similar to: application sdp message and not answering call

All, I am connecting to a CS 1000 nortel PBX. I can call out, I have limited success with call in. I get debug traffic that a call is coming in but I get the message "Unable to create/find channel". I was expecting that incoming calls over the trunk would be handled from my sip definition and goto the nortel context. It is not. Below is the actual incoming call debug information. I am

I am connecting to a Nortel CS 1000. I can place calls out to an extension so we are half way there. When calling into the box I get the following from sip debug ip X. I get dead air when calling into the box. In my sip.conf I have a context of nortel and in extensions.conf the nortel context just has a s,1,Playback(demo-congrats). Any suggestions as to why the call in might not be working but

Here is the CS1000 log. Again, the CS1000 using SIP accepts incoming calls just fine. However, using outgoing call files the CS1000 is hanging up after I answer the call. I dont know why? Thanks, for any assistance. Jerry my sip.conf entry is: [Nortel] type=friend dtmfmode=rfc2833 username=XXXXXXXXX disallow=all allow=ulaw allow=alaw

Skipped content of type multipart/alternative-------------- next part -------------- Nov 21 14:17:47 VERBOSE[32580] logger.c: <-- SIP read from 172.25.103.222:5060: INVITE sip:1715;phone-context=exp_net.ascom@ascom.be:5060;maddr=172.25.96.48;transport=udp;user=phone;x-nt-redirect=redirect-server SIP/2.0 From:

After some more screwing around with leaving and rejoining the ADS domain I was finally able to access a share with "valid users =" set to a domain group I was a member of. The _only_ change I made after this was to add yet another group to the valid users on the share and restart samba...after that I could no longer access the share. I removed the additional group, restarted samba and

Hello friends, I am using samba to join a linux box to an active directory domain to use as a file server. I would like to be able to control access to shares based on AD domain groups. However, even though winbind seems to be seeing the groups fine, samba is not granting access to users who are members of the group. I am able to successfully join the system to the domain and granting access to

From: Rock <zimilo@code-trick.com> --- fs/btrfs/backref.c | 10 ++-- fs/btrfs/qgroup.c | 16 +++--- fs/btrfs/send.c | 2 +- fs/btrfs/ulist.c | 154 +++++++++++++++++++++++++++++++++++++--------------- fs/btrfs/ulist.h | 45 ++++++++++++--- 5 files changed, 161 insertions(+), 66 deletions(-) diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index ff6475f..a5bebc8

Greetings: We are evaluating the performance of R matrix algebra es as we port a MATLAB R14 script into R. The MATLAB code basically evaluates the AX=B system on sparse matrices that result in output matrices of 100 to 1,000,000 rows/columns. Our R prototype script uses spase base matrices and the methods qr() and qr.coeff(). The following statements are called inside a doubly-nested loop: G

I have a Redhat Enterprise Linux (v3.0) box running Samba 3.0.9-1.3E.3. This box only has two Samba shares created on it, each of them with a single "valid user" entry. The relevant smb.conf information is included below. The problem is that when user1 tries to connect to \\server\user1 and authenticate via AD, the connection fails with a "unknown username or bad

Hi, I`m trying to use Chanspy for a customer that wants to listen to his employees so he can train them better (or so he claims). In any case, it looks simple but there is something I`m not doing right. When a call is incoming, I set SPYGROUP using Set(SPYGROUP=1234) When I use, on another phone, Chanspy(|qg(1234)) Which should allow me to listen to conversations that hit the first (Set

I have an application that requires I be able to dial into an asterisk box, then from there dial out to another user through a PSTN. I'd like to be able to both 1) record this call and 2) let another user dial in using something like ChanSpy to listen to the conversation. I can get this working by executing an auto-dial script to connect one end of a call to an outside Asterisk box which

Greetings friends: So heres the problem I've been fighting for the last month to no avail. My samba server is joined to a mixed mode AD domain. I want to set permissions on shares based on AD groups, however only _some_ of the group's members are allowed to access the share when I add their group to "valid users". As far as I can tell there are no differences between the AD

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 This release of libvdpau switches the build system from automake & autoconf to meson and adds definitions to support decoding of the VP9 video format. Aaron Plattner (7): Switch the build system to Meson Add .gitlab-ci.yml doc: Don't use line-wrapping backslashes in \defgroup definitions CI: Build documentation

We were trying to normalize bands that didn't actually exist (e.g., the last band with 320-sample frames at 32kHz). Thanks to John Ridges for the report. --- libcelt/celt.c | 24 +++++++++++++++++------- 1 files changed, 17 insertions(+), 7 deletions(-) diff --git a/libcelt/celt.c b/libcelt/celt.c index 31d35f8..287c720 100644 --- a/libcelt/celt.c +++ b/libcelt/celt.c @@ -1137,6 +1137,7

Hi Sanjay, You used Alive correctly, of course :) At this moment we cannot give you the best precondition. It’s on the todo list, but it’s not even started yet. It’s a much harder problem to solve. We do have a mode to compute the best set of nsw/nuw/exact attributes in the transformed expression, but it’s not enabled on the web interface yet (InstCombine was missing quite a few cases last

Dear All I have a data.frame like that: structure(list(name = c("Gga_rs10722041", "Gga_rs10722249", "Gga_rs10722565", "Gga_rs10723082", "Gga_rs10723993", "Gga_rs10724555", "Gga_rs10726238", "Gga_rs10726461", "Gga_rs10726774", "Gga_rs10726967", "Gga_rs10727581", "Gga_rs10728004",

Mapping oldstable-security to oldstable-proposed-updates. Accepted: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 1.8 Date: Fri, 12 Jun 2015 13:09:44 +0000 Source: xen Binary: xen-docs-4.1 libxen-4.1 libxenstore3.0 libxen-dev xenstore-utils libxen-ocaml libxen-ocaml-dev xen-utils-common xen-utils-4.1 xen-hypervisor-4.1-amd64 xen-system-amd64 xen-hypervisor-4.1-i386 xen-system-i386

Accepted: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 1.8 Date: Fri, 12 Jun 2015 13:09:44 +0000 Source: xen Binary: xen-docs-4.1 libxen-4.1 libxenstore3.0 libxen-dev xenstore-utils libxen-ocaml libxen-ocaml-dev xen-utils-common xen-utils-4.1 xen-hypervisor-4.1-amd64 xen-system-amd64 xen-hypervisor-4.1-i386 xen-system-i386 Architecture: source all amd64 Version: 4.1.4-3+deb7u8

Hellos, I am having issues with my meetme conferencing. When I dial the conferencing number, It hangs after a few seconds.I have read somewhere that I need to enable ztdummy, which I have done but still no changes. Here is my log ~=~=~=~=~=~=~=~=~=~= PuTTY log 2009.08.12 18:44:43 =~=~=~=~=~=~=~=~=~=~=~= -- Executing [1;36;40mMacro [0;37;40m(" [1;35;40mSIP/1215-fc5b [0;37;40m",

Hellos, I am having issues with my meetme conferencing. When I dial the conferencing number, It hangs after a few seconds.I have read somewhere that I need to enable ztdummy, which I have done but still no changes. Here is my log ~=~=~=~=~=~=~=~=~=~= PuTTY log 2009.08.12 18:44:43 =~=~=~=~=~=~=~=~=~=~=~= -- Executing [1;36;40mMacro[0;37;40m("[1;35;40mSIP/1215-fc5b[0;37;40m",