similar to: Tyan Transport GX28 with TDM400

We have been seeing failures with CentOS 4.4 i386 (not x86_64) running compute-intensive programs on Tyan K8SRE (S2891) Tymotherboards, running Opteron 265's. This motherboard is used in the Tyan barebones box GT24 (B2881). We have these boards populated with 8GB of RAM, consisting of mixed 2GB and 1GB sticks. The symptom is that CPU-bound programs (may or may not be related to floating

OK... maybe I got a little anxious and ran out and bought a Tyan GX28 with dual Opteron (dual core) processors. (It is a nice server ;) ) I did neglect to find out that you can not manually set the IRQ's on this motherboard. I am now stuck sharing an IRQ with the ethernet controller and no foreseeable end to my dilemma. I have a Digium TE210P and zttest consistently runs at 99.97% which

Kexec / Kdump - xen-3.0.4-testing-13098 Kexec Kexec Kexec Kexec Kdump Hardware Xen -> Xen -> bzImage -> Xen -> Xen -> Arch Platform Xen bzImage Xen vmlinux vmlinux i386 A PASS PASS PASS PASS PASS i386 B (VMX) PASS PASS PASS PASS

I've been checking out this and like the looks of it. http://www.tyan.com/products/html/gt24b2891.html I was told the onboard SATA RAID controller can only be used by windows. However, others have told me that there is no problem using it with linux. Anyone used the Tyan Transport GT24 (TYAN Thunder K8SRE s2891 motherboard)? Good choice for a CentOS server? Thanks, Josh

We have a number of clients who will be needing a server to host Asterisk on. Many of these clients use analog (FXO) lines that will need to be connected to Asterisk via Sangoma cards. Can anyone recommend an industry-standard server (like IBM, Dell, HP, etc.) that has enough open PCI slots to handle up to six of the Sangoma cards? We would like to be able to tell the customer to just go

Hi folks, an Asterisk (www.asterisk.org) box will be built with the following specs and I wanted to know if CENTOS has a built process/config/parameter/special distro to target the AMD Opteron Dual Core plataform: 2 amd opteron 265 dual core 1.8 Ghz 2mb l2 cache 2x1024 ocz c2-6400 dual channel gold GX XTC 2 Seagate 16mb cache 300 GB barracuda 7200 drives another 2 Seagate 500 GB 16mb cache

A couple of months ago I reported some problems with a batch of Tyan K8SSA (S3870) based machines. We are continuing to have an odd problem with these boxes, and if anyone has seen something similar elsewhere, I'd appreciate hearing about it. These boxes are running Centos 4.4 x86_64 with kernel 2.6.9-42.0.3.ELsmp. They are dual Opteron 265's (dual core) with 4x2GB DIMM's. The

Was wondering if anyone has any luck with the Tyan s4985 motherboard, I had loaded up the latest 5.4 release and in installed most everything that I wanted but when I loaded it up, as in processor wise it would lock up. Funny thing I could still ssh to it but not do a su - or anything from the console. I think it is kernel related and tried the previous kernel but it still exhibited the same

I am trying to install CentOS to a server that has a Tyan S2891 motherboard, 2 Opteron 875 Dual Cores and 2GB of RAM. I have been able trying to install over a network but the tg3 driver will not load. I then installed from a DVD and on rebooting after the installation I cannot get the network drivers to load and the RAID controller in the PCI slot is not available. It seems that when I do an

I had my eye on the Tyan dual-Opteron mobos for awhile. I tried to find a posting *anywhere* sharing experiences with these boards under Linux. No such luck. So placing myself under the heading "Where Angles Fear to Tread," I went ahead and built a system anyway. Here's what I've learned. The specs: Tyan Thunder K8SE S2892, BIOS 1.01 2x Opteron 270, 2Ghz Dual-Core, retail

We're having problems with FreeBSD 5.4, 6.0, and 6.1 and an ICP Vortex GDT8546RZ 4 port SATA RAID card in a Tyan S2460 system with dual AMD Athlon MP 1600+ CPUs. We do not have any problems with this configuration under FreeBSD 4.11, and we have the same ICP cards in Tyan based Opterion system (S2882 and S4882) run with out problems under FreeBSD 5.4 and 6.1. We can reproduce the problem on

Has anyone installed Linux (CentOS or other) on a Tyan K8SE (S2892) motherboard? I'd really like to hear your experiences -- with this board or Nvidia's nForce Pro chipset in general. I'm looking to build a new server using this board but would like to find some other experiences first. I've googled myself blue but haven't found any reviews or postings regarding this

I tried updating the BIOS on my K8WE (S2895) yesterday to 1.03, but after the update, FreeBSD (RELENG_6 dated March 26) would randomly freeze after booting. As I was updating from v1.01, I suspect it may be the updates to the nVidia SATA firmware that caused the issue, as things generally froze shortly after the background fsck processed kicked in (with, obviously, the exception of the first

My setup is as follows: Motherboard: Tyan S2895 CPU: Two Opteron 275s Memory: 4 GB Disk: Three 250 GB SATA drives attached to a 3Ware 9500S-4LP RAID card Video: Nvidia GeForce 7800 The only hardware that I have added to the motherboard is the 3Ware card and the Nvidia card. The disks are configured as a RAID 5 array, and the machine boots from this array. I installed CentOS 4.2 x86 on this

Hi, I was wondering if anyone had any problems with the Dell 1800 series servers, with TDM400 cards? I saw that digium seems to recommend against a lot of the dells. Please let me know Thanks Sascha -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050802/d8219499/attachment.htm

Tyan has posted a lm_sensors config file for the Thunder K8SE S2892 at ftp://ftp.tyan.com/software/lms/lms_s2892.conf However when I ran the sensors command on my S2892 I was getting a readout for an adt7463 chip that wasn't referenced in the config file. I emailed Raphael Deng at Tyan asking him to confirm the manual edit needed to get sensors.conf to refer to the adt7463 chip. His

I have a Tyan Thunder K8HM (S3892) motherboard and I am trying to get lm_sensors to work with it. The problem is that I am getting conflicting information. The source for lm_sensors says not to compile the modules for the 2.6 kernel. The information from Tyan says that I need to compile the modules if my kernel is less than 2.6.12. Has anyone here configured lm_sensors for this motherboard?

Trying to get cpu temps from lm_sensors for a Tyan s4985 motherboard, just installed centos 5.4. Tyan release some lm_sensors conf files and other information which I have done, but I am not getting any cpu temps. I was wondering if anyone out there was running this board and if you have gotten temps working for your cpu, here is my output...Thanks in advance. w83627hf-isa-0c00 Adapter: ISA

It is amazing to me at this point that there is not an official Digium list of supported servers (including 1u models!). Clearly the number 1 issue with the Digium PRI cards is the server that they are used in. The new cards even go as far as listing server that DO NOT work on the Digium site! The wiki references are old and do not have any testing parameters. C'mon guys! Certify a

Good Afternoon, I have an Asterisk box that is acting like it is passing "core show" before every command I type. For example, if I type sip, I will get "No such command 'sip' (type 'core show help sip' for other possible commands). Any ideas? -- -jayson