similar to: Chan OH323 and overlapping digits

Hi, does anyone know about a plugin that allows dialling a contact from the phonebook of evolution or T-bird? -- Alexander Topolanek http://www.topolanek.at

Hello, I'm running several asterisks in a carrier environment. The asterisks do mainly gateway business between E1 cards and IAX with some routing logic. On one key server I see issues of "Auto-congesting call due to slow response" coming every number of calls. The IAX peer is in the same subnet, the servers are not really loaded. Versions in use are 1.2.2 and 1.4.23-rc3, with rsa

I was just wondering if someone has experiences to use Asterisk in an existing Ericsson MD110 environment. Particulary I'd like to know if it is possible to use the MD110's system phones directly connected to Asterisk. I'm not very familiar with it but would it be possible to use ADSI with these phones? Are they more like analog or more like digital phones or is the protocol even more

Hi. Calling from Ericsson MD110 via H.323 trunk to an asterisk 1.4.4 I get the call established but no sound heard on either end. What is the best/correct way to try and see what codecs Asterisk is using on each end of the call as it passes through Asterisk? And is there any way to see that voice is in fact being passed through Asterisk during the call (some counters etc.)? Thank you

I have been asked by a potential customer whether we can connect an Asterisk box to an Ericsson MD110 that has an E1 port with ISDN-USR. They are unable or unwilling to upgrade their E1 port to QSIG. Has anyone here had experience of successfully making such a connection? I have found a couple of hits on Google that suggest it "should" work, but I'm after something a little more

Hello all, I was wondering if someone already wrote something to support a serial connection(ICU) on PABX's that's used for signaling. What I currently have is a connection between an Ericsson MD110 and * with analog trunks. Problem with this is, that all CallerID info is send over a serial link (ICU). Is there anyone who knows if there is support for this on * or to find the

hi .. i've just installed and licensed an instance of the G729 codec. I am trying to connect through asterisk to Go2Call server .. According to their info it involves dialling extension 729 on voip01.go2call.com, to get the IVR. my extensions.conf shows : exten => s,2,Dial(OH323/h323:729@216.52.153.206) which I think is correct, I have G729 enabled in the OH323.conf file and it seems to

Hi guys! We have a call centre that has been moved across from an old Ericsson MD110 PABX to an Asterisk server with those in the call centre using X-Lite as their softphone. I'm trying to get Agent presence configured so that X-Lite gives the operators a visual indicator of their status - logged on, off and on "pause". I'm using chan_agent for the agents, so agents are

Hello all, as good? It would like to make a question, asterisk supports the protocol qsig, for interconnections in ISDN with equipment Siemens HiPath 4000 or same Ericsson MD110, so that it could identify to the name and the number of hosts and also to use some features of asterisk in the Siemens/Ericsson equipment. Greetings Josu? -------------- next part -------------- An HTML attachment was

Hi, i managed to connect to Ericsson MD110 with PRI at last. And made a successful call thru asterisk to ericsson. But when i try to call from ericsson to asterisk i got an error on asterisk side. And i couldnt figure out why. Here's my extensions.conf about incoming calls. [DID_span_1] include = DID_span_1_timeinterval_all,${timeinterval_all} DID_span_1_timeinterval_all] exten =

Hi, i know i am asking a lot of questions lately in this forum..sorry about that first of all. :) Ok, here is the deal.. I am trying to make a hybrid system with an ericsson MD110 and asterisk. Internally we have 4 digit phone extensions on ericsson.. and so in asterisk. So, what i want to do is to call pbx side without adding 9 or etc to the begining of the number from asterisk clients.. For

Hi, I'm using a Junghanns Quadbri ISDN card on some lines from the Austrian Telekom. Things are working, the only missing stuff is to add a "0" as a prefix to each incoming call, to make it possible to answer missed call lists. I'm using the 0 as the prefix for outside lines. I've experimented a little with the prefix settings in zapata.conf, but without success:

Hi. Anyhone have any experience with trunking between Ericsson MD110 and Asterisk using H.323? I've tried both ooh323 and the /channels/h323 one in version 1.4.4 and 1.4.0 of Asterisk. ooh323 does not manage to establish the call (starts to ring but then disconnection when answering the call on the Asterisk end) but using the channels/h323 driver I can get the call established from

Hi, recently I changend a few things in the configuration of the Asterisk 1.2.17-BRIstuffed-0.3.0-PRE-1y-d of a customer. One demand was that different groups of SIP-Phones are using different trunks to the outside worls, so I moved some of them to a Support context. However, dial out from this phones failes as they're still looking for an extension in the default context, which doesn't

Hello, I've been trying to send traffic to a Cisco Call Manager 3.2, but with no luck. Here's whats happening: * Call gets to CCM * Call gets to the gateway * Rings a couple times on destiny * Call gets hungup. On the CCM I get the following error: MediaManager - ERROR wait_AuConnectErrorInd On the Gw (Cisco AS5300) I get a disconnect cause of 2F (Resource not available) On asterisk:

Hi All, I have installed chan_unicall and MFC/R2 successfully, and is runnign fine. But I noticed that once unicall is installed, asterisk CPU usage as reported by 'top', jumps to 99% every few seconds. I have no incoming calls, and I have even removed the E1 lines from card and I tried almost everything possible but I was not successful in determining the cause of this high cpu

I'm trying to use a Howlink CL-100 ip phone with * It's h323 phone with very limited protocol support. But it's enough that I can use it to dial netmeeting client and artisoft pbx just fine. When I try to dial my * with it using either chan_h323 or oh323, it seems to fail on negotiating H245. Maybe this phone doesn't support it? I've used all different versions of

Hi, I'm playing around with the queue features, and I'm looking for a solution to indicate the agent status (logged on / logged off) on the phone (Grandstream GPX2000 or SNOM 190) It would be nice to use one of the busy lamps... thanks -- Alexander Topolanek Intelligente EDV- und Telekommunikationsl?sungen Montage von Sicherheitstechnik Probst Peitlstr. 85 2103 Langenzersdorf +43

Hi, I'm trying to make ooh323 works with one asterisk box running 1.2.15 version. I can ring from a h.323 to SIP and SIP to H.323, but when the call is finished when the phone is answered. This is the log when I call from the H.323 device to a SIP device: Feb 23 10:57:32 VERBOSE[6096] logger.c: -- Executing Dial("OOH323/Telconet Mantaer-c5f8", "SIP/666|30|TtrwWC")

FC2 Asterisk 1.0 When I dial a H323 dialup to an existing OKI Voip Router (BV1250), I get an EndedByRefusal yet the OKI Gateway is setup with the corrent reply ip addresses etc etc, unfortunately its an existing multiple voip router setup with g723.1 and g729a, so changing the codec on the router maybe an issue. I have compile in the h323 as per the channels/h323 setup with the listed libraries.