similar to: ShoreTel 210 MGCP phone drops calls with MGCP RSIP

Okay, so I'm a noob. Asterisk looks very promising, so I say "thanks" and "good job" to all who contribute. My * test box is up and running with soft phones using IAX and SIP, so now I'm on to testing hard phones. I borrowed a couple ShoreTel 210 phones from somebody who had them on hand but they only support MGCP. I see that there's an mgcp.conf in

I'm trying to use a 4 port ATA that was designed for use with MGCP 1.0 / NCS 1.0 -- is the channel_mgcp compat with NCS -- anything I can do to make it compat?? This is what happens - below *CLI> mgcp reload Reloading MGCP == Parsing '/etc/asterisk/mgcp.conf': Found Use EXIT or QUIT to exit the asterisk console == MGCP Listening on 10.1.22.39:2427 == Using TOS bits 0 mgcp

Hello everybody. I have a problem with an integration between an Asterisk (1.4.24.1) on FreeBSD 7.0 and a Shoretel 7.5 server. To make a very long story short, when someone behind asterisk call an extension behing shoretel everything work as expected. When someone behing the shoretel server call someone behind asterisk the first 10 seconds of the call seems ok but then the line is dropped

I've been anxiously awaiting ShoreTel version 6 because of it expanded use of SIP. My plan was to upgrade out ShoreTel server at our main office to version 6, and use Asterisk in our small remote offices, and have them all be able to directly dial each other's extension. (i.e. CEO in main office can dial ext 401 and get directly to secretary at small remote office, and vice-versa)

Hello All, Here's the problem, we have happily set up several Asterisk servers to offer commercial service in the UK, our wholesale SIP termination partner (Magrathea - use SER/CiscoGW to provide us the service on a public IP address) - till now we have used Asterisk to connect clients on private IP's with Asterisk doing the required conversion for SIP/IAX between public and private

We have a Shortel system at out main site. We're putting Asterisk servers at several smaller remote sites. I know I'll be able to get the Asterisk servers to talk to each other via IAX, but can they talk to the Shoretel server? Basically, I'd like to be able to, from the main site with Shoretel, dial an extension, and reach that phone at a remote site, and vice-versa. Thank

Hi, Someone who has had experience with shoretel VoIP systems, can you please give me a run down of how Asterisk is either better or worse? I am completely unfamiliar with Shoretel systems, but someone had suggested we look into them. I said, you bring your Shoretel features, and I'll show you 10 things Asterisk does or can do that Shoretel doesn't do. I still believe that's

I know this is not the most appropriated list to this, but I will try: Does anyone know what is the criteria to the generation of the transaction identifiers in MGCP? I mean, are they generated by a randomic method? I'm using Asterisk and MGCP eyeP Phone and observed that the RSIP and NTFY (methods created by the gateway) use high values in the transaction identifiers, while the RQNT, AUEP,

Does anybody has the expirience configuring Asterisk with Cisco ATA 186 MGCP firmware ? I have Cisco software v3.1.1 atamgcp (Build 040629A) Asterisk 1.0-RC1 On ATA i only put domain test. mgcp.conf looks like this [test] host = 192.168.195.55 context = default line => aaln/2 line => aaln/1 Asterisk CLI shows this: Jul 31 16:05:40 WARNING[135449600]: chan_mgcp.c:485

I'm not sure that the problem lies in the NAT because the phone is talking to Asterisk. I'm hoping this is a simple config thing I've overlooked but I've tried all kinds of combos inside the [] in my mgcp.cfg file. The phone's IP is 192.168.1.116 (my comp is .110). The router to which the phone and my comp is plugged into has a WAN IP of 10.0.0.28. All the other comps (and SIP

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Does anyone know what I need to put in the mgcp.conf to connect to an adit 600? Also if you know what I need to configure on the Adit600 itself, that would help too. - --Tod -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

Hi, I have been testing sieve in my setup with qmail-ldap and deliver on a LAN with an artificial domain name. Everything seems to be working as expected, except in cases when autoreplies (vacation, reject messages) need to be tested. The domain name is vmint, and dawnone is the hostname on which mail server is setup, so a users have address like cot at vmint, cute at vmint and dove at vmint *

We are using an MGCP configuration. There seems to be some incompatibilities between our Netergy T2 VOIP chip and Asterisk. This is how our Vendor sees it: Here's what I see. 1. The first call is initiated. (CRCX) The interesting thing here is that the CA (Call Agent) tells us to go directly into sendrecv mode which means that we start streaming audio immediately. All other CAs that

Hi, I have recently upgraded a system with a Samba BDC, PDC and a couple of member servers from 3.2.14 to 3.4.9 (and also tested with 3.5.6). There appears to be some problem with Winbind (we need to run it on all servers as we have a trust relationship to a domain at another office). I have an Idmap range set up in our LDAP database. With 3.2.14, all worked well. The Idmap ou would be

I have a client who is using a Shoretel PBX. This PBX apparently does not send DTMF information OOB, but instead sends this inband via the B-channel. This is traversing an Asterisk box via a PRI. The user calls the IVR (1-800-CALL-DHL), receives audio, but is not able to present DTMF to engage the IVR. With some light research it appears that the DSP is not activating until the call is

Dom0 is Wheezy 64 bit with kernel 3.2.0-1-amd64 version 3.2.4-1, xen from xen-unstable.hg changeset 24858:a88ba599add1 plus these patch for not fail build: http://xen.1045712.n5.nabble.com/PATCH-0-of-2-rename-libxl-yajl-gen-alloc-td5469362.html And also this change for lib patch modified with multiarch support: vi config/StdGNU.mk LIBLEAFDIR_x86_64 ?= lib DomUs PV working, domUs with

SIP user => Asterisk 1.6 server => SIP Trunk => external destination: works AMI script => Asterisk 1.6 server => SIP Trunk => external destination: Failed to authenticate on INVITE to '"asterisk" <sip:asterisk@(ipaddr)>;tag=alphanumeric' I?ve tried doing things like ?include => contextwithtrunk" in various places, googling, re-reading relevant

Hi I've a mgcp fon (swissvoice IP10s) behind a NAT router. Configured is NAT for both in/out going on port 2427. Now I got the following mgcp debug messages when i try "mgcp audit endpoint <endpoint>" ---------------------------------- from 172.16.98.57:2427 Verb: 'RSIP', Identifier: '5346', Endpoint: 'aaln/1@[192.168.2.3]', Version: 'MGCP

Hi everyone, I am fairly new to the idea of VoIP, although I've been reading about it off and on for the last few years. Now it is starting to look mature enough to consider implementing it, but there is one thing that I haven't been able to get a clear answer on... With Vonage, you are using the Vonage network - it is their responsibility to route your call to the endpoint, which is

Hey, all. While ADA can still be downloaded, that's about all that I see. No development, no recent mention, and -- perhaps worst of all -- it appears not to work properly under 64-bit systems. So, assuming Digium's abandoned it, are there any suggestions of alternatives? Right now, I'm replacing a Shoretel system, and I'd *dearly* love to avoid the incredibly fat client they