similar to: Asterisk with ShoreTel 210 (MGCP)

I've got a ShoreTel 210 MGCP phone drops calls. My packet capture indicates that the phone may be trying to renew its registration with *, but reports Restart Method of Disconnected (frame 2), then * seems to take that as a sign that it has lost the connection and closes things down. The phone, meanwhile, seems to think it can continue the conversation until a few ICMP "port

We have a Shortel system at out main site. We're putting Asterisk servers at several smaller remote sites. I know I'll be able to get the Asterisk servers to talk to each other via IAX, but can they talk to the Shoretel server? Basically, I'd like to be able to, from the main site with Shoretel, dial an extension, and reach that phone at a remote site, and vice-versa. Thank

I have a DG-104S (which I reset to factory settings, it's DHCP'ing off my network, plugged into the WAN port). The system comes up, and I through the web browser set under Call Agent IP Address to: Notify Entry: dlinkgw@[192.168.1.1]:2427 (192.168.1.1 is the * server) I have RGW Name: and DNS IP addres the DNS IP of the MGCP box and DNS State disabled (not sure what to set it to) --

When I try to connect to * using a Cisco ATA 188 configured with a MGPC firmware (v3.1.1), I just keep getting this message every 30 seconds or so : May 10 10:08:21 NOTICE[7913]: chan_mgcp.c:1509 find_subchannel: Gateway '192.168.1.27' (and thus its endpoint '*') does not exist Using tcpdump, I have checked that the ATA188 (with IP 192.168.1.27 and port 2427) sends UDP packets to

Hi. I'm new in Asterisk with MGCP. I set up a MGCP user agent and start asterisk with the next configuration files. '--------------- extensions.conf ---------------------------------------------------- [general] static=yes writeprotect=yes [globals] ap1 => mgcp/aaln/ap200@64.76.148.186 [macro-apl1] exten => s,1,Dial(${ARG1},30,Ttmr) ;exten => s,2,Voicemail(u${MACRO_EXTEN})

Does anybody has the expirience configuring Asterisk with Cisco ATA 186 MGCP firmware ? I have Cisco software v3.1.1 atamgcp (Build 040629A) Asterisk 1.0-RC1 On ATA i only put domain test. mgcp.conf looks like this [test] host = 192.168.195.55 context = default line => aaln/2 line => aaln/1 Asterisk CLI shows this: Jul 31 16:05:40 WARNING[135449600]: chan_mgcp.c:485

Hello everybody. I have a problem with an integration between an Asterisk (1.4.24.1) on FreeBSD 7.0 and a Shoretel 7.5 server. To make a very long story short, when someone behind asterisk call an extension behing shoretel everything work as expected. When someone behing the shoretel server call someone behind asterisk the first 10 seconds of the call seems ok but then the line is dropped

I am trying to dial a mgcp extention from my sip phone and i am getting this error message. anyone got any idea? error I> -- Executing Dial("SIP/2204-5dc2", "MGCP/aaln/1@10.0.1.150") in new stack May 19 22:30:01 NOTICE[1251156800]: chan_mgcp.c:1104 find_subchannel: Gateway '10.0.1.150' (and thus its endpoint 'aaln/1') does not exist May 19 22:30:01

I've been anxiously awaiting ShoreTel version 6 because of it expanded use of SIP. My plan was to upgrade out ShoreTel server at our main office to version 6, and use Asterisk in our small remote offices, and have them all be able to directly dial each other's extension. (i.e. CEO in main office can dial ext 401 and get directly to secretary at small remote office, and vice-versa)

Hello All, Here's the problem, we have happily set up several Asterisk servers to offer commercial service in the UK, our wholesale SIP termination partner (Magrathea - use SER/CiscoGW to provide us the service on a public IP address) - till now we have used Asterisk to connect clients on private IP's with Asterisk doing the required conversion for SIP/IAX between public and private

Hi, Someone who has had experience with shoretel VoIP systems, can you please give me a run down of how Asterisk is either better or worse? I am completely unfamiliar with Shoretel systems, but someone had suggested we look into them. I said, you bring your Shoretel features, and I'll show you 10 things Asterisk does or can do that Shoretel doesn't do. I still believe that's

I'm not sure that the problem lies in the NAT because the phone is talking to Asterisk. I'm hoping this is a simple config thing I've overlooked but I've tried all kinds of combos inside the [] in my mgcp.cfg file. The phone's IP is 192.168.1.116 (my comp is .110). The router to which the phone and my comp is plugged into has a WAN IP of 10.0.0.28. All the other comps (and SIP

I have a client who is using a Shoretel PBX. This PBX apparently does not send DTMF information OOB, but instead sends this inband via the B-channel. This is traversing an Asterisk box via a PRI. The user calls the IVR (1-800-CALL-DHL), receives audio, but is not able to present DTMF to engage the IVR. With some light research it appears that the DSP is not activating until the call is

SIP user => Asterisk 1.6 server => SIP Trunk => external destination: works AMI script => Asterisk 1.6 server => SIP Trunk => external destination: Failed to authenticate on INVITE to '"asterisk" <sip:asterisk@(ipaddr)>;tag=alphanumeric' I?ve tried doing things like ?include => contextwithtrunk" in various places, googling, re-reading relevant

Hi everyone, I am fairly new to the idea of VoIP, although I've been reading about it off and on for the last few years. Now it is starting to look mature enough to consider implementing it, but there is one thing that I haven't been able to get a clear answer on... With Vonage, you are using the Vonage network - it is their responsibility to route your call to the endpoint, which is

Hi all, I have VOIP network built with MGCP endpoints.The manufacturer of endpoints is ASKEY. I downloaded latest Asterisk software and found it very useful for me. I configured it and it seems taht everything works OK when I am testing it with one or two endpoints. After that I tried to move Asterisk to working network and replace existing call manager. It starts working and calls are

Hey, all. While ADA can still be downloaded, that's about all that I see. No development, no recent mention, and -- perhaps worst of all -- it appears not to work properly under 64-bit systems. So, assuming Digium's abandoned it, are there any suggestions of alternatives? Right now, I'm replacing a Shoretel system, and I'd *dearly* love to avoid the incredibly fat client they

Hi, in following of a recent discussion I got to work on MGCP with the Cisco ATA186 again, and got it to work very nicely. However, there is a little thing with transfers I would like to get comments on: Call comes in from PSTN and goes to an ATA186 (MGCP) Call is answered and then, using flash, transferred to another extension If the extension is available, there can be an announcement and

Hello, I have just received an MGCP Phone for test purpose and I can't place a call from my MGCP Phone. I can call my MGCP phone from a SIP Phone. Here is my mgcp.conf: ; ; MGCP Configuration for Asterisk ; [general] ;port = 2427 ;bindaddr = 0.0.0.0 ;[dlinkgw] ;host = 192.168.0.64 ;context = default ;line => aaln/2 ;line => aaln/1 [192.168.10.10] host = 192.168.10.10 context =

Hello I have a brief and a long question about a possible Asterisk deployment I am planning. Long Story Short: I have four total offices, one main and three remote. All offices are connected using dedicated network T1 lines creating one unified network across offices. I would like to know if it is possible to set up an Asterisk system with the following capabilities: - Branch