similar to: new cisco ip video phone?

Hi, Reporting from Astricon, Mark uploaded the 1.0 release while giving his speech a few mintues ago.. Bring out the champagne :) Lethol

Hi all, Anyone got a link or the file to Mr. Guy's notes from his speech at Astricon.. I looked for them or relevant info he showed ad FWD's webpage but have not been able to find them. He had a working FWD registered thru Asterisk behing a NAT and a couple of samples of their new scripts, talking weblog (from Mr. Pulver) and other cool new features. If anyone got these please send em

Hi, I recently bought a 7910. I found out too late that it would not do SIP as I initially thought. Anyway before ditchingit for a 7960 I wanted to try it out, I read that the guys at http://chan-sccp.sourceforge.net/ had done some improvements to the original chan_sccp driver and having 80% functionality with this model. I have not been able to compile their driver and keep getting the

Hi, I'm having a problem with one of our 7960. They all run latest 7.4 SIP firmware. The problem appears on the other end. The other end constantly hears a 'crackling' noise. I have tested using phone set, headset and speaker and the noise appears on all cases. I have other 7960 setup exactly same way (using same asterisk, firmware, etc) so it looks like a hardware issue.

I'm sure this a very common and easy thing to do with Asterisk, but for the life of me I can't find the application that will allow me to open a Zap channel. Real world example: To be able to connect to an open Zap channel, so it would allow me to say, join in on a call that was originally answered by a PSTN phone (ie. just like you would by simply picking up another PSTN phone..!).

I can call my Broadvoice DID from a outbound caller-id blocked phone, and BV happily delivers the CID to Asterisk (and then on to my IP phone display.) I've tested with the *67 prefix from a PSTN phone to make sure it was supposed to be blocked. The number is always correct, but sometimes the the caller ID name is set to something funky (like a CO or switch center name.) I *think* this

Hello, I use both ser/asterisk . In fact i wish asterisk to forward all the sip requests which are not handled by domain=domain.tld in sip.conf Here is a diagram: The sip agents use the Sip proxy as an outbound sip proxy and domain=domain.tld . When the sip agents dial sip:user@otherdomain.tld so the request is sent to sip proxy and so to Asterisk. I wish Asterisk to Look up the

I have installed a 6VPCI card from voicetronix's but i can't get astersik to use it! Now looking at the loaded modules the chan_vpb is not loaded- so I assume that is why it is not working. Now I modified my vpb.conf file and extensions.conf, have I missed something Has anyone a installation guide as I am very new to this!! I have had asterisk working with SIP extensions. by dowloading

Hi all, I used to have an OpenLine4 card, but decided against using it due to some problems with hangup detect. Does anyone on the list actively use Voicetronix's OpenSwitch12? What are your opinions on the card? Cheers, Flynn

Is there a soft phone for PocketPC or iPaq? If not, is someone working on it? I will be more than willing to contribute my mite if needed. Thanks, -- sudhir

when placing calls to the system through SIP, I got these messages, Dec 19 00:26:55 WARNING[5570]: channel.c:2571 ast_request: No translator path exists for channel type Zap (native 68) to 256 Dec 19 00:26:55 NOTICE[5570]: app_dial.c:1056 dial_exec_full: Unable to create channel of type 'Zap' (cause 0 - Unknown) any explanation for this? Thanks, -------------- next part -------------- An

Hello. We are using pxelinux for years to boot Linux via PXE since years. Since EFI is spreading, I changed configuration to be able to boot EFI systems. The "Client": - HP Proliant DL380Gen9 System FW: 1.21 11/03/2014, latest available - NIC used for booting: HP Embedded LOM 331i (Broadcom BCM 5719/ tg3), FW: 5719-v1.38 The Server: - ISC-DHCP with tfpd-hpa running on Debian 6.x -

Apparently asterisk's default way to a 3-way conference lets the user in the middle hangup and the other parties stay on the conversation. This is great some times but it creates quite a bit of problems when trunks dont have disconnect supervision or when trying to do accounting and billing on the user. Here is the 'normal' situation when a user tries the setup a 3 way conference once

Hello... Am 05.02.15 um 23:33 schrieb Geert Stappers via Syslinux: > On Thu, Feb 05, 2015 at 07:02:07PM +0100, Holger Baust wrote: >> Hello. >> >> We are using pxelinux for years to boot Linux via PXE since years. >> Since EFI is spreading, I changed configuration to be able to boot EFI >> systems. >> >> The "Client": >> - HP Proliant

On Fri, Feb 06, 2015 at 12:08:58AM +0100, Holger Baust via Syslinux wrote: > Hello... Welcome the Syslinux project! > Am 05.02.15 um 23:33 schrieb Geert Stappers via Syslinux: > > On Thu, Feb 05, 2015 at 07:02:07PM +0100, Holger Baust wrote: <snip/> > >> > >> NBP file downloaded successfully. > >> Getting chached packet > >> My IP is

Yesterday I upgraded my Zaptel to 1.2.26 or I think that was it, the latest 1.2 version at downloads.digium.com. I have a Digium 4 card populated with 4 red FXO cards using channels 1,2 and 4. Channel 3 is not used. It's been working fine for a few years. After upgrading to 1.2.26 calls stopped coming in on channel 1, Channel 2 still worked fine and I could get dialtone and make calls

On Sat, Feb 07, 2015 at 01:06:06PM -0500, Gene Cumm wrote: > On Fri, Feb 6, 2015 at 4:57 AM, Holger Baust wrote: > > Am 06.02.2015 um 07:44 schrieb Geert Stappers: > >>>> On Thu, Feb 05, 2015 at 07:02:07PM +0100, Holger Baust wrote: > >>>>> My IP is 0.0.0.0 > >>>>> Any suggestion / hint ? > >>>> The (IMHO) missing

Hi we've got Asterisk CVS-HEAD 18-Aug-04 (modified by Voicetronix as available on their site for use with the vpb driver) and an OpenLine4 (4xFXO). The same server also has two X100P. Calls on the Voicetronix card drop instantly when the called party picks up. The vpb driver reports that it detected a hangup (loop drop) yet there is no hangup when connecting the X100Ps or analog phones to

On Thu, Feb 05, 2015 at 07:02:07PM +0100, Holger Baust wrote: > Hello. > > We are using pxelinux for years to boot Linux via PXE since years. > Since EFI is spreading, I changed configuration to be able to boot EFI > systems. > > The "Client": > - HP Proliant DL380Gen9 System FW: 1.21 11/03/2014, latest available > - NIC used for booting: HP Embedded LOM 331i

Hi All I have recently downloaded Asterisk and was so impressed I thought I would setup a home server and I went out and got myself a couple of cisco 7940's. (and a sipaura 3000!). thanks to various posts on this list and the voip-info site I have managed to get chan_sccp setup and working with the 7940's but the I tried to get the messages, services and softkeys working. It seems