similar to: realtime sip show peers no nat

Hello, I have found asterisk is dialing a random number when it recieves a call, would anyone know why? The first thing I noticed found peer 4563 (this is a n Xlite Client) Many thanks, Spencer SIP Debugging Enabled spitfire*CLI> <-- SIP read from 82.70.154.145:5060: INVITE sip:448715046363@iptel.tgfslp.dalmany.co.uk SIP/2.0 Max-Forwards: 10 Record-Route:

Hello, I've recently been given domain over a number of supermicro storage servers using Broadcom / LSI SAS2004 PCI-Express Fusion-MPT SAS-2 [Spitfire] (rev 03) to run a bunch of SSDs. I was attempting to do fresh installs of CentOS 8 and have come to find out that RedHat deprecated support for a number of HBAs for 8 including all running the SAS2004 chip. Does anyone know if there is a

On 20/09/2020 04:16, Akemi Yagi wrote: > On Sat, Sep 19, 2020 at 8:04 PM William Markuske <wmarkuske at gmail.com> wrote: >> >> Hello, >> >> I've recently been given domain over a number of supermicro storage >> servers using Broadcom / LSI SAS2004 PCI-Express Fusion-MPT SAS-2 >> [Spitfire] (rev 03) to run a bunch of SSDs. I was attempting to do

I am using Samba for a file server and get a lag when accessing files across the network, I assume it is due to inactivity, because the first file I access takes the longest to access, and then other files I access immediatly after are much faster. If I do not access any files for a while I get the problem again. It all works well, but I would really like to get rid of this Lag when opening a

On Sat, Sep 19, 2020 at 8:04 PM William Markuske <wmarkuske at gmail.com> wrote: > > Hello, > > I've recently been given domain over a number of supermicro storage > servers using Broadcom / LSI SAS2004 PCI-Express Fusion-MPT SAS-2 > [Spitfire] (rev 03) to run a bunch of SSDs. I was attempting to do fresh > installs of CentOS 8 and have come to find out that RedHat

Hi ! I hope this is the correct place to ask questions ... I'm having the following problem : A "service" on an NT 4 server cannot connect to a samba share on my linux machine. The specific versions are given below. From the NT machine I have no problem as the administrator to login to samba server and view the target share. The supplier's service however cannot

Author: ayznaga Repository: /hg/zfs-crypto/gate Revision: e3fd1c8e561df6513f95dba9c1ab58f4690d3354 Log message: PSARC 2005/738 SSG-Availability Feature Set 2 APR PSARC 2005/748 FMA for UltraSPARC DataPath 6229087 SPARC CPU/Mem DE should track DIMM serial numbers on Serengeti/Starcat 6281100 RFE: AVL-FS2: Support Anchored Page Retire for LW8, Serengeti & Starcat platforms 6281113 RFE: AVL-FS2:

Is there a library that is able for example to 1. merge 2 dataframes by row eg.: rbind(dataframe1, dataframe2):data.frame 2. delete a column from a dataframe del(dataframe, colname) or del(dataframe, colindex= 1):data.frame? 3. Select lines from a dataframe by a specific function ? select(dataframe, func=small(x){x<1}, colindex=3): data.frame? 4. converting all double columns of a data.frame

When doing a "sip show peers" I might see something like: Name/username Host Dyn Nat ACL Port Status devcentos5x64_to_mmfirepa 192.168.1.177 5060 Unmonitored devcentos5x64_to_bt610tMM 192.168.1.159 5060 Unmonitored devcentos5x64_to_am2mm/de 192.168.1.178 5060

Hi! I encountered some things trying to build own packages under Windows 2000 for which i found no answer in the documentation. First. 1. I do not found the rcmd.exe in the bin directory of R_HOME. I installed R using the setup.exe 2. I updated the R intatllation with one of the zip files. (rw1041sp.zip) now i had the rcmd.exe in the bin. 3. I do not found any hint in the docu that perl is

I have a vector with about 100.000 values representing a quite regular function (sinusoid like). I would like to find all local maxima of this function (should be about 4000). Is there a native routine for R? Thanks in advance Eryk. -- _|_ \|/ \|/ Eryk Witold Wolski tel :0049-(0)30-8413-1543 w w ?v? 'v? \'v'/ MPI Moleculare Genetik fax :0049-(0)30-8413-1139 |

Hi all, What does (T) mean on the output of "iax2 show peers"? The following my output. darkstar*CLI> iax2 show peers Name/Username Host Mask Port Status ronaldo (Unspecified) (D) 255.255.255.255 0 UNKNOWN sp/ata 201.26.67.102 (S) 255.255.255.255 4569 (T) UNKNOWN 2 iax2 peers [0

https://bugzilla.samba.org/show_bug.cgi?id=4561 ------- Comment #5 from sites-samba@carlthompson.net 2008-05-07 20:19 CST ------- See bug #5448. -- Configure bugmail: https://bugzilla.samba.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact.

What happened to "sip show peers" in 1.4.13? Jerry

Dear colleagues, I would like to have GAM regression lines (package gam) thicker than the default setting does. Is there any way to change the width of regression line when plotting gam.objects from the package GAM with more than one predictor? Changing lwd parameter in plot function controls all line components, including points making them thicker as well, which is not what I would like to

Hi people, pls does anybody know what "(T)" and "(D)" letter means? server3*CLI> iax2 show peers Name/Username Host Mask Port Status SERVER1 xxx.xxx.xxx.xxx (D) 255.255.255.255 9785 (T) OK (29 ms) SERVER2 xxx.xxx.xxx.xxx (D) 255.255.255.255 4569 OK (95 ms) 2 iax2 peers [2 online, 0 offline, 0

Hello. >> ubuntu*CLI> sip show peers >> Name/username Host Dyn Nat ACL Port Status >> voipprovider xxx.xxx.xxx.xxx A 5060 Unmonitored I've ben trying to connect an asterisk server to a voip provider, and I'm currently wondering what the 'A' in the ACL field of the 'sip show peers' command might

https://bugzilla.samba.org/show_bug.cgi?id=4561 ------- Comment #1 from matt@mattmccutchen.net 2007-11-04 14:51 CST ------- Created an attachment (id=2960) --> (https://bugzilla.samba.org/attachment.cgi?id=2960&action=view) Implementation of --tweak options Here, finally, is an implementation of the --tweak options! Now that bug 5051 and the omission of mtimes from unchanged_attrs

Hi, I swear I have read almost all the posted messages about this issue, but it's evident I couldn't find an answer (surely esay) to my problem. What I want is the following: Make 8 days aggregates from a daily series like this (dput output): structure(c(6.91777181625366, 0.79051125049591, 9.00625133514404, 9.86966037750244, 14.4326181411743, 3.70155477523804, 9.67768573760986,

hello all, I would like to introduce a summary table into the pdf along with the plots (in order to archive my data into single files automatically). Similarly, It would be great to have the result of the statistical analysis (for instance anova) in the same file. Is there a way to do that? example: pdf("example.pdf") layout (matrix(1:2,1,2)) plot (groups, scores) Result <-