similar to: MWI on Cisco 7905

I have a large group of 7960G's running Asterisk 1.2.4 using SIP 7.5. Most of the time the message waiting indicator works fine. Once or twice a day either an MWI is not sent to the phone or the phone misses it. I have not noticed duplicates being sent and I can't figure out the time, if any, a resend is made. Anyone know why I'm missing, loosing or not sending an MWI to the

Hello everyone, My setup: Debian squeeze Asterisk 1.8, DAHDI, libpri, compiled from source TE110P, attached to a Deutsche Telekom Octopus E Modell 300/800 I'm trying to get MWI for Voicemail working. In the same server I have also got an Eicon DIVA PRI card for testing purposes (it is integrated via CAPI and the chan-capi channel driver into my Asterisk). MWI works just fine there. I

Hi All - I'm running version SIP version 1.3.4 on various IP300, IP500, and IP600 Polycom phones. I'm having a tough time with MWI. I thought I remembered somebody on the list saying that they had it working, but I can't find it in the archives now. I have all the phones configured for MWI as specified in the WIKI: ipdmid.cfg: up.oneTouchVoiceMail="1"

Here's a link to it: http://forums.digium.com/viewtopic.php?t=4363&highlight= Regards, Scott -----Original Message----- From: Scott Keagy Sent: Monday, December 04, 2006 5:05 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [asterisk-users] mwi for voicemail not showing up for realtimeconfig. A while back I posted a fully functional though somewhat elaborate

All, I'm using Asterisk 1.6 and using Polycom 500's with SIP firmware 2.1.3. I can not seem to get the Message Waiting Indicator to work reliably (and in my opinion correctly) with voicemail. I've got the following in my phone.cfg: <reginfo> <msg msg.bypassInstantMessage="1"> <mwi msg.mwi.1.callBack="*97"

We have recently pulled an ancient Fujitsu-branded Centigram voicemail system out of production use and replaced it with an Asterisk box, which is now serving as our enterprise voicemail system and automated attendant. The Asterisk system is connected to a Fujitsu F9600 PBX and uses the 1.6.1.x SMDI module to communicate between the two systems. Save for one issue, the replacement of the old

Hello! I'm facing a problem concerning MWI. The problem is: The phone switches off the MWI exactly at the moment the second NOTIFY package for one voice mail arrives. The phone switches off MWI independently if the voice mail has been acknowledged or not before. The behavior in detail: - Once each hour, phone sends SUBSCRIBE - Asterisk receives incoming voice mail for Device 200. - some

Hi guys, is there any way to execute a command *after* a caller has hung up the call? Something like exten => s,1,Voicemail exten => s,2,AGI(mwi.agi) I'd like to turn off the MWI on my cellphone (which is done by gammu[1]) Or does anyone know a way to check the state of the MWI from outside, i.e. with a cron-job? I'm turning on the MWI with the email-notify from voicemail, but

Hi all, When moving from a self compiled Asterisk 13.23.1 to Asterisk 13.24.0, has resulted in a MWI clearing delay of around 5 minutes. After listening to a voicemail and deleting it, the Polycom VVX 601's MWI light is left on for around five minutes, before clearing. Installing Asterisk 13.24.1 did not fix this. Moving back to 13.23.1 allows the MWI to clear immediately. I see a note in

Hi, I am using Asterisk personally at home. My SIP client (SPA 3000) supports MWI with SIP NOTIFY messages. With a previous version of Asterisk I had no problems with MWI. But now I am using the following version which comes with Trixbox 2.8.0.1, and I have problems with MWI. Asterisk 1.6.0.9-samy-r27 Problem description: When a voicemail is left on the extension, a SIP NOTIFY message is sent

hello, I read http://www.voip-info.org/tiki-index.php?page=Asterisk+at+large anybody could tell me more about this ? Is it available with ARA ? Regards Harry Method 3 Q: If you have your SIP phones registered with SER but your voicemail is handled by asterisk, how do you get the MWI (Message Waiting Indicator) light to function on the phone? A: In sip.conf create a section pointing at your

After purchasing the Uniden TRU9480 and then the Panansonic 5672, both of which do not have "phone company" compatible FSK/stutter MWI, I finally got smart and found out just which Panasonic phones have this feature. Only the following 5.8G models in their current line have FXO compatible MWI. I purchased the 5771 unit and one remote. I have confimed it does in fact work with Asterisk

MessageMelissa - I added the "fromuser=AnyName" to my sip.conf file stations and that, in fact, corrected the problem. The MWI now works flawlessly. I would recommend that Aastra/Sayson pursue this with the Asterisk team so that it is listed as a known issue or to have Asterisk patched to fix it. I will submit a bug on it as well. I'm copying the Users Mailing List on this. For

Hello all, I have an Asterisk installation with Kamailio using realtime integration. I have gotten my clients to register, but there is something odd about the sip message flow with some of my clients. My clients are Zoiper and Asterisk is 11.10.2. When I set 'Subscribe to MWI' value to 'both', after a normal, successful registration Asterisk begins to send REGISTER messages to

Does anyone have personal experience with a 5.8gig wireless phone (system) that has an MWI that WORKS with asterisk via fxs (in my case spa3k) generated MWI. I know the spa3k does stuttered dialtone but not sure if it generates FSK MWI. I see some that state they do but I also see reviews that say they don't. Doug

Hello I am running the following setup in order to make VoIP calls at home. Home Phone <-> SPA3000 <-> Asterisk Home <- IAX2 over Internet <-> Asterisk Office The voice mail for Home Phone is hosted on the Asterisk Office machine. I wanted to have a way to check the status of my voicemail on my home phone directly. In order to do so, I've patched both Asterisk Home and

We've been testing (aim:frziegler and aim:end1r) the Voicemail2 app for a few days now, based on a CVS build from Monday, 5/12/03-23:15. Works good! Thanks Mark! We seem to have found a bug in the MWI (Message Waiting Indicator) logic. By simply creating msg0000.txt files in both structures, e.g.: for extension 4000: voicemail1: /var/spool/asterisk/vm/4000/INBOX/msg0000.txt

On 27.12.18 at 18:14 Joshua C. Colp wrote: > On Thu, Dec 27, 2018, at 1:07 PM, Michael Maier wrote: >> Hi! >> >> I just want to say, that 13.24.1 doesn't fix the problem described in >> the posts above. > > You're going to need to file an issue[1] with traces and actual configuration. > > [1] https://issues.asterisk.org/jira > Before I'm

Hi all, I'm having sudden MWI problems. Everything else on the phone works fine though. I have three Cisco 7940s. Asterisk server is behind a firewall running NAT. (192.168.1.202/24) Phone #1 - On the same subnet 192.168.1.250. Everything works great. Phone #2 - On a different subnet, 192.168.2.0/24. Everything works fine except the MWI. It never comes on. This is over an IPSEC VPN, but

Hey there. I've been working on a project to integrate Asterisk with Exchange Unified Messaging via sipX using large parts borrowed from: http://blog.lithiumblue.com/2007/04/accessing-exchange-2007-unified_29.html ... and everything works surprisingly well. The one problem I have is MWI, or a lack thereof. Exchange 2007 doesn't support MWI of any kind (!), so I've been looking into