complementary. Meaning asterisk handles connections to PSTN and voicemail but SER is better for routing SIP traffic. Is anyone using just asterisk for production purpose. Meaning serving a high number of callers. Is it mandatory to use SER behind asterisk? your feedback would appreciated. -Gaid -------------- next part

Hello everyone, I'm getting DIALSTATUS=CHANUNAVAIL when a call is trying to get one of my queue interfaces, despite the fact it is free at that time, can you give help? 1. I see many sip channels from that extension: [root at mysweetpbx]# asterisk -rx "*sip show channels*" |grep 648 Peer User/ANR Call ID Seq (Tx/Rx) Format Hold

Hey guys, I've been running asterisk on my server for some time now (currently running Asterisk 1.6.2.0). I am having security issues with my SIP accounts. Unauthorized people have been able to access the server (bots) and they have been able to make calls (in today's case to Cuba). Here's a copy (slightly modified) of my sip.conf: [general] context=default ; Default

Gentlemen, I have 3 faxes attached to an Asterisk. Fax - SPA2102 - Asterisk. 0851711201 and 0851711290 is on our WAN, no NAT. 0197673581 is outside our WAN and needs to be NAT'ed. Sending a fax from 0851711201 to 0851711290, no problem, switches to T38 and fax goes through. Sending a from 0197673581 to 0851711201, no problem as long as i dont enable T38 on 0197673581. But, if i enable T38

We have had 20 calls over the last month where the SIP channel has not identified that the person on the receiving end has hung up. Is there a way of fixing this ? TIA Julian

Hello, For the moment I have the following settings in my sip.conf. I want to optimize them to archive the following things: - for the moment all my users will re-register too often. I want that only lagged users to re-register quickly. - check from time to time all users but no too often to see if is logged and can be called. Overall i want only lagged users to reregister and users with good