Displaying 20 results from an estimated 6000 matches similar to: "Using prepaid calling cards to dial out with Asterisk - extensions.conf"
2005 May 13
1
IAX2 and FWD - Wrong context?
Greets all,
I'm setting up asterisk and trying to get IAX2 running for FWD. I followed
the FWD IAX2 page verbatim but I get the following error.
May 14 08:09:31 WARNING[7569]: chan_iax2.c:5569 socket_read: Call rejected
by 65.39.205.121: No such context/extension
The rsa key is in, that's the only error I'm seeing when I try calling out
with this. I haven't tried inbound yet.
2002 Oct 05
0
R-1.6.0 for Darwin
I don't think it is necessary to put binary versions of the Darwin/X11
version on CRAN any more. The current sources compile without
problems on both Mac OS X 10.1 and 10.2, using either gcc/g77 2.95.2 or
gcc/g77 3.1, or f2c. It seems to me that
if you are using R from the command line, using X11, that you are
sophisticated enough to install the tools below. And, if you want
to install and
2002 Aug 19
0
[Fwd: LispStat, R and ViSta [was: Re: Status?]]
Byron
I meant there is no native (Aqua) version of GTK yet (there is
wxWindows and Qt and Tk, so
possibly GTK will follow). The X11 version of RGtk works for me too. I
agree with your
diagnosis of the GUI problem.
Best -- Jan
On Monday, August 19, 2002, at 12:08 AM, Byron Ellis wrote:
>
> On Monday, August 19, 2002, at 12:09 AM, Jan de Leeuw wrote:
>>
>
> I accidentally
2002 Nov 15
0
survreg (survival) reports erroneous results for left-censored (PR#2293)
Thank you for looking into this so quickly. As you correctly surmise,
I was using the Carbon version of R-1.6.1 on Mac OS 10.2.2 (Jaguar)
when I got the "wrong" answers.
One other observation: The right censoring seems to work fine.
Thanks again,
Tim
On Thursday, November 14, 2002, at 11:09 AM, Jan de Leeuw wrote:
> I take that back. I now get the "correct" result
2003 Aug 17
2
R-devel problem
With the current version from rsync (8/16, 19:00) I get
make[3]: *** No rule to make target `helpsearch.c', needed by
`Makefile'. Stop.
make[2]: *** [R] Error 1
make[1]: *** [R] Error 1
make: *** [R] Error 1
===
Jan de Leeuw; Professor and Chair, UCLA Department of Statistics;
Editor: Journal of Multivariate Analysis, Journal of Statistical
Software
US mail: 9432 Boelter Hall, Box
2003 Aug 17
2
(no subject)
RAqua now builds fine, but for some reason tcl/tk support cannot be
compiled in.
I get
checking for /Library/Frameworks/Tcl.framework/tclConfig.sh...
/Library/Frameworks/Tcl.framework/tclConfig.sh
checking for /Library/Frameworks/Tk.framework/tkConfig.sh...
/Library/Frameworks/Tk.framework/tkConfig.sh
checking whether compiling/linking Tcl/Tk code works... no
This is with
configure
2002 Dec 26
3
BLAS/Lapack on OS X
R-devel has the --with-lapack flag for configure. If you build R with
--with-blas="-framework vecLib" --with-lapack="--framework vecLib"
then the build goes through, using the native optimized BLAS and
Lapack in /System/Library/Frameworks/vecLib.framework. Also, it
works, in the sense that it does eigenvalue problems correctly.
I don't have any timings yet, because I
2003 Oct 18
1
libR.dylib on OS X
If one installs the CLI and RAqua versions, by saying both "make
install"
and "make install-aqua", then packages that use libR.dylib get their
symbols from
/Applications/StartR.app/RAqua.app/Contents/Frameworks/libR.dylib
and not from /usr/local/lib/R/bin/libR.dylib.
That's unfortunate, because the first is likely to change, and the
second is not.
For instance, what
2004 Apr 24
2
R-devel from rsync 04/23
I see something new and unexpected here.
> update.packages()
trying URL `http://cran.r-project.org/src/contrib/PACKAGES'
Content type `text/plain; charset=iso-8859-1' length 163467 bytes
opened URL
.......... .......... .......... .......... ..........
.......... .......... .......... .......... ..........
.......... .......... .......... .......... ..........
.........
downloaded
2002 Oct 06
1
R-1.6.0
I have build R-1.6.0 on Jaguar (actually on 10.2.2), using gcc 3.1
from Apple, g77 3.1 from fink, ATLAS from fink. It passes all
checks OK.
