similar to: Sipura 3000 Analog Line No Answer, No Audio

Hi there everyone! I've bought a Sipura SPA 3000, and succesfully connected it to my Mac, where I installed Asterisk 1.4.0. Both ports (FXO and FXS) are well configured). However, living in Brazil, I'd like to know if there are optimal settings to my PSTN that I should enter into the config of the device. I experience a little bit of echo on the FXO probably because I raised the gain of

Ok here is another problem I have run into. I have a Sipura 2000 and I have been able to configure line 1 with only one small problem. But I can't get the line 2 working with asterisk. Here are samples of my sip.conf and extensions.conf. If I disable line 1 I can then get line 2 working. Is there a sample configuration for the Sipura to get both ports working with Asterisk. Sip.conf

Hi all, We have several sipura 3000's working well for outbound calls, however the issue we have is that when calls are sent to the Sipura with Dial(SIP/${EXTEN:0}@sipura1) the Sipura does a SIP answer immediately and then proceeds with the call "in band" therefore sending dialing sounds back to the caller. Other SIP gateways we have notably the Vegastream and others do not do a SIP

I recently upgraded from a few month old CVS version of Asterisk to v1.0.1, and dialing out through my SPA-3000 stopped working. Notice right after INVITE, in the old CVS version, it includes the number I'm trying to dial (8019596) which works fine, however in v1.0.1, it doesn't include the number and of course the dial fails. Did a config option change out from underneath me or

My apologies for the off-topic post ... No matter what settings I try, when I dial in to the SPA-3000 on the PSTN line, it picks up the call and immediately gives me a fast busy tone then hangs up. The info tab says under PSTN Line status: Last PSTN Disconnect Reason: PSTN Disconnect Tone which seems to indicate that the SPA thinks the caller has hung up. Since I am in Japan, it is possible

Anyone know what I need to do to get the FXO port on the SPA 3000 to forward calls to Asterisk? My Asterisk is running on port 5061 and I set the dial plan on the device to forward to s@asteriskip:5061 but Asterisk is not picking it up. I can see on tcpdump traces that the Invite packets do go to through to the asterisk machine on port 5061, but it's not picking them up. sip debug does not

Anyone having problems with registration to * from a SPA-841? I got a SPA-841 a week ago. I noticed that sometime it could not be reached (dialed to) and it can't dial. In this case the line LED is yellow. I enabled logging to syslog and there is a hint as to what happens. For some reason sometimes it gets "401 Unauthorized" Any ideas what is happening and how to fix it? Phone

Hello, I've been experimenting with Asterisk 1.0.6 and a Sipura SPA-3000, and I've run into a couple of questions I haven't yet found clear answers to: It appears that the SPA-3000 has no call progress on it's FXO interface? Asterisk considers a dial() as answered when the SPA-3000 has dialed the number on the PSTN line, not when someone has answered a phone on the

I'm new to asterisk and already a fan. Please forgive me if my questions are covered by some FAQ and thanks in advance for any pointers anyone can give me. The basic problem that I'm having is that sometimes outgoing calls result in a busy signal when the outgoing line is free. I'm thinking that the channel is timing out or something but haven't figured out how to debug or gather

Hi All, I am using a Sipura SPA-3000 as an FXO gateway to bring calls in and out of Asterisk. I am using "PSTN Ring Thru Line 1" (on the "PSTN Line" tab) so Asterisk answers the call rather than the SPA-3000. It is all working perfectly except I can't get the SPA-3000 to pass caller ID to Asterisk. It passes "Display Name", "User ID" and any "PSTN

Hi All, I'm on of those brave souls who bought into the preproduction beta of the Sipura SPA-3000 FXS/FXO adapter. I've had the unit a few days and am exploring it's workings. I really want it mostly as a straightforward FXO adapter, to replace an X101p. Let me be clear, I'd love to support Digium in every way possibe, and will likely buy a TDM40 card shortly. But, the X101p has

Hi list, Well I really didn't want to see things get to this point, but Sherman at Sipura along with their President Jan F. leave me no other choice. SIPURA has been provided a letter from our attorney for Breach of Contract and damages. They have yet to respond. A quick background. 1. Sherman (SIPURA's Director of Marketing), stated that we would do a join press release for the Oct

Hi List, I hope this setup must be done by our astersik users.. I am using Sipura 3000 to receive PSTN calls and forward those calls to asterisk for voice processing and after that, I am transferring call to extension through FXS port on SPA 3000. Currently, media of call is trombone through asterisk. i.e achieving blind transfers on asterisk with SPA 3000. Is it possible to stop trombone

Hi All, I am using a Sipura SPA-3000 as an FXO gateway to bring calls in and out of Asterisk. I am using "PSTN Ring Thru Line 1" (on the "PSTN Line" tab) so Asterisk answers the call rather than the SPA-3000. It is all working perfectly except I can't get the SPA-3000 to pass caller ID to Asterisk. It passes "Display Name", "User ID" and any "PSTN

Hi, I'm looking for a full list of xml provisioning variables of the SPA-2100/3000. Currently the Sipura website has example XMLs only for the SPA-841 [1] and SPA-941 [2]. I'm mostly interested in the CallerID type selector variables and whatever variables control the PSTN<->VoIP settings. Sipura Configuration website form field names are numeral only. :( [1]

Greetings, What is the recommended settings for using SPA-3000's FXO port for dialing out to PSTN in regard of the DTMF? The voip lan contains SPA-2100 and SPA-3000, with all fxs/fxo ports registered to the Asterisk box with unique username/passwords. The inbound PSTN DTMF works excellently, e.g. people calling from PSTN into the * box are able to pick IVR items with DTMF reliably. The

I had a problem in the past with a SPA-3000 acting funny that Sipura helped me with by telling me how to factory reset it. They responded in less than a day to my email request and the unit has worked fine since. I've had similar turn around on requests related to a batch of SPA-841 phones. They were all handled by real people who appeared very knowledgeable on the products. This appears

Dear list, I am playing with Sipura 3000 since last week. Through the wiki pages I could get running it reasonably well. My setup is that of a Sipura, linked with a local analog cordless phone, a local PSTN line and the setup to link to an asterisk server located at a remote static ip address. I can dial the cordless phone from other extensions located at the asterisk server; I can dial out

This question isn't entirely Asterisk related, but I'm hoping that someone here may have the knowledge to respond to me anyway. I'm using Asterisk with several Sipura SPA-2000 SIP devices as FXS adapters. I would like to have my SPA's automatically provisioned through http or tftp, but I can't find any information on how to do so. Sipura's tech-support has not been very

I am located in the UK, and I am using Sipura spa-2000 adapters to connect analog phones to a voip network. The network connects to the PSTN as well via the Sipura spa-3000 adapter. I would like to provide surge protection for the spa-2000 and the spa-3000 adapters. 1. For spa-2000, fxs port: What is the maximum tip-to-ring voltage before damage to the the adapter occurs? 2. For spa-2000,