similar to: Problem with SIP clients

Hi, I installed Asterisk an all works fine exept for Grandstream. When I call with a softphone (ex X-ten) to a Grandstream (BudgetTone-100), I can make a conversation. = ok When I call to a softphone with a Grandstream I can pich up the call with the softphone but the Grandstream keeps ringing like on the other site you didn't pick up the phone.(even if you do so) It's the same when I

Hello everybody, I am sorry to bring this up again if this kind of echo issue has ever discussed. Phone2 in below call path experiences quite annoying echo: Phone1 --> FXS (TDM400P) --> Asterisk --> SIP GW --> PSTN --> Phone2 It is annoying as on phone2, we can hear the whole words we say with the level of maybe 25% of the original sound. I can reduce the echo to maximum with

Hi! I want to tell asterisk to simply pass-through any codecs that my phones support. I have to use codecs that are not popular and implemented by a third-party, asterisk has nothing to do with them. I've made a test with g722 (that asterisk doesn't support), i've set all my two snom 300 phones to support only g722 and asterisk declined the sip invitation. That is bad for me. Is it

I have the following setup: AnalogPhone1--TDM400P-ASTERISK---via SIP---Softswitch--------POTS Phone2 When I call from AnalogPhone1 to Phone2 I hear a ringing tone and all is well. When making a call from Phone2, I get a dial tone but after dialing the number I hear nothing (no ringing tone). On Asterisk console it says that a call is coming in and that it is ringing Zap/2. I can also hear the

Hi, I've have followed through the help docs in trying to get an initial setup going with two phones and the asterisk server. Firstly, all I'm trying to do is get the two phones actually talking to one another VIA asterisk.. I've added this to sip.conf: [phone1] type=friend host=dynamic defaultip=192.168.1.106 ;username=blah ;secret=blah dtmfmode=rfc2833 ; Choices are inband,

Hi, all Can someone tell me where to tell asterisk no to use 127.0.0.1 IP (localhost)? When I am registering with VoIP providers, they get my info as s@127.0.0.1. (This is SIP registration). Also, in SIP logs, when calling I am getting things like this: Executing SetCallerID("SIP/phone2-22c3", ""CID Name" <CIDNUMBER>") > in new stack > -- Executing

Hello I have one phone (phone1) in one network, the other (phone2) in public network. both can call the other side; phone1 can be heard by phone2, phone2 can't be heard. I don't have NAT set on both end, but I use rtpproxy on SER. Is NAT still necessary to be set on both phones? Thank you! steven

Hi all I have registered my phone1 in asterisk server 192.168.0.9 and phone2 in asterisk server 192.168.0.6. Both are sip phones. i configured the extensions.conf file in both the server. the extensions.conf file on server 192.168.0.9 is exten=>301,1,Dial(SIP/301@192.168.0.6,20,tr) exten=>401,1,Dial(SIP/phone1,20,tr) 301 is the extension number for phone 2 in asterisk server

Hello there, I appreciate any help about this problem that I can't figure out... I need to record all my calls: this is pretty easy using Monitor() before the Dial(). eg: exten => 425,n,Monitor(wav49,/var/spool/asterisk/monitor/425/${EPOCH}_${CALLERID(num)}_in,mb) exten => 425,n,Dial(${PHONE1},10) Now, I want to create a call group: I mean, I want a number (eg 800) that makes

Dear, When I start asterisk -vvvvvvgrc and I ask 'sip show peers', I don't get the ip adress in the 'Host" field. Name = phone1 and phone2 Host=unspecified mask 255.255.255.255 port = 0 status = unmonitored I can ping the two phone's and get a reply (also from the laptop) phone ip adres 192.168.10.12 and 192.168.10.13 (server 192.168.10.11and laptop 192.168.10.14)

I don't know if this is possible, and I can't quite get my head around how to do it... If I am using DUNDi for redundancy in a cluster, when Phone1 makes a call to Phone2, both Asterisk A and B will be in the RTP stream: +---+ +---+ | A |-----| B | /+---+ +---+\ / \ Phone1 Phone2 Is there a way configure re-invites

hi. i have dialplan with 2 simultaneous calls - dial(sip/phone1&sip/phone2). when i cancel call on phone1 (push "reject" button), the call is still ringing on phone2 can i cancel call on both phones from one place(one phone)? thanks -- --------------------------------------- Marek Cervenka =======================================

I have been looking around some and I can't seem to find anything which will answer my question. If I have two Asterisk boxes in different locations which are linked to each other over the internet, can I configure the boxes to use each other's lines as local? In other words, let's say Site A has Phone1 for a 1FB line going into it on an FXO port. Site B has Phone2 for a 1FB line

Hi, all. The asterisk setup is working fine, receiving calls via broadvoice "initially". ? When call comes in via broadvoice number, asterisk picks it up and routes correctly, as long as the call came in within ~2 min from the previous one. In other words, as long as a call comes in within ~2 min since the previous one, asterisk will answer the call. However, if the call comes in

Hi, Actually on my setup all outgoing calls are going trhu a SIP unique account A have a second SIP account with another operator and I would like my setup to use alternatively each of the two accoutns Call 1=> Dial SIP/phone1 Call 2=> Dial SIP/phone2 Call 3=> Dial SIP/phone1 <...> If you have an sample please let me know

I am new to asterisk and need to dig up some info on how to set it all up. It looks a bit daunting especially all the options available in the .conf files. I have 2 SIP phones, GXP2000 and a budgettone 100. phone1 - 192.168.0.160/24 extension 1000 phone2 - 192.168.0.161/24 extension 1001 Server - 192.168.0.57 I get the following all the time, but can make calls between the 2 extensions,

Retrying, falling of the list some how :-( -------- Original Message -------- Subject: feeling n00b again Date: 2018-08-20 09:51 From: asterisk at a-domani.nl To: asterisk-users at lists.digium.com Hi all, Long time ago, I followed a Asterisk training, and both at work and at home, was able to deploy Asterisk, make all sorts of internal call (hard/soft voip-phones, incoming/outgoing,

What is the best way to create a drop down where the viewable text in a concatenation of 2 or more columns? For instance, I hane a lookup table with these columns. Model FOO columns: id , name, phone In my drop select tag, I''d like the user to see: "name1 phone1" "name2 phone2" etc.. I know I can do this using find_by_sql . .. But, isn''t there a more

I'm trying to get a basic Asterisk configuration together for ISDN incoming / outgoing calls. I have two Cisco 7905g phones working (at least talking to each other) and have purchased a NETjet-S PCI ISDN card for routing calls to / from ISDN. The state I've managed to get it to is:- -- Executing Ringing("SIP/PHONE2-d557", "") in new stack -- Executing

Hi, I am trying to implement the callback feature of our old phone system. This feature may go by a different name in asterisk? It worked as follows. If phone A called phone B and it was BUSY, you press a button to enable a callback. User A is free to continue work or make other calls. What this meant is that when both phones became free, phone A would ring, on answer it would call phone B