I also re-compiled the 233 packages listed below
with the same setup. I have NOT tested all these
packages in any detail. A tar.gz file with the whole /usr/local/lib/R
will be on ftp://gifi.stat.ucla.edu on Tuesday. It will NOT include
anything from fink
2002 Aug 22
1
RXLisp
I was obviously fascinated by Duncan's earlier message on RXLisp.
I managed to build a working version of RXLisp for OS X, by some
unabashed and rather uninformed hacking. I compiled XLISP-STAT using
the gcc flags -fno-common and --no-cpp-precomp (not sure if they
are necessary or not, they are part of an older hack). I "make
libxlisp.so", using Duncan's replacement for the
2002 Jan 27
2
Journal of Statistical Software
JSS, which is at http://www.jstatsoft.org, publishes statistical software
with manuals, as well as papers describing, comparing, and evaluating
statistical
software. Abstracts of all contributions accepted in JSS are published in
printed form in JCGS.
Although we publish software written in any language, we especially
welcome software written in R. The general idea is that packages written
in R
2002 Jan 27
2
Journal of Statistical Software
JSS, which is at http://www.jstatsoft.org, publishes statistical software
with manuals, as well as papers describing, comparing, and evaluating
statistical
software. Abstracts of all contributions accepted in JSS are published in
printed form in JCGS.
Although we publish software written in any language, we especially
welcome software written in R. The general idea is that packages written
in R
2002 Oct 30
2
native OS X R
I have a version of R-devel which is configured with the flags
configure
--with-tcl-config=/Library/Frameworks/Tcl.framework/tclConfig.sh
--with-tk-config=/Library/Frameworks/Tk.framework
/tkConfig.sh --enable-R-shlib --with-aqua --without-x
TCLTK_LIBS="-framework Tcl -framework Tk"
TCLTK_CPPFLAGS="-I/Library/Framewor
ks/Tcl.framework/Headers
2007 Oct 03
0
Foometrics in R
At www.jstatsoft.org we now have three special volumes
Volume 22, Ecology and Ecological Modelling in R (Thomas Kneib and
Thomas Petzoldt, eds.)
Volume 20, Psychometrics in R (Jan de Leeuw and Patrick Mair, eds.)
Volume 18, Spectroscopy and Chemometrics in R (Kate Mullen and Ivo
van Stokkum, eds.)
Coming soon
-- Econometrics in R
-- Political Methodology in R
Gleam in my eye
--
2002 Jan 12
0
cran.stat.ucla.edu
After taking the holidays off, the CRAN server at
http://cran.stat.ucla.edu is back.
You can get additional (non-CRAN) materials for Darwin/X11 at
ftp://cran.stat.ucla.edu/pub/R.
===
Jan de Leeuw; Professor and Chair, UCLA Department of Statistics
US mail: 8142 Math Sciences Bldg, Box 951554, Los Angeles, CA 90095-1554
phone (310)-825-9550; fax (310)-206-5658; email: deleeuw at stat.ucla.edu
2006 Jun 19
1
Foometrics in R
One of the outcomes of useR! 2006 is that JSS is planning to publish
a series of special volumes. They will be guest edited (I have guest
editors already, although somewhat tentative in some cases). Each volume
will have 5-10 issues (articles) of the usual JSS format.
Psychometrics in R
Political Methodology in R
Econometrics in R
Social Science Methodology in R
Spectroscopy/Chemometrics in R
2002 Jul 03
0
Fwd: RMySQL and Mac OS X
Begin forwarded message:
> From: Arno Ouwehand <arno at stat.ucla.edu>
> Date: Wed Jul 3, 2002 16:00:54 America/Los_Angeles
> To: fernando.pineda at jhu.edu
> Cc: deleeuw at stat.ucla.edu
> Subject: RMySQL and Mac OS X
>
> I got it working, initially I had the same problem (using R1.5.0 and Mysql-3.23.49 )
> Then I installed the R 1.5.1 MetaPackage from
2002 Oct 12
0
tkrplot
The package tkrplot now works in OS X (Jaguar). The
core of the problem is that the load function in tcl does not accept
bundles, but needs dynamic libraries (I verfied this using the
native version of tclsh and Wish). But the config files in
the tkrplot package (as in all packages) build bundles, not
libraries. Thus I said in the src directorry of the tkrplot package
gcc -dynamiclib
2002 Oct 12
0
RXLisp
So far, I had made RXLisp by putting all foo.o from XLISP-STAT in
an archive, and linking that into RXLisp.so. I have gotten somewhat
further in using dynamic libraries. Here is what I now do.
in XLS
1. Copy xlisp modifications from RXLisp
2. configure --host=powerpc-apple-darwin6.2
3. make libxlisp.so CC="gcc -fno-common -L/sw/lib -I/sw/include"
4. gcc -dynamiclib -flat_namespace