similar to: 'beeps' while recording..?

I have a normal setup of calls coming in on analog lines (4 of them) coming into an old KX1232 pbx. I have those lines forwarded to a T1 card in the KX1232 going over to my T1 card, it then uses IAX going over to my REAL asterisk pbx. (these steps are there for testing and other items) Anyway after a 10 minute call asterisk gives a faint beep, beep, beep and then hangs up the line. Is there

There are no cordless devices in this situation. :) Jerry Geis wrote: >/ I have a normal setup of calls coming in on analog lines (4 of them) />/ coming into />/ an old KX1232 pbx. I have those lines forwarded to a T1 card in the />/ KX1232 />/ going over to my T1 card, it then uses IAX going over to my REAL />/ asterisk pbx. />/ />/ (these steps are there for testing

I have a very annoying problem that we hear on our end, but the other party doesn't hear. There are random beeps and echo type noises that occur. They are present during voicemails, and present on my end during calls. Is anyone experiencing the same deal? I have asked this a number of ways on the list, and never get a response... Thank you. Sean Garland Mount Shasta, CA

On boot, my computer has been beeping at me and showing the BIOS screen for almost two minutes. During that time, it does not respond to tab or delete. Where do I find the beep codes for a MSI K9N SLI Platinum Series motherboard? My google-fu has failed me. -- Michael hennebry at web.cs.ndsu.NoDak.edu "SCSI is NOT magic. There are *fundamental technical reasons* why it is necessary to

Asterisk 1.2.4 FreePBX 2.0.1 I am running a TDM400 card with 3 FXO and 1 FXS cards. During most all calls, there are random beeps in the background. The other party cannot hear this (I believe since they haven't said anything). This will happen when people leave voicemail, and also on most or all calls. I am running Polycom IP 501 phones. The beep/tones are not DTMF. It does not happen

So, just today I noticed a problem with kernel 2.6.18-194 (CentOS 5.5) on several Intel DP965LT systems; the system beeps (such as terminal beeps) are no longer passed through to the external speakers. This is a problem because in our situation the boxes are distant from their monitor/keyboard, the system speaker on this motherboard is extremely weak, and there are no system speaker header pins

Any ideas on how to disable the audible incoming call beeps with *. We have a dial pool and if someone calls into the pilot number and we're talking to them, if another call comes in, both us and the far end users hear the incoming call beep. -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have been trying to track this down for a while to no avail. I have a variety of different SNOM phones (the entire 3XX series) and have also tried on a variety of different Asterisk versions (pretty much the whole 1.2 and 1.4 train) When I "Page()" phones in Asterisk, I only intermittently get an audio indication on the recipient phone. Audio Indicator is turned on, and I'm

I have been trying to track this down for a while to no avail. I have a variety of different SNOM phones (the entire 3XX series) and have also tried on a variety of different Asterisk versions (pretty much the whole 1.2 and 1.4 train) When I "Page()" phones in Asterisk, I only intermittently get an audio indication on the recipient phone. Audio Indicator is turned on, and I'm

Hi All, I have been working on a project where I need to record a call in Asterisk and then split the recording into multiple audio files based on a presence of particular sound (i.e. beep) in a recording. I know this is out of scope for Asterisk but I wanted to benefit from someone else's experience if it has been done earlier. I have googled a bit and seems that Audio fingerprint(

I currently have my Acer Aspire One netbook set up with Fedora 11. I would like to change it over to Centos 5.4 if I can. I downloaded the Centos 5.4 i386 livecd image and made a bootable USB flash drive out of it. Unfortunately, when I boot off of that flash drive, Grub (I guess) immediately turns the screen entirely white. If I hit a key I can faintly see the outline of "Press tab to

Hi, [I'm Using redhat linux 7.1 with R-1.4.1 rpms.] Last summer, Henrik Bengtsson wrote to R-help: > Is there a way to turn of the (annoying) beep that occurs when one calls the > locator() command and clicks the mouse. Try > > plot(0) > locator(n=10) > > I am running Rterm on WindowsMe/Cygwin bash and I don't know if this is the > case on other platforms.

freebsd quite current ports tree 1.01 asterisk spa3k at 2.0.11(GWg) for calls in from the pstn side of an spa3k to asterisk, i get sporadic short beeps. they are not related to sip re-reg time, which is all that has occurred to me so far. calls in from the fxs side of the spa3k and out through nufone do not exhibit the beeps. calls from the fxs side of the spa3k out the fxo side do have the

I still have problems with beeps and clicks on all my calls. I have polycom sip phones. I also can hear the beeps and clicks on some of my messages, which would lead me to believe that it is more of a decoding problem on the zaptel card. Any ideas? Thanks Sean Garland

Greetings, (Apologies if this is an FAQ, but I've Googled for hours and haven't come up with anything yet.) I have an Asterisk system deployed at a customer's site. It is connected to the outside world by a local SIP provider. When someone calls in through the trunk to leave a voicemail, Asterisk is not sending any RTP packets back through the trunk after the beep is played. This

I have an unusual and recurring problem since I upgraded to Asterisk 1.4. Sometimes, mid-way through a call, I hear 6 shorts beeps and then the inbound voice quality degrades massively. It sounds like the other user is a robot...etc. I'm guessing something (aastra 480 or Asterisk 1.4) is warning me about a problem....but what! Has anyone experienced this? MD

Can someone give me a clue as to why I keep hearing DTMF type beeps on my phone calls. It sounds exactly like someone on the other end is pushing a key on their phone but they are not! Has anyone ever heard of this before? It use to happen once in a while, today it's been happening a LOT and it's driving me batty.. -- Start Your Own ISP! http://www.YourOwnISP.com

Hi, There is a long call setup time untill the call connects. How can I play a beep tone say every 4 seconds to the caller untill the call connects? Tx. Shaun -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090304/38e17d3e/attachment.htm

Is there a way to tell asterisk to beep every few seconds rather than play MOH. Thanks Roy Anciso Director of Technology Manistee Intermediate School District 1710 Merkey Road Manistee, MI 49660 Ph: 231-723-4264 Fx: 231-723-1690 roy at manistee.org -------------- next part -------------- An HTML attachment was scrubbed... URL:

This is really doing my head in! For some reason, my asterisk box can't playback beep.wav. I have this extension defined in my internal context: '10001' => 1. Answer() [pbx_config] 2. Wait(2) [pbx_config] 3. Record(/tmp/asterisk/10001:gsm) [pbx_config]