similar to: Asterisk on FreeBSD + Passive ISDN BRI

Have you thought about making them agents, they would both be reachable by dialing there agent number then, and I know only one agent can be logged in at once. Just a thought. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of asterisk-users-request@lists.digium.com Sent: Saturday, April 22, 2006 8:26 PM To:

Hi Guys! I got a Diva passive ISDN card and I can't get it work with asterisk 1.4, It is supported in the kernel as an isdn4linux device but I can't find "Modem" channel type when i type in: core show channeltypes. I'm guessing it is removed in asterisk 1.4. Tried with capi interface but it does not work :( Anybody got some idea how can i make it work or got a link to a

Has anyone got chan_misdn working with passive BRI cards yet? I've tried both hfc (hfcpci.ko) and w6692 (w6692pci.ko) cards, but when I start asterisk I get the following when chan_misdn is loaded: [chan_misdn.so] => (Channel driver for mISDN Support (Bri/Pri)) == Parsing '/etc/asterisk/misdn.conf': Found == Registered channel type 'mISDN' (This driver enables the

I have a North American BRI configured as National ISDN (NI-1) on an SBC (Nortel?) switch. SBC calls this "FastTrak ISDN", and it's surprisingly inexpensive -- less than two POTS lines. I've been trying to find an inexpensive PCI interface solution to connect this to Asterisk as voice lines. I prefer ISDN BRI over POTS lines because of the improved signalling, fast dialing,

Hello all. I have an ISDN passive card (HC HFC 2BDS0) using HiSAX driver (since this is a passive card, I can't use the CAPI driver... ). "All" I want is recieve faxes and store them on diferent folders depending the destination number. So far I was able to do a similar thing with voice (vbox), but what I really pretend is recieving faxes. My system is a SuSE 9.2 and has instaled

I am going to try and use a passive AVM fritz BRI card for my * setup.. Here is the thing.. I need to order my BRI from BT.. The service that looks to be the one to use is what they call ISDN 2e becasue this has the option to setup hunt groups across multiple ISDN2e lines so I could add another line later to get 4 channels.. According to the BT website in order to use the hunt grouping across

Hello, I need to connect one diva server 4bri to a portuguese BRI interface. The operator (PT) said that this bri is in point-to-multipoint mode (S0). Previously one PBX has connected to that interface. The asterisk and diva drivers are working ok but i cannot communicate to outside via this bri. Xlite gives me the message: "call failed: declined". Anyone have experience with this

I want to test asterisk with its DID functions on a smaller scale without the expense of a PRI. I am in the US, and want the most reliable/stable, and feature rich solution that I can have. What ISDN card would be reccommended? My clec switch operator says he can/will send DID info to my BRI's if I wish. Can Asterisk, or one of its addons support this? What BRI solution would be

Having ISDN FXOs and a bunch of ISDN DECT base stations, I went looking for a CAPI compatible active BRI adapter capable of NT mode. I have found that the 'Eicon Diva Server 4BRI' fulfills theses requirements. However, at EUR 1387 for four BRI interfaces, it does not come cheap. Are there other users of similar hardware that can point me to alternatives ?

Hello, I am using a system with an AVM ISDN PCI card (fcpci) and asterisk with chan_capi-cm-0.6. The hardware is connected to a Siemens Hipath 3550 PBX. As a BRI connection has 2 channels and allows 2 simultaneous calls, numbers/MSNs 6391 and 6392 were for provisioned for each channel. The system is working (partly, read on), the trick is the correct cable wiring and setup the PBX's port

Anyone actually got this working with asterisk ? I have read posts that it is possible with capi and the diva server cards. Regular diva and diva pro both claim to support NI-1 and NI-2 and CAPI - will they work as well ? Has anyone actually got it working ? Forget the should and could part, I only care about the does/doesn't and why. If you have it working, please tell me - telco,

Hi, Anybody have lots of experience with PCI ISDN cards and Asterisk? I'm thinking of getting a BRI in my house to deliver more advanced signaling to my PBX (yes, I'm a geek :-)) but I've never played with isdn4linux. Is there any particular BRI card that works better with Asterisk than any other? Also, can the BRI interface cards participate in conference, etc., since they

Hello Group, Current Setup: - Eicon Quad BRI ISDN Card. - 4 ISDN BRI (Telco: Telstra) Onramp2 services. - Mode: Point2Point. - 100 Indial Number ranges. Full National Number (9 digit format): BAAAAAAXX where: B (Area code): 2/3/7/8 A (Normal Numbers) X (99 Indial extensions) eg: BAAAAAA00 BAAAAAA20 etc Requirement: - To be able send Indial numbers as Caller ID when dialing out. Configration:

Hello everyone, I'm using very simple setup to make and receive external ISDN calls through a softphone (x-lite version 3.0 - Win32) via an asterisk box. Hardware setup: - Dialogic Diva BRI (lspci yields: Network controller: Eicon Technology Corporation DIVA Server BRI-2M/-2F (rev 01)) - ISDN BRI line Software setup: - Redhat 9 - asterisk-1.4.16.2 - chan_capi-1.0.2 Asterisk configuration

this happened to me on a cvs update, rebuilt a clean chan capi cm and all is well. Greg ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Voicomm User Sent: Monday, September 19, 2005 3:29 AM To: Armin Schindler Cc: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Asterisk ISDN: Problem

I was incorrect in a previous email... The situation in question is this: Asterisk <---BRI---> PBX <---BRI---> PSTN There are Samsung extensions on the PBX and SIP extensions on Asterisk. I want to be able to use TAPI to initiate dialling, and the PBX has no such feature so Asterisk must initiate it. For an Asterisk initiated call from a PBX extension to a PSTN number, this works as

Roberto Thanks. Panasonic KX-TD1232 system ISDN interface use DDK plug, not same cord you are using for openvox B400P card. Each port could be configured as CO or extension port as Point-Point or PTMP in both mode. Regarding to dial timeout these it becomes from ISDN dial mode overlap or En-bloc, by the way you can close dialling number by using # key. Best regards Mc GRATH Ricardo E-Mail

We are looking to lose the TDM400P in favor of an ISDN-BRI solution. This should get rid of static on the line (at least any static generated by our half of the circuit), right? I am a total virgin to ISDN. I understand that we need two BRI circuits to provide four voice channels, and that the hardware to speak to the BRI circuits can be passive or active, with the active type being much more

Hi all, I am trying to do Xen / Kernel profiling. So I tried passive domain profile with oprofile tool in Dom0 as below. * Environment 1 + i7-2600 CPU + XCP 1.6 Base ISO + CentOS 6.3 Guest (HVM,PV) * Environment 2 + i7-2600 CPU + Xen hypervisor 4.2.1 + Konrad''s passive domain profiling patch applied Dom0 Kernel ( 2.6.32 jeremy branch & 3.2.44 mainline kernel) + CentOS 6.3

Hi, I have done my best and tired of searching the net about the problem. If anybody could help would be a great favour. Description of Problem ------------------------ I am trying to install two Netpci cards(Traverse Technology Netjet ISDN-s) on Trixbox 2 and aim is to use in Asterisk as dailin and dialout. I compliled the driver as directed in the manufacture manual. After installation dmesg