similar to: g729 passthrough?

Hi all, I have to install 25 IP Phone in some building. I want just basic IP Phones like: Cisco-Linksys SPA922 u$s 146 Grandstream GXP-2000 u$s 105 Snom 300 u$s 119 The most valuables parameters for me are (in importance order from high to low): - Stability (device don't hang in any way) - Voice quality using G729 - Provisioning So what device do

Hi all, I'm trying to connect my Asterisk@Home to iptel.org, but the only I get is Allison telling me "circuit busy now, please call again later" or some thing similar. I'm trying make it by AMP and editing sip.conf and extension.conf, and I read all about it in voip-info.org. I will appreciate your help, Thanks in advance, Sebastian e-mail:smilioto@GMAIL.com IM:

Hi all, I'm using Asterisk 1.2.5 and , for some reason, when I install it, the module app_meetme.so didn't install. Is there some way to download that module, and add it to asterisk without re-install it? Thanks in advance Sebastian

Hi all, I'm new in the forum, and although I have some experience in Asterisk, I've never work with Asterisk FXO, FXS, E1... cards. I have several costumers with ATAs working with my SER. However one of them bought an Alcatel PBX OmniPCX Enterprise and now he wants I give him a E1 interface for interconection with its new PBX. I understand I need a E1-IP gateway which could be Asterisk

Ping -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081121/8392150e/attachment.htm

Hi all, I have around 100 SPA2100 registered in my provider openSER. I'd like to add an Asterisk registered into openSER, to the network, to deploy voicemail service for those SPAs. Due to administration access levels, I have no access to SER box, so I'm wondering if that possible: - Some foreign user (say A) calls one of my SPA (say B). - B don't answer. So.. B SPA is setted up to

Hi All, I have this codec problem, I use "gsm" in my iax.conf file and in teliax settings also, but the error is still appearing as below. please help me. Kumara Starting simple switch on 'Zap/1-1' -- Executing Dial("Zap/1-1","IAX2/kumara@teliax/01194777070239|30|tr") in new stack -- Called kumara@teliax/01194777070239 -- Call accepted by

Greetings! to all Now, with some hard time and help from many genurous people's in the list, I have come to this point with my TDM20B card & my teliax's IAX2 account. I hope someone may help me with this issue mentioned below. I have already selected my codec as gms in my iax.conf as well as in teliax's "my account page" but still i have the same error when I attempt

Hi, I have just signed up with Voxee.com and have attached my Asterisk server to dial them via IAX2. Below is the start of the log which dials the number and promply hangs up when the call is answered, with the logs saying that the channel is not compatiable. I have traced this down to the g.729 codec which I don't have installed. Any ideas on how to force that the codec not be used?

I am trying to create a %100 g729 (with no transcoding) system (using a Soekris, of course). I am running AstLinux with the native sounds, g729 is the only codec allowed, %100 SIP (g729 only allow=) - I think I am covering all of my bases. I have only "format=g729" in voicemail.conf. On an incoming call to a mailbox, everything goes well until recording the message. When the

I am having a problem with one of my callers who is using either g729 or alaw.  I can do alaw but not g729 so asterisk should negotiate alaw right?  In fact from the sip debug it looks like it does, but then I get the dreaded "channel.c:5630 set_format: Unable to find a codec translation path: (g729) -> (alaw)" and the call hangs up.  Why? Last minute thought: Is it possible that

Hello everyone, One more little problem with a %100 g729 setup. Native moh: musiconhold.conf: [default] mode=files directory=/mnt/kd/moh/default random=yes ; Play the files in a random order ls /mnt/kd/moh/default fpm-calm-river.g729 fpm-calm-river.ulaw fpm-sunshine.g729 fpm-sunshine.ulaw fpm-world-mix.g729 fpm-world-mix.ulaw Place a call on hold: Jun 1 14:55:30

On Thu, May 14, 2020 at 11:31 AM John Hughes <john at calva.com> wrote: > On 14/05/2020 08:10, John Hughes wrote: > > I am having a problem with one of my callers who is using either g729 or > alaw. I can do alaw but not g729 so asterisk should negotiate alaw right? > In fact from the sip debug it looks like it does, but then I get the > dreaded "channel.c:5630

Hi i am trying to do the same thing: receive a call from a cisco callmanager and forward it to a SIP user. Asterisk is compiled with h323 support, and is configured as a gateway in the cisco callmanager. h323.conf: [general] port = 1720 bindaddr = 193.x.x.x ; this SHALL contain a single, valid IP address for this machine allow=all extension.conf: exten = 3298,1,Answer exten =

Hi list! My problem: I have three extensions in my Asterisk 1.8.30.0 and they have a voicemail. On two of these numbers the voicemail works without any problem, on the other it doesn't... I get this error: [Oct 17 17:01:29] WARNING[14700]: channel.c:5254 set_format: Unable to find a codec translation path from 0x100 (g729) to 0x2 (gsm) [Oct 17 17:01:29] WARNING[14700]: file.c:957

Hello. I have a codec problem to send calls from a SIP device to a H323 gateway. First I'll explain the scenario: - Asterisk 1.2.1 - The SIP phone can use any codec I want. - The H323 gateway can only use g729 (cause it's not under my administration) - SIP phone has g729 configured, so my asterisk doesn't need to "transcode" (I don't have licences for g729) - sip.conf

Hi all, I've just bought some SPA922. First time with this hardware for me. I see no LAN tab in its web GUI where I can setup NAT for PC conected to its LAN ethernet port. However, when I connect a PC to that port, SPA922 works as bridge. Anybody can confirm SPA922 can NAT a PC connected to its LAN port? Does exist such LAN tab for setting up parameters as port forwarding? (by the way,

Hi Sir, We have integrated Skype with Asterisk (skype user id:- rexesbposolutions). Each call which is coming to skype account is getting transfered to Asterisk Queue. It has following two cases: case 1: When we call from normal skype account to skype account (rexesbposolutions), everything is working fine. case 2: This skype account (rexesbposolutions) has been assigned with a online virtual

Hi, I copied a setup from an older 1.8.5 installation to an 11.15 installation, and I'm having problems getting call files to work. Here is the extension setup I'm using: [outbound-swift] exten => _[a-zA-Z].,1,Answer exten => _[a-zA-Z].,n,Playback(AAA/check_ip_failure) ;exten => _[a-zA-Z].,1,Swift("${EXTEN}") exten => _[a-zA-Z].,n,Goto(1) [mis-phone] exten =>

set_format: Unable to find a codec translation path from ulaw to g729 Both endpoints are PAP2 set to G711 only I have 1.2.17 on Suse 10.1